Cultivator Equipment In Hungary
-
Manufactured by Ferro-Flexbased in HUNGARY
The basis of this technology is to cultivate in a 5-30 cm deep and 10-20 cm wide trail - thus cutting through the remains of dry matter and fertilizing during the same course. In this manner no further process is needed until planting. Strip CAT is manufactured in the USA and distributed by its French representative Sly Agri as well ...
-
Manufactured by Ferro-Flexbased in HUNGARY
Mounted - wheeled tines in 4 rows with replaceble chisels.Width straw harrow.Width levelling ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The Struik RF is an extremely versatile rotary cultivator for all kinds of tillage in all soil types. The machine is available from 2x75 cm to 8x90 cm. The top cover is made of steel, but it can also be made of ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The VariX series is the successor to the RF series. The VariX is a versatile rotary cultivator that is ideally suited to all types of tillage in all soil types. The VariX rotary cultivator is equipped with a spring-loaded top cover. It is the ideal flat-field cultivator for seedbed preparation for potatoes, ridge forming for carrots, ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The rotor of the VariX 3000-OT overtop cultivator turns against the driving direction. The rotor works the soil upwards and throws it toward the rear of the machine against a spring steel bar rack. Clods and crop residues fall directly into the bottom of the seedbed and are covered by a layer of fine soil. That is the basis for a perfect ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The VariX Twinrotor is a unique rotary cultivator with two rotor shafts, each working at a different depth. The main rotor works the soil to a maximum depth of 25 cm and creates enough loose soil to form beds or ridges. First, a ridge former shapes the ridge and behind it the second rotor works overtop in the upper layer of the ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The VariX-F is a flat-field cultivator that is mainly used as a front cultivator during planting or seeding. Combining these tasks in one pass holds major advantages. For instance, extra driving over the seedbed is not required, which saves fuel, labour and time. The front cultivator ensures an ideal seedbed with a nice fine structure ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The strip-till cultivator works the soil overtop into narrow strips, folding grass pollen into the soil so it ends up at the bottom of the seedbed as fertiliser. The result: a clean seedbed, exactly where you need ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The Row-FiX Space is a versatile inter-row rotary cultivator for all types of ridge cultivation. The driveline runs along the top so there is enough clearance to work in high crop. The Row-FiX Space is ideally suited to tillage (ridging) and mechanical weed control. Due to the modular construction of the gearboxes and cultivator units, the ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The ZF is an inter-row rotary cultivator for all types of ridge cultivation. The driveline runs along the top so there is enough clearance to work in high crop. The ZF is ideally suited to tillage (ridging) and mechanical weed ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The Row-FiX is a versatile inter-row rotary cultivator for all types of ridge cultivation. The driveline runs along the top so there is enough clearance to work in high crop. The Row-FiX is ideal for tillage (ridging) and mechanical weed control. Due to the modular construction of the gearboxes and cultivator units, the machine is available from ...
-
Manufactured by Struik Export B.V.based in NETHERLANDS
The WR ridge former is designed for ridge shaping in light to medium soil types with or without stones. The machine is available in versions from 2x75 cm to 8x90 cm. The ridge former is equipped as standard with wear-resistant vibratory teeth and ridgers mounted on a vibro-spring. The ridgers form the first small ridge, after which the ridging hood forms the final ...
-
Manufactured by Robix Hungary Ltd.based in HUNGARY
The uniaxial garden tractor with its working tools is utilizable for cultivation of garden and, houshold parts. Succesfully applicable for grape and fruit-garden ...
-
Manufactured by Robix Hungary Ltd.based in HUNGARY
Robi-MA 51X basic machine with its attached adapters is a good helper for the cultivation of well keeped grounds. The units with a simple assembling are splenidly useful for the following: F-801 scythe with adapter: for mowing of rough grassland. FS-700 sweeper with adapter: for ground cleaning. TL-802 with snow-scraper plate: for snow ...
-
Manufactured by Garmachbased in POLAND
Weeder (harrow) is designed for cultivation of arable fields – destroying weeds and soil crust in culivation of cereals, potatoes, corn, beet, rape, etc. especially on organic farms. Weeder harrow is also used for harrowing grasslands – raking out sod and leveling molehills what accelerates the ...
-
Manufactured by Doppstadtbased in GERMANY
Whenever the efficient production of high-quality wood chips is required, Doppstadt precision chippers of the DH series are always the first choice. They are used for the cultivation of woods and forest stands and for the utilization of the residual wood, which is transformed into energy-saving quality products. For mobile use, the DOPPSTADT ...
-
Manufactured by Garmachbased in POLAND
, beets forage. In horticulture and forestry, disc cultivators are used for setting up nurseries, e.g. roses, shrubs, spruce trees, pine ...
-
Manufactured by Garmachbased in POLAND
In standard Tine weeder harrow Garmach GW-1.6 tines are 7mm and about 40cm long. This is standard wire diameter for weeding. We can also supply Tine weeder harrow Garmach GW-1.6 with 8, 9 or 10mm ...
-
Manufactured by Garmachbased in POLAND
In standard weeding machine tines are 7mm and about 40cm long. This is standard wire diameter for weeding. We can also supply 8, 9 or 10mm ...
-
Manufactured by CLAAS Groupbased in GERMANY
The PADDY PANTHER 14 from CLAAS will help farmers with the growing labor shortage and costs while simultaneously increasing operational efficiency and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you