Cattle equipment in Colorado

  • Model 2 - Single File Chute

    The single file chute (race) enters a small 24-feet (8m) x 30-feet (10m) covered work area over the squeeze chute. Doors at both the entrance and exit to the building allow the building to be closed and locked when not in use. The building is small enough to heat in the winter, and ventilated to keep people handling cattle cool in winter.

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Feedyard Cattle Handling Systems Product line

  • Model 1 - Research Feed Yard System

    Colorado State University Cattle Research Station (ARDEC). This facility is a good model for a small to medium sized feed yard handling system. The radius for the wide curved lane is 20-feet (6.5m). The solid sided wide curved lane hold approximately 50 cattle. Cattle move through the curved lane into the crowd pen. From the crowd pen cattle can ...

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Feedyard Cattle Handling Systems Product line

  • Model 3 - Single File Chute

    Selector gates in the crowd pen direct cattle into either the single file chute toward the squeeze chute (crush), to the large truck (lorry) loading ramp, or into a stock (utility) trailer chute. This facility also has a single file chute leading to a row of palpation chutes for students to practice palpating cows for pregnancy testing, or for ...

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Feedyard Cattle Handling Systems Product line

  • Model 3 - Cattle Corral System

    Cattle Corral with curved single-file chute (race) and round crowd pen. The fence posts are all 2-7/8-inch (7.30cm) O.D. used oil field pipe. In the areas with solid fence, the maximum distance between the fence posts is 4-feet (1.2m). Space posts no more than 8-feet (2.5m) apart in areas of the corral where the fence is not solid. The raised ...

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Ranch Corrals Product line

  • Model 1 - Cattle Ranch Corral System

    Cattle Ranch Corral System. A curved cattle handling system works on the principle that cattle always prefer to return to where they came from. Cattle in the wide curved lane on the right side of the photo move willingly towards the crowd pen in the center. From the crowd pen cattle then move into the single file chute on the left side of the ...

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Ranch Corrals Product line

  • Model 4 - Curved Cattle Handling System

    Curved Cattle Handling System on a cow-calf operation in Wisconsin, USA. Waseda Farms is an organic beef farm located in Door County. The squeeze chute is inside the covered work area. Visit wasedafarms.com for more information on this company.

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Ranch Corrals Product line

  • Merritt - Livestock Trailers - Cattle Only

    Welded 3” I beam cross members coupled with “Super High Grip” diamond plate floors with unsurpassed diamond height and edge sharpness and you have the long-life, leak-resistant floor that Merritt has always been known for. Lower rear partition gate has been widened to 55' to help reduce bruising. You can operate the ramp lid with ...

    By Merritt Equipment Company based in Henderson, COLORADO (USA). from Livestock Trailers - Tandem Axle Product line

  • Electronic Identification Cattle Tags

    Official cattle tags or standard EID (electronic identification)  tags also known as RFID? Choose the EZid HDX Tag, the smarter tamper evident tag for Cattle.

    By EZid LLC based in Greeley, COLORADO (USA). from Other Products Product line

  • Model 2 - Small Ranch Cattle Corral System

    This system was built by Mark Deesing, Grandin Livestock Handling Systems, Inc., and is used as a model for contractors, and ranch owners to visit. It was custom designed to fit the site and adjacent to a calving barn. Cattle load out by moving through the system then onto a stock trailer chute at the end of the straight alley.

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Ranch Corrals Product line

  • Model 1 - Large High Speed Cattle Slaughter Plant

    Large high speed Cattle slaughter plant serpentine. The facility is designed with a revolving double gate system in the crowd pen and two single file chutes (race). One chute is the primary; the second auxiliary chute is used in the case of an animal down in the primary chute. Each chute is 30-inches (76.20cm) wide, and 66-inches (167cm) high.

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Slaughter Plants Product line

  • Model 2 - Half Circle Concrete Crowd Pen

    Half circle concrete crowd pen in large cattle slaughter plant. A single file chute 30-inch (76.20cm) wide and 66-inches high (167cm) is used. The round crowd pen is efficient because it takes advantage of the natural tendency of cattle to go back where they came from.

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Slaughter Plants Product line

  • Filson - Model CX - Heavy Duty Chute / Cattle Crush

    Features: Recommended for animals over 1200 lbs. Adjustable width on floor. All Controls centrally located. Side 'V'  squeeze. One man operating chute. Easy adjustments for different size livestock. Front and side exits. Swing out side U-bars and drop lower side panels. Right or left hand controls. Portable or stationary. All steel. Head Gate ...

    By Filson Livestock Equipment Distributor in Commerce City, COLORADO (USA). from Cattle Chutes Product line

  • Filson - Automatic Heavy Duty Chute / Cattle Crush

    All controls centrally located. One man operating chute. Easy Adjustments for different size livestock. Front and side exits. Vertical drop bars and side panels. Right or left hand controls. Portable or stationary. Head Gate - Automatic or Manual. Wood or Steel Floor. Wood or Steel Sides. Also known as 'cattle crushes' in the UK. Chute is shown ...

    By Filson Livestock Equipment Distributor in Commerce City, COLORADO (USA). from Cattle Chutes Product line

  • Model 3 - Slaughter Plants

    A 30 degree funnel into the single file chute does not look dead-ended to the cattle. The cattle enter the single file chute with a minimum of encouragement from the handler with the flag stick on the outside of the crowd pen. An auxiliary chute is used to prevent breaks in the line if an animal goes down in the primary chute. Handling in this ...

    By Grandin Livestock Handling Systems Inc based in Fort Collins, COLORADO (USA). from Slaughter Plants Product line

  • Model KW 614LP - Waste Composters

    Traversing a windrow of cattle manure.  Our most popular model.  Engine Horsepower:  300-360. Tunnel Size:  6' H x 14' W

    By Resource Recovery Systems International, Inc. (RRSI) based in Sterling, COLORADO (USA).

  • Filson - Automatic Cattle Head Gate

    This head gate catches the animal automatically.  When the side panels are in the inward position, the opening is large enough to allow passage of the animal's head.  When the animal's shoulders hit the side panels, the head gate closes locking the head in place.  To release the animal, move the panels to an outward position. Head ...

    By Filson Livestock Equipment Distributor in Commerce City, COLORADO (USA). from Head Gates Product line

  • Filson - Model XL - Automatic Cattle Head Gate

    The XL Automatic Head Gate is designed for larger breeds of cattle.  Constructed of heavier materials, it has the same features and ease of operation found in the automatic Head Gate. Gate is shown with optional Nose Bar.

    By Filson Livestock Equipment Distributor in Commerce City, COLORADO (USA). from Head Gates Product line

  • Filson - Model XLT - Manual Cattle Head Gate

    This stanchion type head gate can be mounted on the XL Chute or the Standard Chute - in place of the Automatic Head Gate. The locking device on this head gate is a ratchet-type. Nose chain is standard. This head gate is ideal for horned cattle.

    By Filson Livestock Equipment Distributor in Commerce City, COLORADO (USA). from Head Gates Product line

  • Animal Technologies

    Animal Health International Animal Technologies Division offers advanced management software systems to assist feeding operations in better managing assets, inventories, commodities, and maintenance of financial records that are vital to cattle-feeding customers, enabling them to reduce feed shrink and expenses.

    By Animal Health International Inc based in Greeley, COLORADO (USA).

  • Parker Ag - Paunch Use in Undigested Feed and Food

    The undigested feed and food that is removed from the first division of the stomach of a ruminant animal, typically cattle, in which most food collects immediately after being swallowed and from which it is later returned to the mouth as cud for thorough chewing.

    By Parker Ag Services, LLC based in Limon, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you