We couldn't find any barn bedding equipment suppliers or service providers located in Canada

Here is a list of equipment results with suppliers serving Canada

barn bedding equipment available in Canada

  • Barn Equipment

    High-yield cows are supposed to rest for at least 12 hours a day. Only sufficient rest will stimulate the animals' metabolism enough to produce 30 l of milk a day. The following requirements should be met:

    By Arntjen Germany GmbH based in Rastede, GERMANY.

  • Model TS - Tie Stalls Barns

    Tie stall barns have unique demands. We offer DCC Waterbeds TS, a bed with added durability made in the ISO design. The TS is for dairy producers with tie stalls who desire the long-lasting, minimal top-bedding, and comfort advantages of DCC Waterbeds. Learn more about our successes in tie stall bedding.

    By DCC Waterbeds a product of: Advanced Comfort Technology, Inc. based in Sun Prairie, WISCONSIN (USA).

  • Heifer Dry Cow Barn

    Dry cows (non milking cows) and heifers that don’t need the same feed rations and attention are normally housed in a separate building. Ventilation requirements are similar to the main dairy barn. A bedding pak without free stalls is an option. Lots of natural light, low humidity and abundant fresh air is a must for maintaining good health.

    By Sun-North Systems Ltd. based in Seaforth, ONTARIO (CANADA). from Heifer Dry Cow Barn Product line

  • Animattress - Model III - Stall Bed Mattress Systems

    The new Animattress III stall bed is a revolutionary mattress for your stalls.  It was designed for tie stall barns specifically but can be used in free stall barns as well.  It is so easy to install, you can do it yourself! The familiar pebble-top surface that is an Animat trademark is bordered by a sturdy rim and alternately-sized ...

    By Animat Inc based in Sherbrooke, QUEBEC (CANADA). from Stall Bed Mattress Systems Product line

  • Agri-Chopper

    Bedding down animals with big bales is a time consuming and back breaking chore if you do it manually. The Agri-Chopper chops big bales of straw or paper to make fluffy and spongy bedding. Thanks to its powerful blower, it can be used to spread bedding evenly up to 40 feet in free stall barns, hog houses and hen houses.

    By Hanson Silo Company based in Lake Lillian, MINNESOTA (USA). from Agri-Chopper Product line

  • Model V - Manure Vacuum Scraper System

    Barns no longer need to have an integrated manure handling system during construction. The Manure Vacuum replaces the need for pumps, augers, and concrete channels to transport manure from the barn to the storage lagoon or process facility.

    By Mensch Manufacturing, LLC based in Hastings, MICHIGAN (USA). from Manure Vacuum Scraper System Product line

  • Model ck 22 - High-Speed Fan

    The CK-22  high-speed fan is the highest air velocity fan on the market.  Installed on 30 or even 40-foot centers the CK-22 fan has the power to cool cows at both the feed lane and in their free stall beds very effectively! This is the ideal fan for wide barns!

    By CowKool International, Inc. based in Chandler, ARIZONA (USA). from High-Speed Fan Product line

  • Animattress - Livestock Mattress Systems

    Animattress Mattress Systems offer a stall bed for most applications associated with your dairy operation. With superb Cow Comfort being our ultimate goal, we manufacture a stall bed for cows and heifers in three different configurations. Ourstall mattress can be used in either free stall applications or tie stall barns. We know ...

    By Animat Inc based in Sherbrooke, QUEBEC (CANADA). from Livestock Mattress Systems Product line

  • Model M - Mobile Side-Shooter

    The Self Propelled SideShooter will decrease time needed to bed freestalls while reducing amount of material wasted from improper placement.

    By Mensch Manufacturing, LLC based in Hastings, MICHIGAN (USA). from Mobile Side-Shooter Product line

  • Curtain Systems

    The climate in a modern cubicle barn must accommodate the requirements of the dairy cows 100 percent. 'Since the cattle has the nature of a polar animal' (quote, Grauvogel 1994), it prefers dry and cold environments to heat and humidity. A lack of fresh air means:

    By Arntjen Germany GmbH based in Rastede, GERMANY.

  • Promat - Pasture Mat System

    Research has indicated that cows spend an average daily resting time of 15 hrs in pasture, however, when confined to a barn that resting time is significantly less. The Pasture Mat, by Promat, recreates the characteristics of a pasture therefore increasing the amount of rest time.

    By Promat Inc. based in Woodstock, ONTARIO (CANADA). from Pasture Mat System Product line

  • CYCLONE - Model PLUS - Recirculation Fans

    One of our most versatile products is the Cyclone Plus variable speed fiberglass recirculation fan. Tranditional ceiling fans slowly push the hot air from the ceiling down to the floor. The Cyclone Plus can do this on low speed and then as the speed increases;  it creates air velocity for maximum air throw and cooling. In dairy barns, Cyclone ...

    By Ventec based in Saint-Hyacinthe, QUEBEC (CANADA). from Recirculation Fans Product line

  • Thermocal Neutralizer - Soft, White Calcium

    Thermocal Neutralizer is a soft, white calcium. When applied, it creates conditions favorable to workers and livestock. Unlike limestone barnlime, Thermocal Neutralizer is not irritating or harmful to people or livestock. Thermocal Neutralizer reduces odor, absorbs moisture, and enriches manure. It is recommended for barns, feedlots, and poultry ...

    By Van Beek Natural Science based in Orange City, IOWA (USA). from Soft, White Calcium Product line

  • Artex - High Pressure Misting Systems

    Artex high pressure misting systems provide added cow cooling during hot summer months when simply air velocity alone is not enough to cool your herd. With a high-pressure fogging system, micron-sized fog droplets of water are pushed out into the environment and flash evaporated without making contact with the ground. This reduces the ambient ...

    By Artex Barn Solutions based in Abbotsford, BRITISH COLUMBIA (CANADA). from High Pressure Misting Systems Product line

  • Solvita - Model BULK LAB PAK - Manure (Ammonia) Kit

    The Manure (Ammonia) Kit is specially adapted to measure volatile ammonia (NH3) content of compost/manure. Can be used for semi-solid samples in a manner similar to the compost test kit, and in situ to reveal emissions of ammonia from bedding packs. Proven in poultry houses to measure volatization potential from surface litter. The Solvita ammonia ...

    By A&L Canada Laboratories Inc based in London, ONTARIO (CANADA).

  • Artex - Storm Cooling Fans

    Artex Storm fans create the extreme velocity needed to cool cows, control insects, dry bedding and ensure the comfort of your animals and employees. Designed with versatility in mind, Storm fans have adjustable louvers that allow farmers to direct air over and under cows easily. This ensures that airflow is directed straight onto the cow's body ...

    By Artex Barn Solutions based in Abbotsford, BRITISH COLUMBIA (CANADA). from Storm Cooling Fans Product line

  • Tandem Axle Dump Trailers

    Gvwr: 7,000 Lb, Gawr: 3,500 Lb Ea, Coupler: 2 5/16”Coupler (7,000 Lb.), Safety Chains: 1/4' Grd. 70 W/ Safety Latch Hook (2 Ea), Jack: 7,000 Lb Drop Leg Jack, Axle: 2 - 3,500 Lb Cambered Axles W/Elec. Brakes On 1 (Ez Lube), Wheels: 14' X 5 Hole White Spoke, Tires: 205/75 D14 Load Range, Suspension: Multi-Leaf Spring Double Eye, Floor: 11 Ga. ...

    By Trudeau Trailers based in Kingston, ONTARIO (CANADA).

  • Model TR610D Series - Dump Trailers

    GVWR: # 9,990 lbs.. Dry weight: 1,975 lbs.. Payload capacity: 8,015 lbs.. Volume: (level) 3.9 cubic yards. Bed size width x length: 72″ x 119.5″. Deck Height: 31″. Side height: 21″. Tire size: 225/75/15D . Axle capacity: (2) 6000 lbs.. Cylinder bore x length: 3″ x 30″.

    By Coastal Metal Fab based in Topsham, MAINE (USA). from Dump Trailers Product line

  • Unparalleled Comfort Isolated Chambers

    In 2013, we introduced DCC Waterbeds ISO, the 3rd-generation waterbed, and our most comfortable bedding solution yet. The front and rear chambers of the ISO are filled separately. The front pillow provides a consistent cushion for the knees. The rear pillow floats the hocks and udder with more consistency. With a fixed volume of water, DCC ...

    By DCC Waterbeds a product of: Advanced Comfort Technology, Inc. based in Sun Prairie, WISCONSIN (USA).

  • Bale King - Model 5100 - Bale Processors

    Bridgeviewhas over 15 years of experience in bale processing technology and offers a full line of heavy duty, feature rich bale processors that make feeding and bedding livestock and reclamation projects effortless. Bale Kings will process all bales including rounds and squares, straw and silage, soft core and hard core, and twine and net-wrap ...

    By Bridgeview Manufacturing Inc. based in Gerald, SASKATCHEWAN (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you