Chisel Plough Equipment Available In Latin America
-
Manufactured by Fortis Tarimbased in TURKEY
Spring chisel; It is used to break the hardened base in the soil. It increases the productivity by doing protective tillage because it swells the soil without overturning. Thanks to the independent spring foot mechanisms, the foot that is exposed to the effect by coinciding with hard and stony places is disabled. Then, thanks to this ...
-
Manufactured by Yigitsan Agricultural Machinerybased in TURKEY
Rolling Chisel Plough: Can be used from 65 to 85 hp at ...
-
Manufactured by WILCOX Agri-Productsbased in USA
The Wilcox Finishing Chisel picks up where spring loaded chisel plows leave off. While the finishing chisel shanks are sheer protected, the breakout is typically 2-3 times that of spring-loaded shanks. Many western soils will trip or force spring shanks to pivot upward before the chisel has achieved the desired depth. The rigid ...
-
Manufactured by Zormpas S.A.based in GREECE
CARRIED CHISEL PLOUGH “ZORMPAS” For the plowing of soil, equipped with solid arms bearing small pointed coulters. For splitting, fracturing, mixing and loosening of soil, it is also strains the soil and stores water underground. Protection against arms breakage is achieved through an ejectable screw. There is possibility of ...
-
Manufactured by S & M Agricolebased in FRANCE
It increases the productivity by doing protective tillage because it swells the soil without overturning. Thanks to the independent spring foot mechanisms, the foot that is exposed to the effect by coinciding with hard and stony places is disabled. Then, thanks to this automatic mechanism, the foot, which is freed from the effect, continues to work. In this way, damage to the blade and foot ...
-
Manufactured by OZBIL AGRICULTURAL MACHINERYbased in TURKEY
The machine is connected to a tractor through a three-point hitch mechanism. If a rolling harrow combination (roller) is wanted to use, it is removed from its pin and adjusted. Number of tines can be reduced and the distance between tines can be changed depending on the structure of soil, humidity and operation depth. Soil processing is started after adjusting the desire to depth from the ...
-
Manufactured by Soilmaster Agricultural Machinerybased in TURKEY
Dominant series trailed type multi disc harrow & chisel plough with t type roller combination. Its open design with large clearances effectively prevents blockage even when working with high contents of organic matter.The serrated concave discs (560,610 mm diameter), which are supported by maintenance-free angular ball bearings, form the ...
-
Manufactured by Captain Tractors Pvt. Ltd.based in INDIA
Chisel Plough is geared to offer superior performance for a long time. With sharply honed chisels that tackle the hardest soil easily, our Chisel Ploughs have become a much sought after Agricultural Equipment among the Indian farmers. ...
-
Manufactured by Punjab Agro Sales (India)based in INDIA
Features: It’s designing is for tough work and operates as a Chisel Plough. The tiller has heavy duty Tynes for positive penetration. It breaks up hard top soil, uproots stubbles and leaves the ground perfectly worked. It is particularity useful for paddy cultivation areas requiring shallow ploughing on hard clayey cracked up ...
-
Manufactured by Nichols Tillage Tools, Inc.based in USA
The Nichols heel sweep is a revolutionary design that allows both sweeping and chiseling to be done simultaneously. This combination results in breaking up the hardpan to encourage better root penetration and absorbtion of moisture. Manufactured from 1/4" hardened steel, Heel Sweeps are available in 16" and 18" widths and will accept any ...
-
Manufactured by John Deerebased in USA
The John Deere 2410 Chisel Plow has been field-proven to provide consistent residue management for years. And it’s as reliable as it is productive. The robust frame of the 2410 delivers added strength for more aggressive performance. Heavy-duty 4x4-inch box-beam-steel cross members give the 2410 plenty of ...
-
Manufactured by Nichols Tillage Tools, Inc.based in USA
Double-end chisel for chisel plows; 5/8" x 2" x 17"; 1/2" holes on 2-1/4" ...
-
Manufactured by Bourgault Tillage Tools Ltd.based in CANADA
This holder has 2-1/4″ (57 mm) bolt hole spacing. The bolt hole section is flat and has two sets of holes. The top set of holes should be used in almost all cases when mounting this holder to the shank. It fits on the Bourgault chisel plow shanks as well as the LH755 shank used on the Morris Magnum III and the Morris Concept ...
-
Manufactured by Hard Metals Australiabased in AUSTRALIA
16508 8" - 8mm Thick HB Stubble master 3W. Face and point ...
-
Manufactured by Orthman Manufacturing Incbased in USA
The Stubble Treader’s rugged, large diameter, 7-tooth, hard-surfaced treaders rip out weeds, and aerate soil, while our exclusive angle and pressure adjustment allows you to quickly set them to match your field conditions. Orthman’s universal mounting design allows the Stubble Treader to be integrated with virtually any chisel or ...
-
Manufactured by Nichols Tillage Tools, Inc.based in USA
is to continue that tradition for years to come. Chisel Plow Sweeps are available in Bolt-On and Quick Change ...
-
Manufactured by Fortis Tarimbased in TURKEY
It is a secondary tillage tool combination produced optionally up to 25-35 feet without folding and up to 35-60 feet with folding. It makes the soil ready for planting or planting after the soil is processed with known tillage tools such as plow chisel. The feet are made of special silicon manganese alloy heat-treated improvement steel. ...
-
Manufactured by Wil-Richbased in USA
The 2500 Series Chisel Plow from Wil-Rich integrates a deeper frame front to rear in a refined design, compared to its predecessor. The deep frame utilizes four ranks to improve the flow of heavy residue from today’s higher yielding crops. The 2500 Series not only utilizes a deep frame, but also, 3/8″ (9 mm) thick steel for even ...
-
Manufactured by Wil-Richbased in USA
The Award-Winning Wil-Rich 657 DCR (Disc, Chisel) is the outstanding performer for today's farmer. The 657 was named by Farm Industry News' readers as one of the best, most innovative products of 2006 and was one of the recipients of the 2006 FinOvation award. The 657 DCR is available with a hydraulic depth control cutting gang. The 20 ...
-
Manufactured by Gates Manufacturingbased in USA
The primary use of the Gates Baglifter is to assist in loading bulk chemical bags into frame mounted chemical applicators. Any Implement and Configuration! Gates Manufacturing has equipped Baglifters on a variety of harrows, cultivators, chisel plows, and even high wheel applicators. If we haven’t done it yet, we can work with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you