Cultivator equipment in North Carolina

  • Cultivator Clamps

    This wedge clamp is made to use with a IHC tool bar. It is made to work with a shank and wedge bolt to secure the shank on to the tool bar.

    By Agri Supply based in Garner, NORTH CAROLINA (USA). from Disc & Tillage Product line

  • ENOKRUNKEN - Disc Cultivator

    Enokrunken is a disc machine designed for surface working of the seedbed (up to 18 cm.). The discs are placed in two rows at opposite directions; the wide spacing’s of 250 mm minimizes any possible ground or crop residues clogging. Every disc has a independent hub with an SKF oil bath sealed bearing, which guarantees maximum strength and the ...

    By Enorossi Office in Rocky Mount, NORTH CAROLINA (USA). from Farm Product line

  • Earthquake - Model MC440 - 4 - Cycle Cultivator

    The Earthquake MC440 4-cycle cultivator is a powerful and lightweight solution to maintaining your garden. Designed with stand-up starting, you can comfortably control stops and starts without bending over. The largest-in-class 40cc Viper 4-Cycle engine requires no mixing of oil and fuel. It also produces less noise, and lower emissions. A ...

    By Earthquake Distributor in Morganton, NORTH CAROLINA (USA). from Cultivators Product line

  • Earthquake - Model MC43 - Cultivator

    With a 43cc Viper engine the Earthquake MC43 cultivator can weed, work-in fertilizer, or aerate soil. Its small size and light weight not only make it easy to transport, but it also enhances maneuverability around plants without damaging them. Use with optional Edger accessory to maintain clean borders and edges, and dethatcher kit for healthy ...

    By Earthquake Distributor in Morganton, NORTH CAROLINA (USA). from Cultivators Product line

  • Earthquake - Model 99cc - Tiller Cultivator

    The Earthquake VERSA front tine tiller is two garden tools in one! As a cultivator, VERSA can weed, mulch and aerate soil. As a tiller, the high-performance 99cc Viper engine and design delivers the right amount of power to turn all kinds of soil. Prepare wide open spaces of land in the Spring, maintain rows in the Summer, and do major cleanup in ...

    By Earthquake Distributor in Morganton, NORTH CAROLINA (USA). from Front Tine Rototillers Product line

  • Toro Company - Model ProCore 648 (09200) - Turf Cultivation

    From the innovative wheels within the coring path, to the large 48 in. (122 cm) aeration swath, there's nothing ordinary about the ProCore 648 aerator. Years of research, customer input, testing and attention to detail went into making the ProCore 648 the most productive and efficient walking aerator on the market.

    By The Toro Company Distributor in Shallotte, NORTH CAROLINA (USA).

  • Model 5000 Series - Field Cultivators

    The 5730 range is the ideal tool and has been designed for secondary cultivations and final seedbed preparation. Soil conditioning at its best to ensure the optimum seedbed for planting. This range is suitable for 225 – 345 hp tractors. Heavyweight construction, unrivalled clearance and excellent flotation are three of the more obvious ...

    By Challenger - part of AGCO Netherlands B.V. Distributor in Beaufort, NORTH CAROLINA (USA). from Seeding & Tillage Product line

  • OPTIMER - Model 403R - Stubble Cultivators with Discs

    Stubble cultivator with independent discs, the OPTIMER+ is an ideal tool for shallow stubble cultivation at high speed. It facilitates forced emergence of weeds and volunteer seeds, decomposition of organic matter and allows maintaining maximum soil humidity. Its versatility also enables performing secondary tillage in order to obtain a good ...

    By KUHN S.A. Distributor in Fayetteville, NORTH CAROLINA (USA). from Tillage- Stubble Cultivators Product line

  • Kuhn - Model SO 270 - Sub Soilers

    The heavy weight of the 125 square beam improves soil engagement and ensures regular working depth – The point to point distance can be adjusted to adapt to the working conditions. In the two body version, this adjustment enables loosening the soil of the tractor wheel tracks – Easy and economical maintenance thanks to the removable ...

    By KUHN S.A. Distributor in Fayetteville, NORTH CAROLINA (USA). from Kuhn Tillage- Deep Working Cultivators Product line

  • DOMINATOR - Model DMR 4850-12 - Primary Tillage System

    The DOMINATOR Primary Tillage System is changing fall tillage. This exciting new concept eliminates stalk shredding and extra seed bed preparation trips. By managing residue in the fall and leaving a more level fall seed bed condition, the DOMINATOR sets the stage for fast efficient spring seedbed trips and maximum yields.

    By KUHN S.A. Distributor in Fayetteville, NORTH CAROLINA (USA). from Kuhn Tillage- Deep Working Cultivators Product line

  • Kuhn - Model DC 301 - Soil Looseners

    Soil loosener can be combined for work with power harrows or power tillers or solo with a roller - chassis of triangular design for an excellent weight/robustness ratio - Central working depth adjustment - rear offset of only 45 cm - symmetrical shares with special angles to evenly break up soil and lift up over the whole working width - Shearbolt ...

    By KUHN S.A. Distributor in Fayetteville, NORTH CAROLINA (USA). from Kuhn Tillage- Deep Working Cultivators Product line

  • Landoll - Model 2000 Series - Row Crop Cultivator

    The Landoll 2000 Series Row Crop Cultivator is designed as a high speed, heavy residue cultivator used primarily as a weed control/soil aeration tool.  The 2000 Series fits into a multitude of row crop cultivation operations including ridge-till (with proper options), minimum till and no-till.  The 2000 Series is engineered with a close ...

    By Landoll Corporation Distributor in Kinston, NORTH CAROLINA (USA). from Farm Equipment - Landoll Farm Equipment Product line

  • Salford - Model 450 - S-Tine and C-Shank Cultivators

    Are standard features on Salford field cultivators.  Hydraulic self leveling frames, and fine adjust single point depth control are standard features.  Capped, all tubular steel frames add to the strength of the machine, and 4'x6' main beams, and 2.5' x 2.5' tine bars stand up to the toughest operating conditsion. Fewer hinge points ...

    By Salford Group, Inc. Distributor in Horace, NORTH CAROLINA (USA). from Secondary Tillage Product line

  • Dixon - Model D24KH54 - Tractors

    The D24KH54 features an optional sleeve hitch to make this versatile tractor a perfect addition to a busy home where the yard needs more attention than just mowing! The powerful 24 HP Kawasaki engine and large rear wheels allow this workhorse to pull ground engaging attachments such as a cultivator or a grader. A deluxe front brush guard, electric ...

    By Dixon based in Charlotte, NORTH CAROLINA (USA). from Tractors Product line

  • Model 16 inch - Disc Hillers

    Use the 16 in. disc hiller with a 16 inch shank to create raised garden beds or cover your crops. The Blanton style hub has 4 bolts and contains bearings to resist on wear and tear. Attached to your tool bar or to a Keulavator, ASC # 51946, use two of these disc bedders to move your soil efficiently in one pass.

    By Agri Supply based in Garner, NORTH CAROLINA (USA). from Disc & Tillage Product line

  • Poulan Pro - Model HDF900 - Tillers

    Poulan PRO tillers are the perfect tools for optimal soil preparation. The HDF900 features front rotating tines which are best suited for prepping plant beds, weeding and composting in small to medium-sized areas.

    By Poulan Pro based in Charlotte, NORTH CAROLINA (USA). from Tillers Product line

  • Jonsered - Model GC 2128 - Lightweight Trimmers Machines

    Grass trimmer of Combi type. The detachable tube makes it possible to attach many different types of attachments such as pole saw, cultivator, edger, sweeper, hedge trimmer. GC2128C is equipped with Spin Start for easy start. Delivered together with single strap harness and T25 trimmer head.

    By Jonsered Distributor in Winston-Salem, NORTH CAROLINA (USA). from Trimmers & Brushcutters Product line

  • Bush Hog - Model APP48/60/66/85 - All Purpose Plows

    Bush Hog’s new line of All Purpose Plows help you tackle a wide range of ground breaking tasks. These field cultivators break up, cultivate, and aerate the ground in agricultural fields, food plots, gardens, or anywhere you need to get something growing. Spring loaded, auto-reset shanks allow you to go where other tools cannot… ...

    By Bush Hog - a member of the Alamo Group Distributor in NORTH CAROLINA (USA). from Tillage- Plows Product line

  • Land Pride - Model APS15 Series - All Purpose Seeders

    The APS15 Series All Purpose Seeders are excellent combination planting and cultivation tools for golf courses, school systems, municipalities, rental yards, construction companies, sports fields, and college campuses. Their narrower widths make them effective in seeding applications on residential lots, grassy medians, or rights-of-way adjacent ...

    By Land Pride - Great Plains Manufacturing Distributor in Monroe, NORTH CAROLINA (USA). from Seeders- Spreaders Product line

  • Yanmar - Model SA424 - Open Platform Tractor with Rops

    Some of the most beautiful land features rolling hills, tough soils and challenging terrain. If you work that type of land, the 424 is the right tractor for you. With a larger tire package, the 424 provides greater ground clearance and plenty of ground-gripping traction to put your tractor horsepower to work.  With the SA424, you can ...

    By Yanmar America Corporation Distributor in Kinston, NORTH CAROLINA (USA). from SA Series- Tractor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you