Cattle equipment in Nebraska

  • Model EZMT - Portable Cattle Feeder

    These portable two piece bale feeders are made to un-pin and open up easily. The round frame is made out of 1.66 dia 14ga tubing and the the slant bars are a 1.25 14ga tubing with 16' of sheet metal covering the bottom sections of the bale feeders.             

    By Linn Post & Pipe Supply Inc. Office in Creighton, NEBRASKA (USA). from Cattle Feeders Product line

  • Brute - Double Alley & Tub Systems

    Brute Cattle Facilities are designed to increase the cattles' natural flows. The tub incorporates safety with a natural exit into the working alley. This happens while keeping the cattlemen at a safe distance outside the tub. By removing the close contact of being inside a closed pen, cattlemen are safe while still being able to move the cattle ...

    By Dodge Manufacturing Co. based in Dodge, NEBRASKA (USA). from Cattle Facilities Product line

  • Brute - Double Wedge Alley

    Brute Double Wedge alley is the cream of  the crop working facilities.  Does your operation run weaned calves to finish?   The wedge alley design will handle your 4 weights to your largest fat animal  without having to adjust or worry about cattle turning around. The largest feedyards in the world place our double ...

    By Dodge Manufacturing Co. based in Dodge, NEBRASKA (USA). from Cattle Facilities Product line

  • Round Bale Feeders

    These portable two piece bale feeders are made to un-pin and open up easily. The round frame is made out of 1.66 dia 14ga tubing and the the slant bars are a 1.25 14ga tubing with 16' of sheet metal covering the bottom sections of the bale feeders.

    By Linn Post & Pipe Supply Inc. Office in Creighton, NEBRASKA (USA). from Cattle Feeders Product line

  • Model CL-5 - Utility Headgate

    Perfect for small herds. Either manual or self-catch operation. Left-hand or right-hand operation. Mounts to alleyway or any of our Big Valley chutes. Recommended for Alley Headgate Stand. LMXV Squeeze Chute Portable Care Center

    By Behlen Manufacturing Co. based in Columbus, NEBRASKA (USA). from Cattle Management Product line

  • Brute - Tub & Gate

    Operators in the field have noticed vast improvements in cattle processing.  With proper flows out of the tub into the alley, the cattle are under less stress for easier processing.  The double alley keeps the cattle moving in a forward direction with minimal interaction from the cattlemen.  With increased capacity ...

    By Dodge Manufacturing Co. based in Dodge, NEBRASKA (USA). from Cattle Facilities Product line

  • Model M-Series - Self-Catch Headgate

    M-Series Self-Catch Headgate is adjustable from both sides for a more precise fit and increased safety. Adjusts to handle livestock from 300 lbs and up and has pins to allow for quick adjustment of width of opening. Attaches to any Behlen Country chute, right or left-hand operation. Recommended for M1 and M1-V Behlen Country chutes.

    By Behlen Manufacturing Co. based in Columbus, NEBRASKA (USA). from Cattle Management Product line

  • Cattle Sweep Tubs

    Complete your cattle handling system with a sweep tub designed for your needs. Our sweep tubs, just like other Pearson system components, are durable, versatile and built in the USA.

    By Pearson Livestock Systems Office in Thedford, NEBRASKA (USA).

  • xForce - Manual Hydraulic Chutes for Cattle Head Control

    Pearson Livestock Equipment is proud to introduce our xForce line of livestock handling equipment. Using the power and convenience of hydraulics, you can multiply your effort and increase the head control of your manual chute with no electric power. The best part? You can bolt it on to your existing Pearson manual chute (1993 or ...

    By Pearson Livestock Systems Office in Thedford, NEBRASKA (USA).

  • Penzyme - Milk Test Kit

    Penzyme is an enzymatic test that permits fast detection in milk of beta lactam antibiotics used in the prevention and treatment of cattle diseases, in particular mastitis.

    By Neogen Corporation Office in Lincoln, NEBRASKA (USA). from Antibiotic Residue Diagnostics Product line

  • Daniels - Stationary Alley Ways

    Our Stationary Alley Way is the fastt'^t, easiest ami safest way to process cattle in a straight line!

    By Daniels Manufacturing Co. based in Ainsworth, NEBRASKA (USA). from Alleyway Product line

  • Model 28 w/18 - Portable Tub & Alleyway Systems

    The  28’ Portable Tub with an 18’ alleyway offers you a system that can be set up and ready to work cattle in minutes and safer than ever before. Built in palpation cage and overhead no back come standard and give the operator more options when working cattle in a portable setting.

    By Linn Post & Pipe Supply Inc. Office in Creighton, NEBRASKA (USA).

  • Daniels - Telescoping Bale & Loose Hay Feeder

    7x14' sides work in as livestock eats, ranchers say cattle waste much less hay with this feeder than others they use. Panels can be used for portable corral panels in otf season.

    By Daniels Manufacturing Co. based in Ainsworth, NEBRASKA (USA). from Gates & Panels Product line

  • Bale Feeder/Calf Shelter

    Cows feed out of 14' two bale feeder while calves keep warm and safely not underfoot in the 10' calf shelter. When bales are almost gone just slide the calf shelter over the remaining hay for fresh bedding for the calves. The Bale Feeder will save you hay and the whole unit is 'Built Stronger to Last Longer' like all Rancher's products.

    By Ranchers Livestock Equipment Distributor in Arcadia, NEBRASKA (USA). from Bale Feeders for Cattle Product line

  • Filson - Automatic Heavy Duty Chute / Cattle Crush

    All controls centrally located. One man operating chute. Easy Adjustments for different size livestock. Front and side exits. Vertical drop bars and side panels. Right or left hand controls. Portable or stationary. Head Gate - Automatic or Manual. Wood or Steel Floor. Wood or Steel Sides. Also known as 'cattle crushes' in the UK. Chute is shown ...

    By Filson Livestock Equipment Distributor in Ericson, NEBRASKA (USA). from Cattle Chutes Product line

  • Filson - Model CX - Heavy Duty Chute / Cattle Crush

    Features: Recommended for animals over 1200 lbs. Adjustable width on floor. All Controls centrally located. Side 'V'  squeeze. One man operating chute. Easy adjustments for different size livestock. Front and side exits. Swing out side U-bars and drop lower side panels. Right or left hand controls. Portable or stationary. All steel. Head Gate ...

    By Filson Livestock Equipment Distributor in Ericson, NEBRASKA (USA). from Cattle Chutes Product line

  • Filson - Automatic Cattle Head Gate

    This head gate catches the animal automatically.  When the side panels are in the inward position, the opening is large enough to allow passage of the animal's head.  When the animal's shoulders hit the side panels, the head gate closes locking the head in place.  To release the animal, move the panels to an outward position. Head ...

    By Filson Livestock Equipment Distributor in Ericson, NEBRASKA (USA). from Head Gates Product line

  • Filson - Model XL - Automatic Cattle Head Gate

    The XL Automatic Head Gate is designed for larger breeds of cattle.  Constructed of heavier materials, it has the same features and ease of operation found in the automatic Head Gate. Gate is shown with optional Nose Bar.

    By Filson Livestock Equipment Distributor in Ericson, NEBRASKA (USA). from Head Gates Product line

  • Galvanized - Model GFB10 - 10` Galvanized Feed Bunks

    Strong, yet portable. Heavy duty galvanized steel construction. One-piece molded poly trough. Smooth, rounded corners. Square ends that allow bunks to be bolted together. Optional galvanized hay rack available. Designed for cattle. GFB10, GFB5 are designed for cattle, while GUB5 is lower and ideal for smaller animals. HFB10, HFB5, designed for ...

    By Behlen Manufacturing Co. based in Columbus, NEBRASKA (USA). from Feeders Product line

  • Filson - Model XLT - Manual Cattle Head Gate

    This stanchion type head gate can be mounted on the XL Chute or the Standard Chute - in place of the Automatic Head Gate. The locking device on this head gate is a ratchet-type. Nose chain is standard. This head gate is ideal for horned cattle.

    By Filson Livestock Equipment Distributor in Ericson, NEBRASKA (USA). from Head Gates Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you