Only show results available in Virginia? Ok

Dendrometer equipment

  • MMM - Model DL-18 - Conventional Datalogger for Dendrometer

    Suitable for connecting up to 4 Dendrometers. USB interface, an internal battery lasts for more than one year. Memory for up to 1900 000 Measurements (memory for 4 Dendrometers for 1 year of data @ 1-minute logging interval), Resolution 0,2 to 0,5 μm (depending on Dendrometer model). Logging Intervall user defined between 1 sec. and ...

    By MMM Tech Support GmbH & Co. KG based in Berlin, GERMANY. from Dendrometer Product line

  • Model DD-S - Small Diameter Dendrometer

    The DD-S is designed specifically for agricultural plants, small trees and branches. It is suitable for plants with a diameter of less than 5 cm. Due to a patented mounting method, the dendrometer also provides for very small plants stable readings.

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • Model DD-L - Large Diameter Dendrometer

    The sensor is mounted on a patented fastening technology at the plant. The sensor remains stable fixed at the measuring point without exerting too much pressure on the measuring point. The model is suitable for diameter of 3-30 cm.

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • Model DE-1P - Dendrometer

    The DE-1P Dendrometer is a highly precise incremental LVDT-based sensor for monitoring micro-variations of trunk radius in micron range. Plant growth and water balance affect diurnal behavior of trunk radius. The growth rate depends on a vegetation stage and environmental conditions. ...

    By Bio Instruments S.R.L. based in Chisinau, MOLDOVA. from Plant Sensors Product line

  • Model DC1 - Circumference Dendrometer

    The Circumference Dendrometer 1 is the simpler version for the measurement of circumference changes of plants. The sensor is mounted on a wire cable with a very low coefficient of thermal expansion on the plant. The slide rings reduce the friction between the wire cable and the tree bark. They also decrease the pressure of wire cable on the tree.

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • Model DC2 & DC3 - Circumference Dendrometer

    The DC2 and DC3 are the improved version of the DC1. The tension is not applied in a tangential, but in the radial direction. The pressure of the wire cable to the tree is independent of tree size. The data of different tree sizes are comparable. The sensor is mounted on a wire cable with very low thermal expansion coefficient at tree. The slide ...

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • MMM - Model DC-2 - Dendrometer for Circumference

    This model is optimized for for tree diameters of more than 5 cm. Automatic adjustment of the tension, sensitive measurements even with very large trees, pressure of the wire cable to the tree independent of tree size.

    By MMM Tech Support GmbH & Co. KG based in Berlin, GERMANY. from Dendrometer Product line

  • Model DR - Radius Dendrometer

    The sensor is anchored by two special screws in the heartwood. The changes outside of the heartwood correspond to the radial growth. The arrangement ensures high stability for long-term measurements.

    By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

  • Model DR26 - Band Dendrometer

    For the measurement of short and long term changes in stem circumference, The DR26 Band Dendrometer is used to measure short and long term changes in stem circumference. The DR26 measures stems with a diameter greater than 8cm.The DR26 is a highly accurate dendrometer with a measurement resolution of 1μm (0.001mm) stem circumference change. The ...

    By ICT International based in Armidale, AUSTRALIA.

  • Diametric Growth Sensor (Dendrometer)

    Output data: Stem, shoot or fruit diameter. Compatible with: AgriSense/VineSense wireless units. Item Code: PS-0015-LA.

    By Netsens s.r.l. based in Sesto Fiorentino Firenze, ITALY. from Sensors Product line

  • Model DRL 26A - Dendrometer Increment Sensor

    Rotary position sensor. Step-less reading. No upper limit in stem diameter. Built-in datalogger. IR data access. Optional internal temperature logging. Non-invasive fixing. Manufactured by EMS

    By Environmental Measuring Systems (EMS) based in Brno, CZECH REPUBLIC. from Smart Sensors Product line

  • Scatter - Model 100 - Interface Sensor

    Scatter100-Sensorinterface for wireless-signal-transmission from soilmoisture-sensors, dendrometers etc.

    By UP Umweltanalytische Produkte GmbH based in Ibbenbüren, GERMANY. from Data Collection Product line

  • Scatter - Model 100 - Wireless Signal Transmission System

    Scatter100 – the new wireless signal-transmission system. Base station consisting of receiver incl. SD-card. Incl. 12Vdc-connection- and transmission-cable. Comes with 12V/24Ah battery. To collect data from sensor-modules (for soilmoisture, dendrometers, rH/airtemp/CO2, SDI12). Max. range 1000m, Frequency: 868-870MH. Available with ...

    By UP Umweltanalytische Produkte GmbH based in Ibbenbüren, GERMANY. from Data Collection Product line

  • Model RC3H BT - Basal Area Counter Calculator – Clinometer

    RC3H is ALL-IN-ONE tool for basal area inventory work. It can be used also as an individual instrument for tree height, slope angle, distance and tree diameters.

    By Masser Oy based in Rovaniemi, FINLAND.

  • Criterion RD 1000

    You may have to use basal area for variable plot cruising and determine if questionable 'borderline' trees are in or out of the plot. You may also have to measure a tree diameter anywhere on the stem and verify the height at which specific diameters occur. This is all easier said than done considering the available tools and technology you are ...

    By Positioning Resources Limited based in Aberdeen, UNITED KINGDOM. from Lasers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you