Only show results available in Virginia? Ok

fertilizer solution hose Equipment

  • PLUVIO - Dripping Hose System

    'PLUVIO' is a dripping system manufactured with a thin, flexible pipe, with fast water jets dripping devices inside, put at prearranged distances (from cm 15, 20 up to cm 150). It is made of polyethylene of very good quality, which guarantees maximum long-term dependability and the best performance as regards mechanical and tensile strength.

    By A.T.P. s.r.l. based in Barletta (BT), ITALY. from ATP Dripping Pipes & Hoses Product line

  • Orchard and Greenhouse

    Orchard and greenhouse projects include this products: Clear Braided PVC, PVC Chemical Spray hose, EPDM Rubber and Water Suction and Discharge hose, EPDM Air and Water hose, Green and Clear PVC Suction hose, PVC Lay flat discharge hose, Fertilizer Solution Hose, Polyethylene and Nylon tubing, Clear PVC Sight Gauge tubing, Cam & Groove ...

    By Specialty Sales Inc. based in Lyons, ILLINOIS (USA).

  • Inject-A-Cure - Injection System

    The Inject-A-Cure Solution injection systems are designed to accurately and consistently inject lime, gypsum, soil amendments or fertilizer into an irrigation system. We offer two types of injection machines.

    By Spraying Devices, Inc. based in Visalia, CALIFORNIA (USA). from Mixing and Injection Machines Product line

  • Model GX1 - Single Pump Manual Rate Controller System

    Looking for a simple solution for placing liquid fertilizer that has all the features to get you up and running quickly with no hassles? Over the years AgXcel has found many features and parts that are required to complete an in-furrow starter system that does not leave you high and dry when applying liquid. The AgXcel single pump solution with a ...

    By AgXcel, LLC based in Kearney, NEBRASKA (USA).

  • Model GX3 - 155 Gal. - Tank System

    AgXcel’s GX3 dual pump fertilizer application solution was designed for low volume applications. This is a perfect solution for low volume starter, insecticide, black label or other low application products. The GX3 was designed to be a completely self-contained solution incorporating a solution tank and complete pump application solution. A ...

    By AgXcel, LLC based in Kearney, NEBRASKA (USA).

  • Pumpset - Model CR - Nutrient Control System

    Zwart Systems has built a custom fertilizer injection pumpset for virtually every flow range and every crop imaginable in it’s long history of irrigation design. From small 40GPM systems to 700GPM vegetable range units, we’ve done them all.

    By Zwart Systems based in Beamsville, ONTARIO (CANADA). from Irrigation Product line

  • Model GX4 - Liquid Management System

    The AgXcel GX4 dual pump fertilizer application solution was designed for system control on any implement, especially planters and drills. The GX4 dual pump system can achieve approximately 6.1 GPM by utilizing a tandem plumbing design that consents for the equalization of product draw and pressurization. The system was designed to allow the ...

    By AgXcel, LLC based in Kearney, NEBRASKA (USA).

  • Model GX30iVRT - Pressure Controls System

    The AgXcel GX30i is an intelligent decision making microprocessor that manages and controls system pressure in a Variable Rate application environment. This patent pending solution was designed and developed by AgXcel to allow for the application of liquid fertilizer in an expansive range. Its dual valve management configuration is controlled by a ...

    By AgXcel, LLC based in Kearney, NEBRASKA (USA).

  • K-Line - Mid Effluent Dispersal

    Whether you are storing, transporting or distributing water or wastewater, K-Line has the solution for you. With a wide selection of strong supporting brands, K-Line can assist whatever your requirements.

    By K-Line Irrigation based in St. Joseph, MICHIGAN (USA).

  • K-Line - Standard Pod Effluent Dispersal

    Whether you are watering cattle, irrigating, or distributing wastewater, K-Line Irrigation has the solution for you. K-Line also has a wide selection of strong supporting sprinkler brands to custom design an irrigation system specifically to meet your needs.

    By K-Line Irrigation based in St. Joseph, MICHIGAN (USA).

  • NH3 Tank

    Well it is finally here and we have nicknamed it the 'Stubby 2000'.  Three and a half years ago Circle K Mfg Co purchased the first 3000 gallon NH3 tank manufactured by Trinity.  It was at that time that Circle K realized the need for a slightly smaller 2000 gallon tank with all of the features and benefits the 3000 offered.  It was ...

    By Circle K Manufacturing Co. based in Oregon, MISSOURI (USA).

  • Model B10 - Compact Bedformer for fruits and Horticulture

    Our adjustable Cosmeco bedformers are equipments of excellence to which is entrusted the creation of the seedbeds - that is the last and important step for soil preparing – for the harmonious development of the roots and the plant, with optimum and visible results on the quality of the crops.

    By Cosmeco s.r.l based in Ostiglia (MN), ITALY. from Bedformers and Plastic Mulch Layers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you