cattle Equipment in Ontario

  • Dairy Cattle

    At Shur-Gain we understand that producing high quality dairy milk profitably is a complex business. Our teams of dairy advisors, dealers, researchers and nutritionists have the resources and knowledge to make a difference to your dairy operation. Shur-Gain Dairy Nutrition Advisors (DNA) and dealers are valued and dependable partners, who work ...

    By Nutreco Canada Inc. based in Guelph, ONTARIO (CANADA).

  • Beef Cattle

    Improving average daily gains at the lowest input cost is challenging, even with good commodity prices. At Landmark Feeds our teams of advisors, researchers and nutritionists have the resources and knowledge to make a difference to your beef operation. Landmark Feeds Nutrition Advisors are valued and dependable partners, who work in collaboration ...

    By Nutreco Canada Inc. based in Guelph, ONTARIO (CANADA).

  • Model D90B - Cattle Chute

    88” x 32” inside dimensions. Both side panels open. Access door to neck area. Width adjustable. Weight: 960 lbs.

    By E.S. Martin Welding based in Linwood, ONTARIO (CANADA).

  • Smale Cattle Penning

    When all the rest are missing in action... SMALE GATES are outstanding in your field, barnyard or feedlot. Extra heavy duty 1 5/8' high tensile steel tubing. All welded construction makes this gate dependable for decades. Powder coated in bright yellow for extra protection against corrosion. Smale penning is by far the least expensive cost per ...

    By W.R. Smale Co. (1979) Ltd. based in Mossley, ONTARIO (CANADA). from Livestock Equipments Product line

  • JHacidificationNH4+ - Manure Cattle

    In the JHacidificationNH4 + plant liquid manure is mixed with sulfuric acid to adjust the pH value from about 7 to 5-6. When the pH value of the manure is lowered, ammonia is converted to ammonium. Ammonium does not evaporate, and therefore harmfull ammonia volatilization is reduced – by up to 50 % from cow stables.

    By JH Agro A/S Distributor in ONTARIO (CANADA). from Manure Treatment Product line

  • E-Z - Cattlebrush

    Makes cattle content Saves wear and tear on doorways, gates, posts etc.. Special nylon brushes provide long use - the quality of the bristles on our brushes is Outstanding Completely galvanized 2 Year Guarantee

    By A&A E-Z Brush & Oiler Inc. based in Strathroy, ONTARIO (CANADA).

  • Model E-Z - Pasture Pump

    Always fresh drinking water available for your cattle.  Draw water out of creek, pond, stream or well without using electricity.  Protect water source from fecal contaminants.  Easy for livestock to use - cows, calves, horses.  Each pump serves 25-30 cattle.  Draws water horizontally, uphill or 18-20 feet straight ...

    By A&A E-Z Brush & Oiler Inc. based in Strathroy, ONTARIO (CANADA).

  • Curtain Systems

    The climate in a modern cubicle barn must accommodate the requirements of the dairy cows 100 percent. 'Since the cattle has the nature of a polar animal' (quote, Grauvogel 1994), it prefers dry and cold environments to heat and humidity. A lack of fresh air means:

    By Arntjen Germany GmbH Office in Innerkip, ONTARIO (CANADA).

  • E-Z - Hoofcare Frame

     Always available in a place familiar to the cattlel.  Attaches to any type of stall.  Treat cattle for numerous conditions immediately.  Solidly constructed with a safety winch. Can also be used for teat and udder treatments. Dimensions: 43'.

    By A&A E-Z Brush & Oiler Inc. based in Strathroy, ONTARIO (CANADA).

  • Cow Brush

    This is what it was like in the past: In a stanchion barn housing 40 cows on a farm run by a sprightly grandpa, all cows are and brushed individually and all tails are washed and combed on a regular basis. This turned the herd of cattle into a feast for one's eyes to be beheld on a Sunday visit. The situation is diametrically different today. ...

    By Arntjen Germany GmbH Office in Innerkip, ONTARIO (CANADA).

  • John BM - Feeder Wagons

    Constructed of heavy-duty 12 ga steel • 4000 lb. 6 bolt hub and spindle with 16” 10-ply truck tires • Feeds round or square bales, chopped green feeds and TMR • Optional plywood inserts for feeding silage • “V” Floor easy feed flow to any size cattle • Quick hitch tongue • Removable tongue hitch ...

    By John BM Manufacturing Inc based in St Clement, ONTARIO (CANADA).

  • Model TD - Top Down Curtain Systems

    Curtains are permanently fastened at the bottom of the opening and lowered (opened) from the top. In cold weather the initial air enters high on the sidewall to ensure ventilation with minimum draft. This economical single curtain system is often employed for dairy and beef cattle housing. TD curtains are available from 3'-8' heights with a ...

    By Faromor Ltd based in Shakespeare, ONTARIO (CANADA). from Dairy Industry Ventilation Product line

  • LED Light

    Cattle barns underwent a great deal of modernization over the last few years both in terms of design and equipment. However, there is one area that has remained largely unaffected: lighting technology. The new LED-TRIPLEX-LAMP represents a major leap forward as far as providing the best possible lighting conditions! It is now sufficient to install ...

    By Arntjen Germany GmbH Office in Innerkip, ONTARIO (CANADA).

  • Model AW - CH - Flexible Chain Harrowing Systems

    3-inch teeth are angled 45 degrees for heller trash harrowing and lighter harrowing action on one side. 3-inch teeth are angled 15 degrees on the opposite side for more rigid harrowing action.  This harrow, arrangement, conditions, because of its unique tooth is self-cleaning under most

    By AerWay - Holland Group of Companies Office in Norwich, ONTARIO (CANADA). from Agricultural Product line

  • Model CMWC - Weigh Chute

    5000 lb. electronic scale. Sturdy Cage. Vertical Slide Door Entrance. Hinged swing door exit. Available with cross slide doors and / or undercarriage.

    By E.S. Martin Welding based in Linwood, ONTARIO (CANADA).

  • Door System

    Arntjen has the right door system for every specific purpose. The technology integrated into our folding doors is safe and convenientand can easily be controlled with a remote control. They have proven fit for practical use for many years. One drawback is, however,that each meter of passage height requires approx. 17 cm of storage space as the ...

    By Arntjen Germany GmbH Office in Innerkip, ONTARIO (CANADA).

  • Flax Oil & Flax Pellets

    Flaxseed is the richest known food source of omega-3 fatty acids, in addition to its many other benefits. Flax provides essential nutrients, including protein, essential fatty acids, vitamins and minerals. It is also a good source of both soluble and insoluble dietary fiber as well as a rich source of lignans. Lignans are phytoestrogens, ...

    By Bio-Ag Consultants & Distributors Inc. based in Wellesley, ONTARIO (CANADA). from Feed Supplements Product line

  • AMPLI-Calf - 22% Medicated Calf Starter (pellet)

    AMPLI-Calf Medicated Calf Starter stimulates intakes to maximize calf development. It promotes quicker development, allowing heifers to be weaned and therefore bred more quickly. AMPLI-Calf allows for optimal calf growth by enhancing intakes, stimulating gut development and utilizing immune modulating compounds. Feeding AMPLI-Calf optimizes ...

    By Masterfeeds based in London, ONTARIO (CANADA). from Starters/Growers Product line

  • Pointer - Horizontal Self Propelled Cutter Mixer Wagon

    Pointer is the new horizontal self-propelled with the innovative cutting and mixing system “Fast-Cut Multiflow, for a fast and homogeneous mix of all the ration’s components for the cattle. Specifically designed for small and medium-sized farms, Pointer offers a wide range of advantages for a skilled breeder:

    By Storti S.p.A. Distributor in Wyoming, ONTARIO (CANADA). from Horizontal Self-Propelled Product line

  • Model 600 - Bale Slicer

    Remlinger Manufacturing offers the PFM Series 600 Bale Slicer for indoor/outdoor feeding or bedding of dairy or beef cattle. Picks up, carries and slices bales with minimum downtime and service. Designed for skid steer loaders, with optional 3-point hitch built to fit all category 2-3 tractors.

    By Remlinger Manufacturing Distributor in St.Marys, ONTARIO (CANADA). from PFM Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you