Only show results in Virginia? Ok

Flail Mower equipment

  • Flail King - Flail Mower

    74”, 88”, or 96” cutting width. Dynamically balanced cuttershaft. Fully enclosed drive belt with automatic spring tensioner. Full width anti-scalp roller. 1” – 6” cutting height adjustment. Hex shaped, self-aligning roller bearings with cast steel cap. 540 rpm, Category IV driveline with four plate slip clutch. ...

    By Terrain King based in Seguin, TEXAS (USA).

  • Magnum - Model 130 & 150 - Flail Mower

    Compact and lightweight, McConnel’s Magnum series flail mowers have a low power requirement and are ideal for customers with compact tractors.

    By McConnel Limited - a member of the Alamo Group based in Ludlow, UNITED KINGDOM. from Flail Mowers Product line

  • Bomford Turbo - Model VM1600 - Flail Mowers

    The Turbo VM flail mower is specifically designed for verge mowing over long sustained periods.  1.6m and 2.0m cutting widths. Plus 90 deg to minus 50 deg cowl angling . Direct drive through twin pivoting gearboxes. 750mm offset. Cat II three point linkage. Front mountable.

    By Bomford Turner Limited - a member of the Alamo Group based in Nr Evesham, UNITED KINGDOM. from Flail Mowers Product line

  • Votex - Model Landmaster - Flail Mowers

    The flail mower for large areas. The Landmaster is specially designed for the mowing of green manures, corn stubbles and wastelands. Besides this, the machine can be used for general landscape maintenance. The machine comes as standard with 1,3 kg flails for the mowing of the heaviest vegetation. Several options for front or rear mounting turn ...

    By Votex based in 7521, NETHERLANDS. from Flail Mowers Product line

  • Chipper - Model 660 - Flail Mower

    ENGINE: MITSUBISHI GM 301 LN OHV, Petrol 10 Hp (7,4 kW) - Single cylinder aircooled, 6 litre fuel tank, Oil bath air cleaner. STARTER: Manual Recoil. TRANSMISSION: Twin V-belt drive with tensioner. SPEEDS: 4 FW (1.2-2.0-4.0-6.9 km/hr), 2 RV (1.5-2.46 km/hr). WHEELS: 16x6.50x8 4 ply Agric. Tread.

    By Erreppi S.r.l based in Bevagna (Pg), ITALY. from Flail Mowers Product line

  • Flail Mowers

    Optional extras: manual or hydraulic sliding headstock; hammer blades in lieu of standard blades.

    By D W Tomlin based in Boston, UNITED KINGDOM. from Mowers Product line

  • Flail Mower

    Available in 60' – 90' widths. High flow not needed. Vertical float. Adjustable side sliders. Hydraulic motor 30 hp – approx. 17-25 gallons / minute.

    By Martatch Attachments based in Wellesley, ONTARIO (CANADA). from Mowers Product line

  • KRM - Model Cat - Flail Mower

    Ideal for the smaller tractor the Cat is the smallest of the KRM range. The Cat starts from just 1.35m and is available up to 2.1m. With its twin position headstock the Cat can be used either in line with the tractor or offset to one side. As with the rest of the range it features a full width rear roller, End skids and a PTO free wheel which ...

    By Keith Rennie Machinery Ltd based in Boroughbridge, UNITED KINGDOM. from Flail Mowers Product line

  • Orvin Baby - Model FTBY Series - Flail Mower

    Our baby Orvin flail mower is perfect for cutting grass, cane fruit and branches up to 20mm diameter. Made from 3mm steel plate, 100mm diameter rotor and 140mm diameter rear roller makes this is a robust little machine. Comes as standard with manual offset adjustment, adjustable skids, rear roller scraper and PTO shaft. Suitable for tractors from ...

    By Kirkland UK based in Canterbury, UNITED KINGDOM. from Flail Mower Product line

  • Cut & Collect - Flail Mower

    In a unique cooperation; Europe's leading airfield mowing specialist, Spearhead has joined forces with Europe's leading provider of collection systems, Trilo. By combining the knowledge and technical expertise of these two leading brands, we are now able to offer a new concept in airfield grass maintenance, Cut and Collect. Cut and Collect allows ...

    By GreenTec A/S based in Kolding, DENMARK. from Flail Mower Product line

  • Model T 10 - Flail Mower

    Machine suitable to cut the grass. Used to maintain grassy soil in gardens, parks and golf courses. Equipped with knives to cut the grass and eventual small residual trimmings remaining after pruning or with hammers suitable to carry out a perfect levelled result. 4 models are available following the different working width 100, 120, 140, 160 cm. ...

    By Ortolan Zappatrici S.n.c. based in MONTEBELLO VIC.NO - VI, ITALY. from Flail Mowers Product line

  • Parkway Meteor - Model 3 - Flail Mowers

    Versatile. Manoeuvrable. Flexible. High Performing. With an unprecedented 2.15 metres (84.6”) width of cut coupled with an impressive quality of cut, Ransomes Jacobsen has launched the new Parkway 3 Meteor mower for the municipal and landscape contract market. Major constraints in the local authority and landscape contract markets have ...

    By Ransomes Jacobsen Ltd. based in Ipswich, UNITED KINGDOM. from Flail Mowers Product line

  • Magnum Euro - Flail Mower

    Tougher, stronger and more productive than the popular Magnum Elite Series, McConnel’s Euro machines offer a choice of 2.3m, 2.45m, and 2.8m cutting widths and make light work of material up to 50mm thick. Designed for professionals, the Euro series can tackle grass, bushes and maize stubble giving it a versatility that is much sought after ...

    By McConnel Limited - a member of the Alamo Group based in Ludlow, UNITED KINGDOM. from Flail Mowers Product line

  • Model MMT - Flail Mowers

    MMT is particularly suited for cutting grass on all green areas, in orchards and vineyards and for cutting crop residues. It is purposed for cutting material till 3 cm, on small agriculture areas. Its light weight and its low power requirement means that it is best suited to small tractors. Double spiral rotor means low maintenance, high ...

    By INO BREZICE d.o.o. based in Krska vas, SLOVENIA. from Flail Mowers Product line

  • Model QHD Series - Flail Mowers

    The Spearhead QHD series is the original heavy duty flail mower and a pioneer in versatility that is preferred by many professional customers to this day.

    By Spearhead Machinery Ltd based in Evesham, UNITED KINGDOM. from Flail Mowers Product line

  • Land Pride - Model FM 21 Series - Flail Mowers

    Land Pride Flail Mowers are the perfect choice for schools and other recreational areas when people may be present. The duck footed blade on the 21 Series gives a nice even cut and tapered ends on the rear roller prevent gouging during tight turns. With the FM21 Series rotor working in the opposite direction of travel, the cut grass is brought up ...

    By Land Pride - Great Plains Manufacturing based in Salina, KANSAS (USA). from Grooming Mowers- Flail Mowers Product line

  • Model M2-C150 & M2 G170 - Flail Mower

    Lightweight and compact. One-side swing. Lateral movement parallelogram.

    By Ilmer Maschinenbau Ltd. based in Ciardes, ITALY. from Flail Mowers Product line

  • Model LMG - Flail Mower

    Can be mounted on both sides. Two movable blades in the main unit. Linear, continuous and separate cut width adjustment.

    By Ilmer Maschinenbau Ltd. based in Ciardes, ITALY. from Flail Mowers Product line

  • Model TR 500 - Flail Mowers

    ENGINE B&S series 950E Kw 4,2 (Hp 5,6) gasoline,  with recoil starter.

    By Meccanica Benassi S.p.a. based in Area Industriale Dosso (Ferrar, ITALY. from Flail Mowers Product line

  • Model TLJ - Flail Mowers

    Light flail mower. CAT I three point hitch. Single speed gearbox with internal free wheel clutch. Pto 540 rpm. Height adjustable rear roller.Side drive by 2 belts.Outer width = Working width +11 cm / 4'. Reversible gearbox and three point hitch. Skids as low side guards. 100-D (+10 Kg / 22 Lbs) Included Pto shaft

    By Bison A&I Europe, S.L.U. based in Centelles, SPAIN. from Flail Mowers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you