Only show results in Virginia? Ok

Felling Head With Cutting Knive equipment

  • Moipu - Model 250 F1 - Felling Head with Knive Cut

    Lightweight And Versatile; Small and nimble head. Excellent loading -> Also works well in combi use. Great delimbing opening (102cm) to facilitate the loading of the collection, as well as twigs. Big feeding power (17kN) and speed (5m/s) rate for size class. Short grapple body is good when feeding complex trees. Accumulation capacity can be ...

    By Moisio Forest Oy based in Viitasaari, FINLAND. from Felling Heads Heads Product line

  • Moipu - Model 300 F1 - Felling Head with Knive

    Powerful and versatile head. Excellent loading -> very good for a combi machines. Delimbing large opening (130 cm) to facilitate the loading of the trees. Accumulation or feed rollers can be installed later if necessary. Powerful knive cut is excellent when cutting energy trees and bushes. May be updated afterwards to saw or DualCut (saw+knife)

    By Moisio Forest Oy based in Viitasaari, FINLAND. from Felling Heads Heads Product line

  • Model AFM 45 - Harvester Head

    AFM 45 is effective harvesting head for thinning and final felling done with small and medium-sized forest machines. An exact delimbing is made with four knives and a non-sliding four motor feeding. Tree handling capacity is optimized for small and middle sized stems. AFM 45 is equipped with powerful hydraulics and the automatic chain tensioning ...

    By AFM-Forest Ltd based in Jyvaskyla, FINLAND. from Harvester Heads Product line

  • Model H6 - Harvester Heads

    The efficiency, economy and compact size of the PONSSE H6 harvester head makes it the best general harvester head on the market. The PONSSE H6 harvester head is highly versatile, and its use ranges from thinning sites with small trees to regeneration felling.

    By Ponsse Plc based in Vieremä, FINLAND. from Harvester Heads Product line

  • Waratah - Model H290 - Harvester Head

    The Waratah H290 is a powerful, high-capacity new-generation harvester head. Built for superior performance in regeneration harvesting, it was specially designed for use with large wheel-and-track-based harvesters. The H290 features the highly efficient SuperCut 100 saw unit and can fell and process trees up to 760 mm (29.5 in.) in diameter. The ...

    By Waratah based in Kamloops, BRITISH COLUMBIA (CANADA). from Harvesting and Processing Heads Product line

  • Nisula - Model 425C - Multi-purpose Harvester Heads

    Nisula 425C is a multi-purpose harvester head equipped with grapple arms that make handling and sorting timber effortless. The NCU3 control system adjusts the grip force of the grapple arms to the tree stem being handled, enabling a firm grip of the stem during felling, feeding and moving operations. In combined use, the separate grapple arms also ...

    By Nisula Forest Oy based in Halli, FINLAND. from Multi-purpose Harvester Heads Product line

  • Eco - Model Keto-100 - Processor Harvester Head

    The structure of Keto-100 Eco Processor is based on the Keto-100 Eco Supreme harvester head. Thanks to its large grapple opening, it serves well as a multi-purpose harvester head that handles delimbing, cutting and sorting easily in mountainous terrains with steep slopes. If necessary, it can also be used for loading. The head has a fixed roller ...

    By Kone-Ketonen OY based in Kristiinankaupunki, FINLAND. from Harvester Heads Keto-100 Product line

  • Waratah - Model H412 - Harvester Head

    The Waratah H412 is a compact head made for small wheeled and tracked machines. With its powerful feed, accurate measuring, and excellent delimbing performance, the H412 combines the advantages of two and four-wheel-drive harvester heads. Its compact size makes it highly maneuverable in dense thinning stands, and its multi-tree-handling equipment ...

    By Waratah based in Kamloops, BRITISH COLUMBIA (CANADA). from Harvesting and Processing Heads Product line

  • Arbro - Model 400 & 1000 - Stroke Harvester Head

    Arbro-Stroke is a stroke harvester, which fells, delimbs and cuts trees to length.  Arbro-Stroke harvester is available in two models that can be easily installed on a standard loader. Arbro-Stroke 400 is especially meant for thinning operations and Arbro-Stroke 1000 can also handle bigger tasks. Compared to other same size harvester heads ...

    By Hakmet Ltd. based in Grenville, QUEBEC (CANADA).

  • Model SP 591 LX G2 - High Speed Harvester Head

    The SP 591 LX G2 is purpose built for harvesting and debarking of plantation grown eucalyptus. It is an extremely strong and tough harvester head, designed according to the LX principle for maximum reliability and productivity even under the toughest conditions. The uncompromised LX design is to be found all throughout the harvester head, from ...

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Model SP 461 LF - Big Little Harvester Head

    The SP 461 LF is a very fast, nimble high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 461 LF is perfectly suited to work on midsize thinning carriers with long reach as well as smaller in stand thinning carriers.  Fast feeding in combination ...

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Log Max - Model 4000B - Lightweight All-Round Harversting Head

    Log Max 4000B is a small head with large capacity. The impressive pulling force compared to the compact format makes Log Max 4000B the obvious choice for long-reach booms. Log Max 4000B, a lightweight all-round harversting head, is designed to carry out a wide range of harvesting jobs from the first thinning to light regeneration harversting. ...

    By Log Max AB based in Grangärde, SWEDEN.

  • Model SP 861 LF - Raw Power and IQ Combined Harvester Heads

    The SP 861 LF is a powerful and reliable high performance harvester head. It is designed according to the LF principle for maximum productivity. The SP 861 LF is specifically designed for installation on tracked carriers and demanding harvesting applications.

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Model SP 561 LF - High Performance All Round Harvester Head

    The SP 561 LF is a high-performance all-round harvester head. It is designed according to the LF principle for maximum productivity. The SP 561 LF is specifically designed for varied jobs and offers very good characteristics all the way from first thinning to medium final cut. The compact measurements in combination with a perfect delimbing down ...

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Model SP 761 LF - Heavy Duty and High Performance Harvester Head

    The SP 761 LF is a compact, heavy duty and high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 761 LF is suited for working on both large wheel based harvesters as well as tracked harvesters and excavator carriers.

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Log Max - Model 928A - Hydraulically Driven Saw

    The Log Max 928A features a hydraulically driven saw with pressure controlled sawing force and flow controlled chain speed. The high performance saw hydraulics provide full flow to the bottom saw resulting in fast cutting. This saw unit is able to fell trees up to 420 mm. This compact head weighs in at only 412 kg (908 lbs) in its standard ...

    By Log Max AB based in Grangärde, SWEDEN.

  • Terri - Model 34c Combi - Forwarder/Harvester Forestry Machines

    TERRI 34c is the latest of the TERRI forestry machines. Just like its predecessors it is a light, flexible machine, easy to use on all sorts of land. This new generation has, however, been developed on several important details. In order to increase both the loading area (2 m²) and the stability, the machine has been made wider, to 1.9 meters ...

    By Alfing i Älmhult AB/Terri based in Almhult, SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you