Only show results in Virginia? Ok

Bush-Cutter Arm equipment

  • Dragon - Model GS - Bush Cutter

    Remotely controlled with cables, spring-loaded anti-shock system on 2nd arm - 20-litre tank - dual direction of rotation -belt-type transmission - motor head with self-levelling system - group-2 pump

    By Calderoni based in Forli, ITALY. from Bush Cutters Product line

  • Emphasis - Bush Cutter for Central Units

    Bush cutter with a hydraulic arm and rotor cutting head, designed to be installed on medium-sized tractors, for maintenance work on motorway and roadside verges, slopes, embankments, riverbanks and rural areas. Models available 5, 6 and 7 metres in length. The longer models have a telescopic end for reaching the furthest points, taking up less ...

    By Hymach s.r.l. based in Stienta (RO), ITALY. from Central Units Product line

  • Esprit - Bush Cutter for Central Units

    Bush cutter with a hydraulic arm and rotor cutting head, designed to be installed on small tractors, for maintenance work on slopes, embankments, riverbanks and rural areas. Available 5.5 metres in length. The articulation of the arm has been designed to carry out close-up cutting without having to move into the road. Its compact size makes it ...

    By Hymach s.r.l. based in Stienta (RO), ITALY. from Central Units Product line

  • Model DHPS - Semi Professional Shrub Arm

    Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 120cm. flail mower, mod. TP 120 (professional) and rotor with knife A, to cut up to 6/7cm, with telescopic device on the second arm. Tractor power required: from 90 to 130 HP.

    By O.S.M.A snc based in Palazzo Pignano (Cr), ITALY. from Shrub Arms Product line

  • Model HXF 2802 - Hedge and Fence Cutter

    Mini loader, front loader, telescopic loader, backhoe loader - most loaders are particularly suitable for having quadsaws or cutterbars fitted. The only requirement is a separate oil outlet that delivers the required amount of oil that varies between 20 and 50 I / min depending on the type of attachment tool. GreenTec offers a complete line of ...

    By GreenTec A/S based in Kolding, DENMARK. from Reach Arm Mower Product line

  • K.T.S - Arm Cutter

    The idea behind the K.T.S timber trailer concept is that the crane and the trailer should be as versatile as possible. An investment which enables you to load timber, dig and cut roadsides constitutes a greater value. You could use your investment for many purposes and all year round.The comfort joint makes it possible to cut in all positions, ...

    By K.T.S Maskiner AB based in Kumla, SWEDEN. from Forestry Product line

  • DoubleHH - Lift Arm Bushing

    Quality Double HH lift arm reducing bushings adapt larger category hitches to smaller category implements. Yellow zinc plated to resist corrosion.

    By Double HH Manufacturing based in Rock Valley, IOWA (USA). from Linkage Parts Product line

  • Bush Hog - Model SM60 - Side Mounted Rotary Cutter

    The rotary cutter for those hard to reach places. Bush Hog’s SM60 is your ideal choice for mowing and maintaining rights of way, drainage ditches, lake dams, embankments and sloping terrain. Available in either 540 or 1,000 RPM models, the SM60 features a 5-feet cutting width, and it attaches to your tractor with a Category ll standard or ...

    By Bush Hog - a member of the Alamo Group based in Selma, ALABAMA (USA). from Boom Mowers Product line

  • Bush Hog - Model PZ Series - Zero Turn Professional Mower

    Everything you need for maximum productivity and comfort year after year. These mowers combine heavy-duty construction and superior performance features with creature comforts designed to enhance the operator’s mowing experience. In a lawn professional’s world, this is the bosses’ personal machine.

    By Bush Hog - a member of the Alamo Group based in Selma, ALABAMA (USA). from Zero Turn and Finishing Mowers Product line

  • Bush Hog - Model P Series - Zero Turn Commercial Mowers

    Bush Hog Performance that will Keep You and Your Customers Satisfied. These mowers are designed for the lawn care professional who needs dependable equipment that can be trusted to perform all day, every day. Rugged, durable, and fast, our Commercial Series mowers are easy to operate and maintain.

    By Bush Hog - a member of the Alamo Group based in Selma, ALABAMA (USA). from Zero Turn and Finishing Mowers Product line

  • Bush Hog - Model RMB - Boom Mowers

    RMB1445-1, RMB1660-1, RMB1865-1 and the PT5 Powertrim-2. The ultimate in versatility, Bush Hog’s rugged, tractor-mounted boom mowers are designed to trim trees, brush or hedges and mow behind guardrails, over fences, down embankments and around ponds. With four models reaching 11 to 18-feet from the tractor centerline, there’s almost ...

    By Bush Hog - a member of the Alamo Group based in Selma, ALABAMA (USA). from Boom Mowers Product line

  • V-Cutter Tree Shear With Hydraulic Grapple Arms

    Safe non-moving blades. No cylinder cycle times between cuts. Fast shearing for small brush diameter less than 8' diameter. Multi trees cut in seconds. Accumulate several trees & sprouts before dumping. Cuts at or below ground level. Long lasting high carbon steel blades. Blades are reversible for even longer wear. Replacement blades ...

    By Alan F Washburn Co. Inc. based in Lamar, MISSOURI (USA). from Others Product line

  • Model ZENIT - Brush Cutter


    By PROJET Agricultural - BGROUP S.p.A. based in Manduria, ITALY. from Brush Cutter Product line

  • Model RME-17 - Boom-Mount Rotary Cutter

    17-Foot Rear-Mount Boom Mower. The cutting edge of versatility with all the quality, service, and dependability you’ve come to expect from a Bush-Whacker. Five-foot rotary cutter with a 17-foot boom arm. With advanced joystick controls of four axis of motion. Independent, pressure compensated hydraulic system with load sensing capabilities. ...

    By Bush-Whacker based in North Little Rock, ARKANSAS (USA). from Boom Cutter Product line

  • Rotary Cutter

    The rotary cutter is designed to cut plant cover on the rows when the temperature conditions increase the evapotranspirative demand, causing the tree and the brush to compete for water.This machine is designed to operate with power from the tractor, while at the same time it is partially suspended with the tractor’s hydraulic arms,  ...

    By Moresil, S.L based in Posadas, SPAIN. from Cutters and Shredder Product line

  • Boom Mounted Low Flow Cutter-Head

    THE ONLY HEAVY-DUTY CUTTER HEAD ON THE MARKET THAT WEIGHS LESS THAN 1,000 POUNDS AND CAN HANDLE HYDRAULIC FLOWS UP TO 40 GPM; Designed for small tractors with a boom arm and for mini-excavators / track hoes. With the Boom Mounted cutter-head,  you will cut more wood in less time than with any competitor in its class. With less weight and ...

    By Gyro-Trac Corporation based in Summerville, SOUTH CAROLINA (USA). from Cutter Heads Product line

  • Dual Profi - Double Action System

    The system brings a substantial working comfort to the operator, due to a drastic reduction of vibrations. Less effort and more efficiency.. Wears and derangement resulting of vibrations decrease, with consequent saving in terms of spare parts and deadlocks of the machine. The investment cost will be amortised over a short time.  Through the ...

    By Losi Vittorio S.N.C based in MINERBIO (BO), ITALY. from Cutter Bars Product line

  • Vermeer - Model SW5500 - Silage Wrapper

    The SW5500 Silage Wrapper is designed to enhance operator conveniences and boost production output and is an ideal system for operations with extensive silage baling work. A rugged, turning table spins the bale. Pre-stretched film tightly wraps the bale, sealing in important nutritional forages. And a heavy-duty turntable, with special ground ...

    By Vermeer based in Pella, IOWA (USA). from Stump Cutters Product line

  • Batwing - Model BW1260X - Rotary Cutters

    10.5-foot Extreme-Duty Single-Wing Cutter. Main driveline: Cat 6 CV or Cat 5 heavy 3 joint. Tractor HP range: 65-250 hp. Side frame depth of 13 inches increases cut material capacity. Choice of right or left wing. Massive, heavy-duty gearboxes have blade tip speeds of 16,000 fpm, delivering more cutting power and performance. Fully baffled deck ...

    By Woods Equipment Company based in Oregon, ILLINOIS (USA). from Rotary Cutters Product line

  • Model HS75HR - Hedge Cutter

    Hedge cutter with a working width of 75 cm. The Becx HS75HR is the smallest and newest machine in the hedge cutter range from Becx Machines. This hedge cutter with two cutter heads is an entirely new design. Its small size means it weighs very little and requires only a small amount of oilflow. The HS75HR is therefore compatible with even the ...

    By Becx Machine | Buiten Gewoon Becx based in Moergestel, NETHERLANDS. from Hedge Cutters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you