Only show results in Virginia? Ok

Disc Mower equipment

  • Agromaster - Model OBD - Disc Mower

    Disc mower is used to cut especially feed plants growing horizontally like vetch, white clover, lotus corniculatus and for reaping all kinds of meadow, pasture and feed plants by the efect of air stream provided during rotation of discs.Work and transport positions can be easily adjusted by the help of hydraulic system. By means of safety ...

    By Agromaster - a Registered Brand of Atespar Ltd. based in Selcuklu, TURKEY. from Mower Product line

  • SITREX - Model DM4 Series - Disc Mowers

    This SITREX mowers range, including 4 - 5 - 6 - 7 - discs machines, fits the requirements of small and large farms. The DM4 Disc mower, with 4 discs and 1.67m / 65' 3/4 working width is especially suitable for small farms. The DM5 Disc mower, with 5 discs and 2.05 m / 80' 3/4 working width has the peculiarity of two inner discs which turn to the ...

    By Sitrex Spa based in Trestina, ITALY. from DISC MOWER Product line

  • Model SC - 301 / SC – 301C - Disc Mower

    Working width 3,00 m.High cut quality.Double-sided clamping of cutter bar makes.robust unit together with frame.Skids made from high quality steel Friction clutch on PTO shaft protects mower against overloading Floating of cutter bar by cylinder springs.Breakaway device with adjustable triggering.force.Transverse copying of the cutter bar

    By Strojírny Rožmitál/RAVAK a.s. based in Rožmitál pod Tremšínem, CZECH REPUBLIC. from Disc Mowers Product line

  • Talex - Model OPTI CUT 280 - Disc Mower

    Rear mounted CUT series disc mowers, made by Talex , was delevoped in response of growing customers needs. New CUT series is based on newest technologies and queality materials, which improve working comfort. Mowers are made in four working widths L 2,1m  2,5m  2,8m 3,2m.

    By Talex s.j. based in Borzytuchom, POLAND. from Disc Mowers Product line

  • FELLA - Model 260 FK - 210 FK-S - Disc-mowers

    Work safely on alpine terrain thanks to the short, compact headstock and high-quality lightweight design. Centre of gravity very close to the tractor for optimum efficiency on slopes. Perfect quality of cut thanks to the cutter bar with compact angular gear.

    By FELLA-Werke GmbH - a brand of the AGCO Corporation based in Feucht, GERMANY. from Disc Mowers Product line

  • Model SD - 260 / SD - 300 / SD - 340 - Disc Mower

    Working width 2,60 / 3,00 / 3,40 m. High cut quality. Centre pivot suspension in the gravity centre of cutter bar. Double-sided clamping of cutter bar makes robust unit together with frame. Skids made from high quality steel. Hydraulic alleviation and possibility of an exact adjustment of ideal floating cut. Compact size – hydraulic elements ...

    By Strojírny Rožmitál/RAVAK a.s. based in Rožmitál pod Tremšínem, CZECH REPUBLIC. from Disc Mowers Product line

  • Model SD - 260C and SD - 300C - Disc Mower

    Working width 2,60m a 3,00m.Conditioner.High cut quality.Centre pivot suspension in the gravity centre of cutter bar.Double-sided clamping of cutter bar makes robust unit together with frame.Skids made from high quality steel.Hydraulic alleviation and possibility of an exact adjustment of ideal floating cut.Compact size – hydraulic elements ...

    By Strojírny Rožmitál/RAVAK a.s. based in Rožmitál pod Tremšínem, CZECH REPUBLIC. from Disc Mowers Product line

  • Rear - Model KDT Series - Disc Mowers

    KDT series of SaMASZ mowers is the most frequently purchased series in our offer. Since the beginning of their introduction to the market KDT mowers have been used by thousands of customers in Poland and in the whole world. During their design we took into consideration the most up-to-date global development trends. Thanks to that, KDT match ...

    By SaMASZ Sp. z o.o. based in Białystok, POLAND. from Disc Mowers Product line

  • Fella Alpine - Model SM210FK,SM 260 FK, SM 260 FP, SM 260 FP-S - Disc Mowers

    To also meet the demands of farmers in alpine regions, FELLA has developed the disc mowers in the SM 200 series. These are exceptional in their short, compact linkage. As a result, the centre of gravity lies close to the tractor and this leads to very good tracking stability on sloping terrain. Due to the centre swinging hitch (+/- 4°) of the ...

    By FELLA-Werke GmbH - a brand of the AGCO Corporation based in Feucht, GERMANY. from Disc Mowers Product line

  • Model EOS Series - Disc Mowers

    Flat and well profiled cutterbar with oil bath gears made of hard wearing steel - knives made from high quality steel - cutterbar with anti wear skids - bar lifing mechanism with hydraulic cylinder - hydraulic cylinder that enables working at a negative angle of tilt up to -35° - safety release system.

    By Tonutti Wolagri Highlight Srl based in Remanzacco (UD), ITALY. from Mowers and Mower Conditioners Product line

  • Model RD2400 - Disc Mowers

    6 Disc mower 2.4m cut

    By Reese Group Ltd based in Palmerston North, NEW ZEALAND. from Reese UFO- Disc Mowers Product line

  • Twose Opticut - Disc Mowers

    2.5m and 2.9m cutting widths. Three- point linkage- mounting. Quick and easy blade replacement. Heavy duty construction. Mechanical breakback. Four V-belt driven. Disc protection. Deck movement of -30° to +40°. Spring assisted weight distribution. Hydraulic folding 540 PTO over- run protection

    By Twose of Tiverton Limited based in Shropshire, UNITED KINGDOM. from Mowers/Tedders/Rakes Product line

  • Twose Silvercut - Model 270, 300, 340 and 380 - Disc Mowers

    2.5m, 2.9m, 3.25m and 3.7m cutting widths. Three- point linkage- mounting. Quick and easy blade replacement. Disc protection. Curved forged skids. Paired, rotating disc’s. Safety breakback. Heavy duty construction. Hydraulic folding. 1000 PTO slip clutch and over-run protection

    By Twose of Tiverton Limited based in Shropshire, UNITED KINGDOM. from Mowers/Tedders/Rakes Product line

  • Model Series: FR4 - FR5 - FR7 - FR8 - Disc Mowers

    Cutter Bar of round shape to avoid dragging of ground or fodder. Skates in heat-treated steel to allow a long wearing. Safety Release far automatic uncoupling in the event of collision. Road Transport hydraulic power is used to lift the implement. Stability and safety are assured as the mower doesn't stick out of the rear side.

    By Giaccaglia Giuliano & C. S.N.C. based in CERBARA, ITALY. from Mowers and Rotary Tedders Product line

  • Model MJ50-240 - Disc Mower

    The MAJOR Disc Mower has been designed to ensure you get a professional quality, clean cut every time. This machine allows a single operator to mount the mower onto the tractor quickly and easily without assistance. The heavy duty headstock and frame are designed for extra strength while the machine is working and during transport. The cutting bar ...

    By Major Equipment based in Mayo, IRELAND. from Toppers, and Flails Mowers Product line

  • Model EOS - Disc Mower

    Flat and well profiled cutterbar with oil bath gears made of hard wearing steel - knives made from high quality steel - cutterbar with anti wear skids - bar lifing mechanism with hydraulic cylinder - hydraulic cylinder that enables working at a negative angle of tilt up to -35° - safety release system.

    By Pioneer Equipment Co. based in Idaho Falls, IDAHO (USA).

  • Samba - Disc Mower

    The farmer disc mower is completely made by Samasz with a well proven design, accurate ground following suspension, hydraulic folding. A simple good value for money clean cut disc mower.

    By E F Weaving Ltd based in Worcestershire, UNITED KINGDOM. from Samasz Grassland Product line

  • Farm King - Model MDN 5, 6 and 7 - Disc Mower

    The Farm King MDN 5, 6 and 7 are constructed using only the highest-grade steel and gear components. Cutting discs and blades are easily accessible by removing six bolts and the sturdy cover to reveal the inner workings of each disc assembly. Tractors ranging in horsepower from 40 to 50 can operate the three exclusive mower sizes with ease. Two ...

    By Farm King based in Winnipeg, MANITOBA (CANADA). from Hay Tools Product line

  • PRERIA - Model KD 2400 & 2410 - Disc Mower

    Bottom drive disc mowers are used in mowing all types of green fodder plants for direct feeding, hay preparation or for ensilage. The bottom drive design ensures the material is uniformly distributed at the entire width of the swathe, which contributes to a homogeneous drying of the mowed grass and allows direct harvesting with round balers (by ...

    By Sipma S.A. based in Lublin, POLAND. from Other Products Product line

  • Caddy - Disc Mower

    The KMC Disc Mower Caddy is a pull type unit designed for attachment of a disc mower in order to provide all the benefits of a pull type mower.

    By Kelley Manufacturing Co. based in Tifton, GEORGIA (US) (USA). from Hay Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you