Refine by
Central Tower Equipment & Supplies
10 equipment items found
Manufactured by:Irrifrance Groupe based inPaulhan, FRANCE
The central structure of the Irrifrance pivot is resistant to any ordeals. Cemented in place, it perfectly absorbs the stresses caused by the site's landform and the rotational motion of the ...
Manufactured by:Torresol Energy based inGetxo (Biscay), SPAIN
Torresol Energy is a pioneer in applying technological solutions for plants with central towers and heliostats, such as the high-concentration receiver and the high-temperature storage of molten ...
Manufactured by:Tecno Pivot - RKD Irrigación S.L. based inCistérniga, SPAIN
The central tower of the circular pivots is manufactured with elbow and extension pipe of large thickness, in a guide pipe where the four anchorage feet are welded. Likewise it possesses a connection for the exit of the electrical collector rings fixing pipe, entirely hermetic by the means of cable ...
Manufactured by:Dynamo Furnaces, A division of Axiom Machinery Inc. based inCambridge, ONTARIO (CANADA)
Dynamo's GM-H Series central tower melting furnaces boast high thermal efficiency due to their substantial insulation, resulting in cost-effective operation, reduced gas consumption per ton of aluminum, and enhanced safety. These furnaces are equipped with dual air blowers and VFD drive blower motors that optimize the air supply, ensuring greater efficiency and ...
Manufactured by:Marani Irrigazione Srl based inModena, ITALY
Self-propelled boom and a fixed central or swivel tower, for agricultural irrigation of large and medium-sized ...
by:Riegos Ruiz based inAlfaro, SPAIN
The Hypodromous Systems are designed to irrigate square, rectangular or trapezoidal plots, allowing the rotation by pivoting at one or several points, watering in turn when necessary, without the need to anchor the central carriage. The structure of a pivot is mounted on the 4-wheel carriage, supplying water with a hose to the riser and elbow, both in galvanized steel of 219 mm in diameter. It ...
by:Riegos Ruiz based inAlfaro, SPAIN
The pyramidal structure formed by angular profiles of galvanized steel and the anchoring by bolts to the square platform of reinforced concrete give the central pivot a great robustness to be able to withstand the rotating movements of the machine. The pivot is supplied with water through a riser and an elbow, both in galvanized steel 8 5/8 "(219 mm) in diameter. It has a 13-way collector, ...
by:Riegos Ruiz based inAlfaro, SPAIN
Designed to irrigate in 2, 3, 4 or more places without requiring a tractor to change position. The central rotating car has two driving wheels, which are used for circular operation or for its transfer, and this is done by turning said wheels 90 ° once the car is lifted with the hydraulic group installed in ...
by:Riegos Ruiz based inAlfaro, SPAIN
Standard front systems are suitable for watering rectangular or square surfaces, due to their linear movement. The car is mounted on 2 or 4 driving wheels and is fed by a hose that connects to one or more hydrants, depending on the size of the plot and the flow to be provided. The alignment system is carried out by means of a groove or a cable with probes. ...
by:Riegos Ruiz based inAlfaro, SPAIN
The Side System with Channel Feed is fed directly from a level channel. A motor pump group is installed on the 4-wheel car that sucks and drives the required flow. There are two versions: electric or diesel. In the first case, a surface electric cable is required that provides us with the energy necessary for its operation; and in the case of diesel, a generator set would be required to supply ...