Refine by
Cultivator For Front Mounting Equipment & Supplies
73 equipment items found
Manufactured by:Dewulf NV based inRoeselare, BELGIUM
The SC series of cultivators for attachment in front of a tractor can be installed quickly on the tractor and fits each model. This cultivator guarantees high, reliable performance and excels in regard to the ease of use. With its 650 mm rotor diameter, the SC series has a larger rotor diameter than most other cultivators in the same category. This makes it possible to till deeper for better ...
Premium
Manufactured by:Bomet Sp. z o.o. Sp. K. based inWegrów, POLAND
Tilling and sowing sets – toothed Hercules are designed for simultaneous cultivation soil and seeds. Machines can be used for pre-sowing tillage after pre-sow or pre-winter ...
Manufactured by:DALBO A/S based inRandbøldal, DENMARK
Heavy duty mounted stubble cultivator with 480 mm wide wing shares providing full working width and even incorporating of the stubble. The following angled discs cut through the soil and even out the surface and the 500 mm rear roller consolidates and levels the soil. It also provides depth control. Possible working depth 4-20 cm. An under frame height of 80 cm allows a huge trash ...
Manufactured by:GERPRO Ltd based inNova Zagora, BULGARIA
Type: Mounted, merged processing, rear support. Cultivator weight: 1 180 kg. Working width: 4.6m. Working depth: up to 140mm. Recommended tractor power: 80 – 100 h.p. Roller diameter: ...
Manufactured by:F.lli Marinelli s.r.l. based inSigillo (PERUGIA), ITALY
MOUNTED VIBRO CULTIVATOR FIXED OR MOVABLE CHASSIS VERSION. With rollers and wheels. Available in fixed chassis form mt 1,60 to mt 3,00 (from 63″ to 118″) it’s also available in hydraulic folding wings version form mt 3,60 to mt 5,00. From 142 lb to 197 ...
Manufactured by:AMAZONEN-Werke H. Dreyer GmbH & Co. KG based inHasbergen, GERMANY
The 3-stagger Cenius mounted cultivator in working widths of 3 m to 4 m can be operated from shallow stubble tillage down to topsoil deep loosening. Due to the wide-ranging share and roller programme, the implement can be matched to virtually any field ...
Manufactured by:Hillside Cultivator Company, LLC based inLititz, PENNSYLVANIA (USA)
Another option for retrofitting an existing cultivator is the single spider with a round bar mount. These can be easily mounted to a cultivator tractor with round bar clamps and used along the edges of plants. The single spider is mounted on a bearing so it rolls in the ...
Manufactured by:P.P.H. Mandam Sp. z o.o based inGliwice, POLAND
The Campbell MWC/MWW rollers are intended for cultivation. Mounted on the front three-point hitch of the tractor. Their main function is to compact and smooth the field before or during sowing, compress and maintain soil moisture and improve its structure. Mandam Campbell cast wheels are available in three diameters: 700, 800 and 900 mm. ...
Manufactured by:Rinieri S.r.l. based inForlì (FC), ITALY
EL-A hydraulic offset cultivators are new and created to be used with reversibledrive tractor or with front lift. They maintain the same features and efficaciousness of rear mount hydraulic offset cultivator EL, while offering an easier view of the working area. ...
Manufactured by:Covington Planter Company based inAlbany, GEORGIA (US) (USA)
Our 1 Row Planting Unit is sold in a complete package ready to go to the field and includes one of our TP46 planters mounted on a cultivator with five rigid shanks. The planting unit matches the lasting quality of Covington's line of planters, for garden and multi-purpose single row ...
Manufactured by:Bellota Agrisolutions based inLegazpia, SPAIN
From 50 up to 80 mm frame. Characteristics: There is the possibility to develop new models according to customers’ requirements. The clamps for the Bellota vibro cultivator tines can be mounted on cultivators with frames from 40x40 up to frames of 80x80. It should be taken into account that when the tine is assembled with a reinforcement the clamp must be adapted as well. In the table ...
Manufactured by:Hillside Cultivator Company, LLC based inLititz, PENNSYLVANIA (USA)
These mounts can be used to retrofit an existing cultivator with rolling spider or disc gangs. Some older cultivator tractors use clamps that accept a round ...
Manufactured by:Baselier based inSteenbergen, NETHERLANDS
BASELIER Overtop Cultivator buried stones and clods under the seedbed and cultivating of grass-land and other ...
Manufactured by:Bugnot based inRoches-Bettaincourt, FRANCE
The semi-mounted Rigiculteursmodels are all triple beam. The 3 point linkage between the wheels enables a roller to be hitched for depth ...
Manufactured by:Gruppo Nardi based inSelci Lama (PG), ITALY
Structure made by certified quality materials. Many different type of shares. Shares in microalloyed and heat-treated steel. Horizontal springs to increase safety and lifting of ...
Manufactured by:Dewulf NV based inRoeselare, BELGIUM
The SC series of cultivators for attachment behind a tractor can be installed quickly on the tractor and fits each model. This cultivator guarantees high, reliable performance and excels in regard to the ease of use. With its 650 mm rotor diameter, the SC series has a larger rotor diameter than most other cultivators in the same category. This makes it possible to till deeper for better growing ...
Manufactured by:AMAZONEN-Werke H. Dreyer GmbH & Co. KG based inHasbergen, GERMANY
The Cenio 3-stagger mounted cultivator, in working widths from 3 m to 4 m, in a rigid or folding execution, can be used from shallow stubble cultivation through to topsoil deep loosening down to a depth of 30 cm. Due to the wide-ranging share and roller programme, the implement can be matched to virtually any field conditions. ...
Manufactured by:Lowery Manufacturing Company based inBoaz, ALABAMA (USA)
A Planter can be mounted on this Cultivator. Has slots in the frame so tines can be adjusted and locked in different ...
Manufactured by:Carli s.r.l. based inLarciano (Pistoia), ITALY
The lawn mower is suitable to cut grass on vast fields or in gardens, where it is not necessary to collect the cut grass. This equipment can be applied to any kind of reversible walk behind tractor or cultivator. The adaptable mounting flange allows to align in height the mowing deck to the soil level. The front pivoting wheels have a height ...
Manufactured by:Sumo UK Ltd based inYork, UNITED KINGDOM
The Mounted Trio has gained the reputation as the UK’s number 1 one-pass stubble cultivator. As the name suggests, the Trio comprises of three parts, each of these finely tuned to create a seedbed from stubble in one pass, an objective achieved by the vast majority of ...