Refine by
Chisel Plough Equipment & Supplies
71 equipment items found
Manufactured by:Rime Agri based inIzmir, TURKEY
The high volume of the field traffic in farm machinery, causes soil compaction, hard soil or hardpan, and productivity losses. One of the most important tillage machines in the Rime Agri range is Pro Chisel which is cracking the soil via shanks to increase productivity effectively. Rime Agri Pro Chisel can be successfully used in ...
Manufactured by:Gessner Industries based inToowoomba, AUSTRALIA
Gessner offers both HR1200 Hydraulic Release Tyne and Rigid Tyne Chisel Ploughs, ensuring that all of your broadacre ground preparation requirements are catered for. The combination of heavy-duty frame and quality, field-proven units provides unmatched durability and longevity in tough tillage ...
Manufactured by:Agromaster - a Registered Brand of Atespar Ltd. based inBüyükkayacik OSB, Selçuklu, TURKEY
Therefore transportation to the field can be easily done.Hard ground is composed under 25-40 cm depth below the field that plowed with standard ploughs. Chisel plough breaks the hard bottom of soil under 25-40 cm with long and angled tines. So that rain and irrigation water can reach easily to broken area and provided the water storage. Above the ...
Manufactured by:AGRI FARM Machinery GesmbH based inMichelndorf, AUSTRIA
Permanent vibration of the wide, powerful leaf spring tines ensures a much better crumbling and mixing of the soil. Particularly on hard, dried-out soils, the cultivator leaves a finely crushed and evenly mixed surface. The cultivator penetrates even the hardest arable soils thanks to elastic, vibrating movements. The permanent movement of the tines guarantees that the complete field is broken up ...
Manufactured by:Zormpas S.A. based inThessaloniki, GREECE
CARRIED CHISEL PLOUGH “ZORMPAS” For the plowing of soil, equipped with solid arms bearing small pointed coulters. For splitting, fracturing, mixing and loosening of soil, it is also strains the soil and stores water underground. Protection against arms breakage is achieved through an ejectable screw. ...
Manufactured by:Bednar FMT s.r.o. based inPrague 9, CZECH REPUBLIC
The TERRALAND TN mounted chisel plough is a machine for deep soil cultivation up to a depth of 65 centimetres. What makes this machine a success is the fact that it can replace tillage, and when compared with a plough, it works deeper, faster and with lower demands on the tractor power. The TERRALAND TN chisel ...
Manufactured by:Hibema based inP.I.El Montalvo II, SPAIN
Chassis structural tube. Disc holder hubs with taper bearing . Control wheel depth metal adjustable working depth adjustment. Scrapers on disks. Regulation of attack ...
Manufactured by:Yigitsan Agricultural Machinery based inNEVŞEHİR, TURKEY
Rolling Chisel Plough: Can be used from 65 to 85 hp at ...
Manufactured by:Wilcox Agri-Products based inWalnut Grove, CALIFORNIA (USA)
The Wilcox Finishing Chisel picks up where spring loaded chisel plows leave off. While the finishing chisel shanks are sheer protected, the breakout is typically 2-3 times that of spring-loaded shanks. Many western soils will trip or force spring shanks to pivot upward before the chisel has achieved the desired depth. ...
Manufactured by:Vigerm, S.L. based inSanta Coloma de Queralt, SPAIN
27cm distance between arms. Ø 380mm roller with bushings and made of Ø 25mm rea. Drag harrow with 10mm spikes. Shooting height - 480mm. It allows for working at different pressures depending on the hardness of the ground (hydro-pneumatic model). The highlight is its great shooting capacity that can reach a maximum height of ...
Manufactured by:Fortis Tarim based inYunusemre, TURKEY
Spring chisel; It is used to break the hardened base in the soil. It increases the productivity by doing protective tillage because it swells the soil without overturning. Thanks to the independent spring foot mechanisms, the foot that is exposed to the effect by coinciding with hard and stony places is disabled. Then, thanks to this automatic mechanism, the foot, which is freed from the effect, ...
Manufactured by:Ndume Limited based inGilgil, KENYA
Chisel-ploughing the Ndume way means: More Acres cultivated with less fuel. Leaves your moisture from the previous season underground - where it should be. Incorporates crop residue into the topsoil where it should be. Eliminates all pans caused by conventional ploughing. ...
Manufactured by:John Berends Implements Pty Ltd based inDandenong, AUSTRALIA
The ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard. ...
Manufactured by:Vigerm, S.L. based inSanta Coloma de Queralt, SPAIN
27cm distance between arms. Ø 380mm roller with bushings and made of Ø 25mm rea. Drag harrow with 10mm spikes. Shooting height - 480mm. It allows for working at different pressures depending on the hardness of the ground (hydro-pneumatic model). The highlight is its great shooting capacity that can reach a maximum height of ...
Manufactured by:Hibema based inP.I.El Montalvo II, SPAIN
Single-furrows with chisel plows, easy maintenance and high clearance. Protected by fuse for screw hithc. Multiple regulations, cylindrical roof tiles. With height between tips from 90 to 160 cm. A work from 7 "to 18". The twirl is a double-acting ...
Manufactured by:S & M Agricole based inBernolsheim, FRANCE
It increases the productivity by doing protective tillage because it swells the soil without overturning. Thanks to the independent spring foot mechanisms, the foot that is exposed to the effect by coinciding with hard and stony places is disabled. Then, thanks to this automatic mechanism, the foot, which is freed from the effect, continues to work. In this way, damage to the blade and foot ...
Manufactured by:Ozbil Agricultural Machinery based inÖdemis, TURKEY
The machine is connected to a tractor through a three-point hitch mechanism. If a rolling harrow combination (roller) is wanted to use, it is removed from its pin and adjusted. Number of tines can be reduced and the distance between tines can be changed depending on the structure of soil, humidity and operation depth. Soil processing is started after adjusting the desire to depth from the ...
Manufactured by:Turan Agricultural Machines Industry and Trade Inc. based inEskisehir, TURKEY
Our products are manufactured with 3-5-7-9-11 and 13 socketed with fully automatic body profi le. Because of the special spring shock absorber releasing mechanism in every sock it easily can free its self from any obstacle without any intervention and the sock can replace its self. This is fuel and time effi cient. Because it cuts through the soil deeply it also works as ...
Manufactured by:John Berends Implements Pty Ltd based inDandenong, AUSTRALIA
These primary cultivators are designed for ploughing clean soils where penetration and draft is not a ...
Manufactured by:Turan Agricultural Machines Industry and Trade Inc. based inEskisehir, TURKEY
Our products are manufactured with 3-5-7-9-11 and 13 socketed with bolt pin cutter body profi le. Our plough opens up the soil without turning it over and breaks up the water tight deep soil. Because it cuts through the soil deeply it also works as subsoil. To use the maximum potential of the tractor it has be set to the perfect ...