Only show results available in Connecticut? Ok

cattle feeder equipment

  • Farmco - Model 200 Series - Cattle Feeders

    The 200 Series cattle feeders are a cost effective alternative to the four-wheeled 400 Series feeder wagons if a more stationary placement is acceptable. Like the 400 Series the 200 Series feeders are designed to efficiently feed TMR or chopped green feeds. This feeder is built with efficiency of feeding and safety for the animal in mind. With a ...

    By Farmco Manufacturing based in Ronks, PENNSYLVANIA (USA). from Cattle Feeders Product line

  • Farmco - Model L Series - Cattle Feeders

    The L Series bunk feeders have a 16” deep by 47” wide trough and is available with or without slant bars. This series of cattle feeders also includes four drain holes to eliminate water in the trough in addition to a heavy duty 12-gauge steel pan. Both of these features help provide these feeders with a long, solid life.

    By Farmco Manufacturing based in Ronks, PENNSYLVANIA (USA). from Cattle Feeders Product line

  • Farmco - Model 700 LRB Series - Cattle Feeders

    The 700 Series are double wide models designed for all sizes of round and square bales, chopped green feeds, and TMR. Wheeled models have great stability and weight handling capacity. The 180° turning front dolly makes them easy to maneuver. All sizes are available with wheels or stationary legs. The fold-up, extendable tongue lifts out of the ...

    By Farmco Manufacturing based in Ronks, PENNSYLVANIA (USA). from Cattle Feeders Product line

  • Farmco - Model FL Series - Cattle Feeders

    FL Series bunk feeders are designed to position just inside a fence so you can dump feed in from the outside. No more climbing on and off your loader to open and close gates! They also work great for receiving feed directly from your TMR mixer. The FL Series feeders are constructed to the same specifications as the L Series.

    By Farmco Manufacturing based in Ronks, PENNSYLVANIA (USA). from Cattle Feeders Product line

  • Farmco - Model 700 DRB Series - Cattle Feeders

    The double wide 700 series DRB models are designed for both round and square bales or chopped green feeds and TMR. The rear entry gate allows easy access into the trough for cleaning or loading round bales from the rear. The inverted 'V' divider, along with Farmco's slanted trough sides avoid accumulation in the bottom of the trough which provides ...

    By Farmco Manufacturing based in Ronks, PENNSYLVANIA (USA). from Cattle Feeders Product line

  • Farmco - Model 400 Series - Cattle Feeders

    Standards in the industry, the 400 series are a convenient 4' wide. These top loading feeders are easily transported into the field, efficiently feeding TMR or chopped green feeds. All Farmco feeders have slanted trough sides to reduce accumulation in the bottom of the trough and feature 1' square tubing uprights for improved feed management. All ...

    By Farmco Manufacturing based in Ronks, PENNSYLVANIA (USA). from Cattle Feeders Product line

  • Cattle Feeder Tags

    Temple Feeder & Super Feeder Tags are designed for short term use, less than 12 months, and work seamlessly with our portable Temple Hot Stamp Machines.

    By Z Tags based in Temple, TEXAS (USA). from Cattle Feeder Tags Product line

  • Mid Valley - Custom Dairy Cattle Feeders

    Mid Valley Manufacturing has spent over 30 years perfecting the design of our cattle feeders. We understand that maintaining proper nutrition and water intake is crucial for your dairy herd’s milk production and the profitability of your dairy business. Designed specifically for dairy cows, our dairy cattle feeders help to eliminate several ...

    By Mid Valley Manufacturing Inc. based in Abbotsford, BRITISH COLUMBIA (CANADA). from Custom Dairy Cattle Feeders Product line

  • Cattle Lick Feeder

    2 Tonne (24 Bag) and Fully Galvinised. 2 Tonne (24 Bag). Fully Galvinised.

    By Kerin Engineerning based in Obley , AUSTRALIA.

  • EZE - Model 70 Bushel or 93 Cu. Ft. - Cattle & Sheep Feeder

    Designed for bunk or pasture feeding of rolled grain / pellets. Round design eliminates corners that may cause bridging. 6' hopper diameter. 40 degree bottom cone. 12 volt system c/w 1.3hp motor, 16' hookup cables, remote control switch. Hydraulic orbit motor option comes w/o hoses. Epoxy-coated interior. Exterior finished with 2 part epoxy primer ...

    By Reimer Welding Mfg Inc. based in Cartwright, MANITOBA (CANADA). from Cattle & Sheep Feeder Product line

  • AgrosysEurope - Model AS0010390 - Feeder

    Ideal product for cattle. The products come in different shapes and dimensions. Check out particular products, technical specification and our competitive prices.

    By AgrosysEurope based in Dalby, DENMARK. from Feeder Product line

  • Model 800-14 - Commercial Feeders

    Designed with commercial cattle feeders in mind, this rugged unit uses two 30' diameter low speed augers in the bottom, bringing the feed forward without a boiling action to two cross augers. The cross augers then move the feed to the discharge conveyor for fast, efficient and even feed delivery. With ROTO-MIX, there are no high wear, high ...

    By Roto-Mix based in Dodge City, KANSAS (USA). from Commercial Feeders Product line

  • Prefabricated Feeders

    We produce 2 types of prefabricated cattle feeder: flat or closed. These are cementcattle feeders of variable length, supplied with iron plates for anchoring the feeding stalls and/or iron roofs. Their use allows feeding passages to be created quickly with a smooth surface and a formwork base.  It is possible, on request, to apply a non-toxic ...

    By Fattori Srl based in MONTICHIARI, ITALY. from Prefabricated Feeders Product line

  • Model S.I. - Feeder

    These S.I. Feeders reduce stress and provides a better environment for the cattle year around. An Arrow Front feeder will take any type of feed to a clean area where it can be consumed with less waste and reduces the manure buildup. An extra advantage is that an electric powered stationary mixer, which costs less to buy and less to run, can be ...

    By Swihart Sales Company based in Quinter, KANSAS (USA). from Feeder Product line

  • Werk Weld - Model 60 - Bushel Feeder

    Creep/Self Cattle Feeders designed for durability and strength. All creep feeders are easily set up without any tools. Top lid opens from the ground. Extra heavy removable creep panels. Creep panel hold down bars. Two stabilizing jacks. Fold out rain awnings. Easy flow door adjustment system. New tires with tubes. Full length top opening for easy ...

    By Werk Weld Inc. based in Armour, SOUTH DAKOTA (USA). from Bushel Feeder Product line

  • ROTO-MIX - Commercial Series Feeders

    Designed with commercial cattle feeders in mind, this rugged unit uses two 30' diameter low speed augers in the bottom, bringing the feed forward without a boiling action to two cross augers. The cross augers then move the feed to the discharge conveyor for fast, efficient and even feed delivery. With ROTO-MIX, there are no high wear, high ...

    By Bruna Implement Company based in Clay Center, KANSAS (USA).

  • Easy Way - Cattle Saver

    The EASY WAY face fly fighter, mineral feeder and cattle scratcher, aids in the control of face and horn flies, mosquitoes, lice and other pests.  Features a heavy pipe stand, large rubber mineral tub, large see-thru supply tanks for easy refilling.  The Cattle Saver also has long lasting nylon curtains, is adjustable for large and small ...

    By Easy Way Cattle Care based in Decorah, IOWA (USA).

  • Werk Weld - Model 160 - Bushel Feeder with Panels

    Creep/Self Cattle Feeders designed for durability and strength. All creep feeders are easily set up without any tools.  Top lid opens from the ground. Front observation step. Extra heavy removable creep panels. Creep panel hold down bars. Four stabilizing jacks. Fold out rain awnings. Easy flow door adjustment system. New 16' 10ply tires. ...

    By Werk Weld Inc. based in Armour, SOUTH DAKOTA (USA). from Bushel Feeder with Panels Product line

  • Easy Way - Mineral Feeder

    The EASY WAY Mineral Feeder and Face Fly Fighter not only keeps the salt and minerals dry, it also helps control: Flies, Lice, Ticks and Mosquitoes. These feeders also help reduce the spread of pinkeye and other cattle diseases.

    By Easy Way Cattle Care based in Decorah, IOWA (USA).

  • Werk Weld - Model 35 - Bushel Single Sided Feeder

    Creep/Self Cattle Feeders designed for durability and strength.  All creep feeders are easily set up without any tools. Top lid opens from the ground. Extra heavy removable creep panels.  Creep panel hold down bars. Easy flow door adjustment system. Full length top opening for easy filling. Lid can be opened with creep panels up or down. ...

    By Werk Weld Inc. based in Armour, SOUTH DAKOTA (USA). from Bushel Single Sided Feeder Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you