cattle Equipment in United Kingdom

  • Arts-Way - Model Cattle Maxx - Cattle Ration Processing

    The Art's-Way Cattle Maxx offers today's beef and dairy operations rolled feed in a quality and consistant ration mix. Both 20 and 30 inch heavy-duty rollermills are available with 10 inch diameter 5, 7 or 10 groove flat or sharp rolls. It is available in either 105 or 165 Bushel capacity. Lower horsepower requirements of the rollermill provide ...

    By Stewkley Milling Services based in LEIGHTON BUZZARD, BEDS, UNITED KINGDOM.

  • Model A1000 - Squeeze Crush

    IAE’s A1000 Squeeze crush has all the features of the A1000 professional range cattle crush but with the addition of squeeze sides. With over 25 years experience in manufacturing cattle crushes we know our new A1000 squeeze crush has many unique features, is easy to use and we believe probably the best available in today’s market ...

    By IAE based in Stoke-on-Trent, UNITED KINGDOM. from Cattle Crushes Product line

  • Warrior - Galvanised

    The Warrior is another basic entry level crush complete with a traditional yoke. This crush is designed for slightly larger herds for light use such as inspection, drenching, tagging etc.Yoke Features* Adjustable neck yoke allowing four settings for widths from 100 to 250mm* Yoke operating mechanism supplied as right hand, but can be easily ...

    By McVeigh Parker fencing based in Reading, UNITED KINGDOM. from Cattle Crushes Product line

  • Barley Beef Feeders

    10 feet wide single-sided. They have a flap on the lid to guide the food into the hopper so there is no spillage when using an 8ft wide bucket. Adjustable slides to regulate the flow of feed into the trough. 1 tonne capacity. Creep gates available. Also available: 6 ft and 8 ft galvanised single and double-sided barley beef feeders with adjustable ...

    By Penderfeed Livestock Equipment based in BERWICKSHIRE, UNITED KINGDOM. from Cattle Feeding Product line

  • Barrier and Trough Units

    The tractor side of the Middlefield type trough is higher than the cow side, which stops so much food being nosed out. Silage feed bunkers are made with 3.2mm steel plate and can be any length up to 20ft. They can be moved with pallet fork positions underneath. The Standard Silage Bunker has diagonal barriers on three sides.

    By Penderfeed Livestock Equipment based in BERWICKSHIRE, UNITED KINGDOM. from Cattle Feeding Product line

  • Model 500-03 - Welland Crush

    An ideal all round crush, perfect for tagging, injecting and TB testing. Adjustable width yoke, sliding access gates, anti-slip battens, galvanized chequer plate floor, 3-point linkage, backing up bar, 9mm thick rot resistant and noise deadening Stokbord clad sides. Restrains popular commercial beef and dairy breeds, from approximately 250kg up to ...

    By LM Bateman & Co. Ltd. based in Staffordshire, UNITED KINGDOM. from Cattle Crushes Product line

  • Universal - Model 500-05 - Heavy Duty General Purpose Cattle Crush

    Heavy duty general purpose cattle crush, suitable for checking ear tags, injecting and general veterinary treatment. Yokes contain TB doors as standard for easy neck access. Restrains popular commercial beef and dairy breeds, from approximately 250kg to 1000kg. N.B. Foot Trim package not available for this crush.

    By LM Bateman & Co. Ltd. based in Staffordshire, UNITED KINGDOM. from Cattle Crushes Product line

  • Model M1000 - Cattle Crush

    The new M1000 yoke represents the pinnacle of manual yoke design and encompasses the foremost yoke concepts and everything IAE have learned in over 25 years of yoke manufacture and development. Speed is a key feature of the M1000. A sliding gate design, the yoke is positioned manually using the smooth action operating handle. At whatever point the ...

    By IAE based in Stoke-on-Trent, UNITED KINGDOM. from Cattle Crushes Product line

  • Cattle Crush

    A heavy duty fully galvanised cattle crush with the latest head yoke fully adjustable for large and small animals. Four pressed steel doors on each side of the crush allow complete access with no vertical or horizontal bars. All doors open fully outwards for clipping and if an animal goes down during calving it can rise with ease.

    By LivestockEquipment.Co.UK based in N. Yorkshire, UNITED KINGDOM.

  • Cattle Box

    Ranch Trucks & Trailers are proud to hold a long-established relationship in working with Mertrux to provide their customers with commercial vehicle bodies which meet their individual specifications. Below are examples of a range of completed vehicles from curtain siders to GRP Box Bodies.  We provide sign writing and paint spraying to ...

    By Ranch Trailers based in Bingham, UNITED KINGDOM. from Commercial Vehicle Bodies Product line

  • Cattle Grids

    Triangle fabricates and installs Highway Cattle Grids to BS4008:2006, including all ground work, concreting and tar macadam, for any road spans. All our grids include:Full galvanising or optional primed/painted.Steel nosings.Drainage.Grid depth up to 320mm (highway/motorway).Very little maintenance.Fencing and gates (footpath and bridleway).Ramps ...

    By Triangle Ltd based in Fordingbridge, UNITED KINGDOM. from Product Line Product line

  • Ambassador Yoke Cage

    Designed for all variety of breeds including horned due to the unique yoke, which squeezes in simultaneously from each side. Easily connected to portable hurdles via coupling rods.

    By Agritec UK Ltd based in Somerset, UNITED KINGDOM. from Cattle Products - Handling Product line

  • Premier Livestock - Unistock Forward Catch Cattle Headgate

    The new Unistock Forward Catch Cattle Headgate, winner of the Dr Alban Davies Trophy 2011, is robustly built and can be fitted to the Unistock Cattle Crate MK1, Unistock Cattle Crate MK2 and the Unistock Mobile Cattle Crate or supplied on its own for use in a race system. It has been designed to meet the need of farmers who still require the ease ...

    By Premier Livestock Handling based in Dalbeattie, UNITED KINGDOM. from Unistock Cattle Crates And Headgates Product line

  • Model 510-12 - Ambassador Yoke Gate

    This yoke is used on the front of our Ambassador crush. Designed for all variety of breeds including horned due to the unique yoke, which squeezes in simultaneously from each side and is adjustable before or during entrapment. N.B. Has removable panels to allow addition of chin scoop

    By LM Bateman & Co. Ltd. based in Staffordshire, UNITED KINGDOM. from Portable Cattle Handling Product line

  • Cow Diagonal Barrier

    60mm & 76mm barrier. Spring Steel top and bottom bar. Adjustable end pieces for easy installation. Tag safe diagonal bar. Heifer guard closing small spaces. Reduced feed wastage. Due to its design it eliminates calves escaping onto feed passage.

    By Teemore Engineering Ltd based in Co Fermanagh, UNITED KINGDOM. from Cattle Equipment - Feed Barriers Product line

  • Fast Empty Drinker

    Adjustable legs for correct height positioning. Floor sloping to draining valve for effective drainage. 75mm Fast empty valve. No complicated moving parts. Option for wall mounting available. Fully galvanised. Fast access lid.

    By Teemore Engineering Ltd based in Co Fermanagh, UNITED KINGDOM. from Cattle Equipment - Drinkers Product line

  • Axial Headlock

    Adjustable Collar Width. Adjustable end pieces for ease of installation. Can open from both sides. Calf/heifer guards to close small dangerous spaces. Pendulum bar bushed at pivot point.

    By Teemore Engineering Ltd based in Co Fermanagh, UNITED KINGDOM. from Cattle Equipment - Feed Barriers Product line

  • Economy Calf Creep Feeder

    Economy calf creep feeder with 3-point linkage, forklift channels, full length lid and width/height adjustable creep apertures. (Smaller constructional RHS than heavy duty unit- still comes fully assembled) 310kg capacity hooper.

    By Agritec UK Ltd based in Somerset, UNITED KINGDOM. from Cattle Products - Feeding Product line

  • Barley Beef Feeder

    Hopper capacity: 1.06 cu m (99.43 Kg barley). Fabricated from 2mm steel plate and 100mm angle. 2.50m long, 80cm wide, 160cm high. Painted or galvanised. The hinged lid is 130cm wide to protect the feed area from the elements when closed. It opens to allow the feeder to be filled with a handler bucket.

    By Glendale Engineering (Milfield) Ltd based in Northumberland, UNITED KINGDOM. from Cattle Feeding Equipment Product line

  • Cattle Hopper Feeder

    18 feeding spaces. Avoids waste. Strong robust hopper made from external grade plywood. 8ft or 10ft long x 5ft 8ins wide. On skids to enable easy movement. Optional hinged door for removing waste.

    By Glendale Engineering (Milfield) Ltd based in Northumberland, UNITED KINGDOM. from Cattle Feeding Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you