We couldn't find any cultivator equipment suppliers or service providers located in Bosnia & Herzegovina

Here is a list of equipment results with suppliers serving Bosnia & Herzegovina

Cultivator equipment available in Bosnia & Herzegovina

  • Anadolu - Model AMK - Cultivator

    This type of model can be produced in 7, 9, 11, 13 and 15 legs. It is used for tearing up the soil, emboss and aerate it, breaking up soil clods, cutting alien meadows and pull up its roots to surface, mixing the seeds and mineral manures which was thrown to soil surface, and hoeing the rows of plants when the required settlements are made. It can ...

    By Köylü Agriculture Machines Industry Co. based in Konya, TURKEY. from Cultivators Product line

  • Model GA - Combined Cultivator

    Combined cultivator for vineyards and orchards (stainless steel hopper). Specify the kind of transmission required: wheel transmission for fertilizer spreading, or electric engine transmission for fertilizer spreading.

    By Faza Srl based in Città Di Castello (PG), ITALY. from Cultivator Product line

  • Model II - Subdisc Cultivators

    Designed, developed and manufactured by ourselves at our Evesham base. This one pass cultivator has two rows of low draft legs with cast steel knock on points, which break through the pan, lifting and aerating the soil without bringing subsoil to the surface with a working depth of 10-40 cm. The large scalloped discs have sealed for life bearings ...

    By E F Weaving Ltd based in Worcestershire, UNITED KINGDOM. from Cultivators Product line

  • Agroremproject - Model KPS - 4,2 - Cultivators for Open Field Cultivation

    This cultivator is designed for an open field pre-sowing cultivation of a ploughed soil and for deep loosening after tillage. Cultivators can be fitted to tine harrows or rotary /passive hoes in order to make a pre-sowing leveling of the soil.

    By Agroremproject -98 JSCo based in Rousse, BULGARIA. from Cultivators Product line

  • Model ACY Series - Stubble Cultivator

    Stubble Cultivator is working at 15-25 cm work depth depening to the requirement of the soil.After the harvest the plants are left at the field which is enriched the ecological life of th soil however they should be removed for the next seeding operation. With “Wing Share Blades” it rips the soil (instead of turning it like plough) and ...

    By Azim Ziraat Aletleri based in Ortaklar, TURKEY. from Cultivation Product line

  • 3130 High Clearance

    Designed with market understanding and field tested know-how, the 3130 is versatile, featuring a higher clearance tool bar and a variety of gang configurations designed for use in corn, cotton, vegetables or sugar beets. It has a close-coupled gang design putting the working tools forward under the tool bar for maximum control. And the single ...

    By Alloway Standard Industries based in Fargo, NORTH DAKOTA (USA). from Cultivators Product line

  • Chisel Ploughs

    Standard equipment: 27cm distance between arms. Ø 380mm roller with bushings and made of Ø 25mm rea. Drag harrow with 10mm spikes. Shooting height - 480mm. It allows for working at different pressures depending on the hardness of the ground (hydro-pneumatic model). The highlight is its great shooting capacity that can reach a maximum ...

    By VIGERM, S.L. based in Santa Coloma de Queralt, SPAIN. from Cultivators Product line

  • Minichisel - Cultivator

    Ovlac´s Minichisel is an unique stubble cultivator  available in 2 and 3 row configurations, trailed or mounted, with working widths from 2.5m up to 10m. Its 35×35 mm tines (30×30 also available as option)  allow to work between 3 and 25cm deep in the most demanding conditions. Indeed, the stone protection system based ...

    By Ovlac S.A based in Venta de Baños, SPAIN. from Cultivators Product line

  • Clamps for Double Coil Tines

    From 50 up to 100 mm frame. Characteristics: There is the possibility to develop new models according to customers’ requirements.

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Cultivator Product line

  • JYMPA - Chisel Cultivator

    The CHISEL CULTIVATOR is a machine specially designed for the preparation of the soil. It comes with two or three rows of tines which allow working in fields with abundant stubble. All models are ready to adapt a roller with screw augers.

    By JYMPA GROUP based in Castellserà Lleida, SPAIN. from Cultivators Product line

  • Cultivator Points

    Integral heat treatment, guarantee of long life. Characteristics: Boron steel. Hardness: 50 ± 2 HRc. Integral hardening to avoid deformations and rupture. Product uniformity guaranted by strict controls on quality and the production process.

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Cultivator Product line

  • Bellota - Vibro Tines

    Uniformity guarateed by the pre-tension. Characteristics: Special, high elasticity steel with high capacity to recover initial geometry. Specific integral heat treatment that provides each material with optimum characteristics. Pre-tensioned: Eliminate the first deformations to maintain the shape and be able to provide a consistent job. Epoxy ...

    By Bellota Agrisolutions based in Legazpi, SPAIN. from Cultivator Product line

  • HORPISO - Model M.A.P. - Cultivator

    The cultivator between the lines is the machine that allows the cultivation of land planted without damaging the plantation. oxygenates the soil removed and to facilitate and accelerate the development of the plant. Is well suited to a variety of crops (beet, corn, garlic, sunflower, cotton, snuff ...)

    By HORPISO Maquinaria Agrícola based in PEÑAFIEL (Valladolid), SPAIN. from Cultivators Product line

  • Linea - Model 11 TM/B-S - Self-Propelled Cultivator

    Connection to the self-propelled machine Coupling to the self-propelled machine: trailed. Power required by the tractor: 51 kW - 59 kW. Processing implements Number of arch-holding reels: 11 n. Dimensions and weights Operating width: 2.75 m, Working depth: 0.18 m, Weight: 340 kg.

    By Gruppo Nardi based in Selci Lama di S. Giustino (PG), ITALY. from Cultivators Product line

  • Model PS 120/200/300 - Fertiliser Pneumatic Sowing Machines

    Our pneumatic sowing machines are now available in a special version, which is suited for the distribution of fertiliser. Due to the corrosion-resistant fabrication, you can benefit from the advantages and the easy handling of our pneumatic sowing devices during the distribution of fertiliser.

    By APV Technische Produkte GmbH based in Hötzelsdorf, AUSTRIA. from Cultivation Product line

  • Model PS 1000 M1 - Pneumatic Seeder

    As an expansion of the PS series, APV has now developed pneumatic seed drills with large hopper volumes of 1000 l, 1300 l and 1600 l that are especially well-suited for applications with large output volumes. The hopper is self-supporting and the extra large lid (180x80 cm), which can be hinged transversely or longitudinally, enables easy and ...

    By APV Technische Produkte GmbH based in Hötzelsdorf, AUSTRIA. from Cultivation Product line

  • Forest - Model 65 - Multi Purpose Cultivator

    The most versatile cultivator. Frame clearance of 65 or 75 cm. For tractors from 70 till 160 HP.  Types with 2 or 3 rows of tines.  4 Types of tines possible (thickness 25mm).  Tines complete made out of Hardox-steel.  Available with chiselpoints of 6, 15 and 25 cm.  Multi ...

    By Evers Agro B.V. based in Almelo, NETHERLANDS. from Cultivators Product line

  • Mounted Vibro Tillers Cultivators

    The Mounted Vibro Tillers GHEARRDI are easy and functional as well as available on a large range : with fixed frame , or folding lateral wings or specified for wine yards having adjustable working width .

    By Gherardi srl based in Monte Roberto, ITALY. from Cultivators Product line

  • Model RFF - Front Cultivator

    This cultivator has been specially designed for use in the front of the tractor to allow full-field cultivation and planting/sowing in a single pass. This saves both labour hours and fuel. Options include linkage elements for attachment to the rear of the tractor.

    By Struik Wieringermeer B.V. based in Wieringerwerf, NETHERLANDS. from Cultivator Product line

  • Model CAB - BI Blade Cultivator

    2 steel wheels . Hydraulic opening. Roller for CAB 7. Roller for CAB 9. Roller for CAB 11  only for 7 part. Roller for CAB 13 . Roller for CAB 15

    By Angeloni S.r.L based in Montecarotto, ITALY. from Cultivators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you