Only show results in Virginia? Ok

Boom For Harvesting equipment

  • Harvest Booms

    ZEMA harvest beams (1- to 3-level) systematise the work steps during the vegetable harvest and are used in combination with the ZEMA carrier vehicle. The harvesting process is divided into logical work sequences. Depending on the model, 1-, 2- or 3-level,  the efficiency per employee and consequently the productivity increases.

    By Josef Zeyer Stahlbau Agrarsysteme GmbH based in Neresheim, GERMANY. from Harvesting Product line

  • Rigid Harvester

    The Alloway Standard Harvester has a lot of the same great features it had in the past, such as its exclusive curved parabolic elevator which eliminates troublesome spring tension arms and results in less beet damage and losses. The grab rolls, paddle shafts and new chain bed utilize dual drive technology which reduces stress on support bearings ...

    By Alloway Standard Industries based in Fargo, NORTH DAKOTA (USA). from Harvester Product line

  • Model SP-160 - Custom Self-Propelled Four Bed Harvesters

    Mechanical onion harvesting does not get any bigger or better than the SP-160 from Lee Shuknecht & Sons, Inc. This self-propelled four bed unit will harvest and top your onion crop at some of the fastest speeds and capacities currently available. Despite its size and capacity, the SP-160 will gently direct load up to four 40' beds or ...

    By Lee Shuknecht & Sons, Inc. based in Elba, NEW YORK (USA). from Harvesters Product line

  • Bear - 8-Wheeler Harvester

    The 8-wheeler PONSSE Bear is the largest harvester in the Ponsse product range and an unbeatable powerhouse for thick trees and demanding conditions. The product upgrade focuses on efficiency, structural endurance and ease of maintenance and use. At the same time, Bear has seen a complete facelift.

    By Ponsse Plc based in Vieremä, FINLAND. from Harvesters Product line

  • Rottne - Model H8 - Harvester

    ROTTNE H8 is a thinning harvester with unique properties. The two-part chassis with an articulated joint in the centre produces precise tracking, and when combined with its levelling capabilities, the H8 harvester becomes extremely flexible and easily driven and leaves a minimum of damage when working out in the stand!

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • WBM - Ginseng Harvester

    The WBM Ginsenger DLX has been designed and refined to work in almost any field condition you can through at it.  In sandy soil you can harvest fast with very few people making the harvest operation efficient and enjoyable for all involved.  Even in tough heavy or rocky ground, harvesting is still possible with a crew of only 5 or 6 ...

    By Weening Brothers Mfg. Inc. (WBM) based in Bradford, ONTARIO (CANADA). from Harvesters Product line

  • Rottne - Model H11 6WD - Harvester

    The new contender, ROTTNE H11D in a 6-wheel or 8-wheel design, with an articulated steering joint for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint give ROTTNE H11 excellent off-road performance and precise tracking. The harvester cab offers superb operator comfort and excellent visibility over ...

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Rottne - Model H14C - Harvester

    ROTTNE H14C is an easily operated harvester and a real powerhouse. An all-round harvester for both final felling and thinning capabilities. The harvester has a 6-wheel chassis with single rear axle and front portal bogie that ensures excellent ground clearance.

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Model SP-132 - Custom Self-Propelled Two Bed Harvesters

    If you are in the onion industry and you want to maximize your production, it is time to talk to Lee Shuknecht & Sons, Inc. We have been manufacturing mechanical onion harvesting units for over 30 years, and we can help you increase your output while gently handling the produce. The SP-132 is a self-propelled two bed harvester that eliminates ...

    By Lee Shuknecht & Sons, Inc. based in Elba, NEW YORK (USA). from Harvesters Product line

  • Vegetable Harvesting Booms

    Vegcraft specialises in front tractor-mounted booms for harvesting a wide variety of vegetable crops from lettuce and cabbage to fresh herbs and broccoli. We custom design and build each machine, allowing us to fulfil your harvesting needs. The basis of our machines is a strong galvanized steel platform with an aluminium and PVC canopy. All areas ...

    By Vegcraft based in By Arbroath, UNITED KINGDOM.

  • Harvesters

    Forestry and logging operations require tough equipment that can navigate all types of terrain in the most challenging environmental conditions. The best harvesters are capable of felling, de-limbing and bucking trees with minimal effort. If you're looking for the best harvesters for sale in southern California, look no further than Johnson ...

    By Johnson Machinery based in Riverside, CALIFORNIA (USA).

  • Tapio - Model 350 EXS - Stroke Harvesting Head

    Length measuring with measuring wheel. Siemens MiniLogo control system. Siemens Logo TD display. 2 push button boxes, 6 buttons in both boxes connected to Siemens MiniLogo. Push button box holder, 2 pcs. 17x0,75 boom cable from Siemens Minilogo unit to harvesting head. Connectors to boom cable. Covers to connector. Saw bar  .404'  ...

    By Logbear Oy Ltd - Riuttolehto Oy based in Soini, FINLAND. from Tapio Harvester Product line

  • Tigercat - Model H250B - Track Harvesters

    The H250B processor offers harvesting contractors a lower cost alternative to Tigercat's 800 series harvesters while providing far superior productivity to excavator conversions.The new H250B is best suited to roadside processing applications. The efficient load sensing hydraulic system with swing priority delivers simultaneous power to all ...

    By Tigercat Industries Inc. based in Brantford, ONTARIO (CANADA). from Track Harvesters Product line

  • Model 973 - Potato Harvester

    Double L 973 Harvester with Returnflow offers growers greater flexibility and efficiency in the field. With this patent pending technology, the 4-row 973 harvester eases truck changes by allowing the harvester to keep operating while another truck pulls under the harvester. As part of the Returnflow system, cleaning capacity is also greatly ...

    By Double L based in Heyburn, IDAHO (USA). from Potato Harvesters Product line

  • Komatsu - Model XT430-3 & XT430L-3 - Tracked Forestry Harvesters

    The New Komatsu XT430-3 & XT430L-3 boast a modern forestry cab that features a state-of-the-art digital control system and superior ergonomics. Combined with high lift capacity, powerful swing torque, and a robust Komatsu undercarriage the XT430-3 & XT430L-3 deliver high productivity, reliability and durability.

    By Komatsu Forest based in Umeå, SWEDEN. from Tracked Harvesters Product line

  • Feller - Model 300 Series - Bunchers / Harvesters

    Powerful 275 HP Mercedes M906 engine and low fuel consumption. Highly ef€ cient IQAN control system. Oversized cooling package with hydraulically driven, thermostatic, variable speed, reversible suction fan. Electro-proportional controls (No oil in the cab). Superior performance with a hydraulic  ow of 200 gpm (750 l/min). Impressive ...

    By Tanguay based in Roberval, QUEBEC (CANADA). from Feller Bunchers / Harvesters Product line

  • Kesla - Model 13H - Harvester Cranes

    The KESLA 13H series – designed for medium-sized harvesters and known for its excellent geometry and reliability. Reliability and excellent performance are features shared by this model series: a compact but robust slewing system with motor slew provides plenty of slewing torque and a wide slewing angle, along with ensuring a low point of ...

    By KESLA OYJ based in Joensuu, FINLAND. from Forest Machine Cranes Product line

  • Nairn - Model 680 - Grape Harvesters

    The benchmark harvester of all Tow-Behind grape harvesters. With the Nairn picking head, a robust chassis designed to last the years and many options on configuration, this is the most popular harvester available.

    By Reese Group Ltd based in Palmerston North, NEW ZEALAND. from Nairn - Grape Harvesters Product line

  • Nairn - Model 2680 - Grape Harvesters

    The latest addition to the Nairn Self-Propelled Harvester range, this harvester is based on the 680 Tow Behind and offers compact engineering ideally suited to the boutique vineyard with minimal headlands and narrower row widths. Essential for those wanting high quality grapes from vine to winery.

    By Reese Group Ltd based in Palmerston North, NEW ZEALAND. from Nairn - Grape Harvesters Product line

  • Nairn - Model 780 - Grape Harvesters

    Similar to the 680, but with bigger buckets and bigger chassis for bigger vines with bigger crop loads. Ideal for minimal pruned vines and wider cross arms.

    By Reese Group Ltd based in Palmerston North, NEW ZEALAND. from Nairn - Grape Harvesters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you