Felling Head Equipment Available In Africa
-
Manufactured by TimberPro Incbased in USA
40° Lateral Tilt Adapter (Optional 360°). Constructed from Grade 100 Material. 6500 lbs (with 40-deg tilt adapter) . 22" plus (56 cm) Cutting Capacity. 4.0 sqft Accumulation Area. Quadtooth® Bolt-on ...
-
Manufactured by Farmi Forest Corporationbased in FINLAND
A middle-sized felling head for tractors, forwarders, 5-8 ton excavators, and truck loader ...
-
Manufactured by TimberPro Incbased in USA
40° Lateral Tilt Adapter (Optional 360°). Constructed from Grade 100 Material. 4250 lbs (with 40-deg tilt adapter) . 32“ + (82 cm) Cutting Capacity. 2.0 sqft Accumulation Area. High Speed / Auto-Tension Saw with 3/4” ...
-
Manufactured by Prenticebased in USA
Center post saws with versatile sawheads used for felling small, medium and large ...
-
Manufactured by Farmi Forest Corporationbased in FINLAND
The smallest felling head for tractors and 5-8 ton ...
-
Manufactured by AFM-Forest Ltdbased in FINLAND
AFM 75 FH is a compact and cost-effective attachment for various forest operations. AFM 75 FH can be used in tree felling, cross cutting and even for loading. The AFM 75 FH Felling head is commonly used also in forest clearing after storm or for road, pipe line and power lines construction. The excavator equipped with AFM 75 FH can be an ...
-
Manufactured by Waratahbased in CANADA
The Waratah FL85 Series II felling head gives you maximum versatility. It’s a felling head, grapple, and saw — all in one. But this is no jack-of-all-trades, master-of-none. This well-engineered, highly productive attachment is made for major cutting and harvesting. The efficient SuperCut 300 saw unit provides fast ...
-
Manufactured by Moisio Forest Oybased in FINLAND
Powerful and versatile head. Excellent loading -> very good for a combi machines. Delimbing large opening (130 cm) to facilitate the loading of the trees. Accumulation or feed rollers can be installed later if necessary. Powerful knive cut is excellent when cutting energy trees and bushes. May be updated afterwards to saw or DualCut ...
-
Manufactured by Satco Limitedbased in NEW ZEALAND
SATCO has attachments extensively servicing New Zealand, Australia, The United States, Brazil, Chile, Asia, Africa and ...
-
Manufactured by Moisio Forest Oybased in FINLAND
Powerful and versatile head. Excellent loading -> very good for a combi machines. Delimbing large opening (130 cm) to facilitate the loading of the trees. Accumulation or feed rollers can be installed later if necessary. Hard wood cuts easily with chain saw. DualCut -knife is an ...
-
Manufactured by Moisio Forest Oybased in FINLAND
Lightweight And Versatile; Small and nimble head. Excellent loading -> Also works well in combi use. Great delimbing opening (102cm) to facilitate the loading of the collection, as well as twigs. Big feeding power (17kN) and speed (5m/s) rate for size class. Short grapple body is good when feeding complex trees. Accumulation capacity ...
-
Manufactured by Satco Limitedbased in NEW ZEALAND
Using all the proven hydraulic components of the larger SATCO SAT630, the SATCO SAT420 Directional Felling Head & Loading Grapple has quickly proven to be a very versatile unit enabling operators to fall, bunch, stack and shovel whole stems. The 360 Degree continuous rotation allows felling in any possible direction in relation to the ...
-
Manufactured by Satco Limitedbased in NEW ZEALAND
TheSAT630is a 30 Inch Directional Felling Head & Loading Grapple which has been proven in all parts of the world. It is a very versatile unit enabling operators to fall, bunch, stack and shovel whole stems. The 360 degree continuous rotation allows falling in any possible direction in relation to the base ...
-
Manufactured by Quadco Inc.based in CANADA
The 2900 Intermittent Disc Saw Head is based on a proven ring saw concept – 100’s sold worldwide. Substantial increase in power and speed with two UPGRADED DIN-Shaft F12-30 Motors, developing 150 hp (vs 96 hp for 2800). Rim speed is 750 rpm (450 rpm for 2800). Rated at 75 gpm and 2800 psi. Dual pinion (vs one for 2800) meaning ...
-
Manufactured by Quadco Inc.based in CANADA
Designed for Heavy & Tall Timber: 4 Independent arms with the “Arms Down” feature, for increased leverage & greater holding power in tall timber. Two cylinders per set of arms (instead of one cylinder with linkage) contributes to maximum holding power. All cylinders are cushioned to reduce wear and tear. Optional patented 360º wrist system using Quadco’s field ...
-
Manufactured by Quadco Inc.based in CANADA
Four-arm-up design with one cylinder and heavy-duty timing bar per set of arms. Optional 40° or 360° lateral tilt available for boom mount applications. Patented 360º wrist system using Quadco’s field proven double reduction gear box and two motors for maximum feller buncher versatility. Model 360-degree “High Torque” fits most applications. Extreme service model ...
-
Manufactured by Tigercat Industries Inc.based in CANADA
Tigercat's innovative line of patented bunching saws, significantly improves the productivity of the entire harvesting system in high volume plantation applications. Buncher productivity increases because more trees can be cut per cycle reducing unnecessary machine movement. Skidder productivity is improved because the bunches are large, well aligned an easy to pick up.The 5000 bunching shear is ...
-
Manufactured by Moisio Forest Oybased in FINLAND
Powerful and versatile head Delimbing large opening (94 cm) to facilitate the loading of the ...
-
Manufactured by Moisio Forest Oybased in FINLAND
Powerful and versatile head Excellent loading -> very good for a combi ...
-
Manufactured by Albach Maschinenbau AGbased in GERMANY
Chassis under carriage: Typ: Grove GMK3050 / 3055 / 3060 3-acle. transmission: automatic ZF-gear shift. Dimensions: Length: 10,75 m. width: 2,55 to 2,85 m (depending on tyre size). height: 3,98 m. weight: 27 t (+ felling head). ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you