Forage equipment in Oregon

  • Model F-41 - Rotary Corn Head Forage Harvester

    The industry’s quickest, simplest, 1 sided, 1 bolt shearbar adjustment is an EXCLUSIVE DION DESIGN! Dion reversible shearbars are hardened for added strength & longevity. Both cutting edges are tungsten carbide coated creating a self-sharpening wear pattern for consistent chop quality.

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Forage Harvester Product line

  • Stinger - Model F-41 - Forage Harvester

    Easily load to the left or right, the stinger raises up to a height of 18.5’ (5.6 m) with a length of 18’ (5.5 m) and offers 280° rotation with a 4 m minimum reach. The modular design is convertible from the side loading to a trailed loading configuration.

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Forage Harvester Product line

  • Model S 55 & S55 HO - Forage Blower

    The auger is driven by 2 sets of double 5VX type V-belts on cast iron pulleys. The feed auger has a 2” Ø drive shaft mounted on 2 cast iron, NTN, flanged ball bearings. The large 14” Ø with 10” pitch (optional 16” Ø with 16” pitch) auger ensures a positive and even feed to the fan. The throw-out ...

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Other Products Product line

  • Model XL/XLT/XLS & XLN - Forage Box

    More upright posts aren’t always the best solution for rigidity. Dion engineers opted instead for a system of ‘tie  rods’ that connect both sides of the box, through the frame, at each upright post. This in conjunction with 20 ga  Galvalume  with 3/4” (91.9 cm) ribbing, results in remarkable rigidity. On top ...

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Other Products Product line

  • Versa - Model ID1014 - Silage Baggers

    The Versa ID1014 is our largest machine with capacity for one to two large forage harvesters. Made with a structural steel frame, this high-power bagging machine comes with a 550 HP (413 KW) engine and long tunnels handling 13+ tons of bagged materials per minute.

    By Versa Corporation LLC based in Astoria, OREGON (USA). from Silage Baggers Product line

  • John Deere - Model 3955 - Pull-Type Forage Harvester

    Get better quality-of-cut while using less fuel. The 3955 Pull-Type Forage Harvesters deliver more tons of crop per hour while using less fuel.

    By John Deere Distributor in OREGON (USA).

  • Versa - Model ID900N - Silage Baggers

    The Versa ID900N is the leading side-loader storage technology fit for forage wagons. Relative to the ID891, the Versa Bagger ID900N is a high capacity bagger able to keep up with larger choppers and bag up to 12-foot diameter bags, using tractors up to 240 PTO HP. The Versa ID900N Bagger is available in three interchangeable tunnel sizes – ...

    By Versa Corporation LLC based in Astoria, OREGON (USA). from Silage Baggers Product line

  • Versa - Model ID900N - Silage Baggers

    The Versa ID900N is the leading side-loader storage technology fit for forage wagons. Relative to the ID891, the Versa Bagger ID900N is a high capacity bagger able to keep up with larger choppers and bag up to 12-foot diameter bags, using tractors up to 240 PTO HP. The Versa ID900N Bagger is available in three interchangeable tunnel sizes – ...

    By Versa Corporation LLC based in Astoria, OREGON (USA). from Silage Baggers Product line

  • Model F63 - Rotary Corn Head

    Model for self-propelled forage harvester. 3 m wide (10') or, 4 rows of 30''. Available for JD and NH harvester.

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Rotary Corn Head Product line

  • Model F61 - Rotary Corn Head

    The only rotary corn head for pull-type forage harvester on the market. 3 m wide (10’), 4 rows of 30”. For tractors from 130 to 300 hp.

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Rotary Corn Head Product line

  • Model F64 - Rotary Corn Head

    The only rotary corn head for pull-type forage harvester on the market. 2,25 m wide (90'), 3 rows of 30”. For tractors from 120 to 240 hp.

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Rotary Corn Head Product line

  • John Deere - Model 972 - Flail Chopper

    The rugged, simple design of the 972 Flail Chopper provides dependable performance. Two rows of double-edged knives cut the standing crop and lift it to a transfer auger. The 12-in., 300-rpm auger then moves the material to a knife-equipped fan where three blades size the forage even further.

    By John Deere Distributor in OREGON (USA).

  • AcreMaster - Micro Pivots

    In a class of their own, PIERCE Micro Pivots and Linears are the strong, lightweight, less expensive alternative for irrigating small to medium sized fields. Their low power consumption, efficient use of energy and resources, and standardized components make them inexpensive to operate and easy to assemble. PIERCE Micro Systems feature ...

    By Pierce Corporation based in Junction City, OREGON (USA). from Gentleman Farmer Product line

  • Landini - Model Alpine Series - Compact Tractor

    The Alpine series completes the new Landini tractor range with a powerful, lightweight and versatile tractor designed to meet the demand for high productivity in the low-power range (69,5 to 81 HP ISO). The Alpine series comes in two versions - Standard and GT - and in a choice of 4 four-wheel drive models - 70, 80 and 85. The Alpine STD version ...

  • Harvestore - Grain Silos

    Harvestore silos increase productivity through better feed storage methods.

    By CST Industries Inc Distributor in OREGON (USA). from Agriculture Products Product line

  • Model 6096 - Windrow Inverter

    Dion’s swath turner does more than just deflecting swath, it replaces curing and swathing. On the first pass, the windrow inverter is moved on a dry ground and turned completely to expose the moist side. The sun takes care of the drying. A second pass allows the swath to dry completely and brings together dry hay when needed. The lifter ...

    By Dion-Ag Inc. Distributor in Tillamook, OREGON (USA). from Other Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you