Forage Equipment Near Monaco
-
Manufactured by Riberi, By Damilano Group Srlbased in ITALY
The Riberi RS 140 is our largest model, built for big farms with more than 100 head of cattle. Elevator, conveyor, and door are hydraulically controlled; the mower is mechanical, but its activation is hydraulically ...
-
Manufactured by Riberi, By Damilano Group Srlbased in ITALY
The Riberi RS 65 self-loading cutter wagon is the most compact machine of the two- axle range. The machine is fitted with a mechanical tandem axle that allows for adaptation on uneven ground; this oscillation is independent on both sides to minimize direct impacts on the frame. On request, this machine comes with hydraulic drives: Loading Elevator – Body Conveyor – Rear ...
-
Manufactured by Riberi, By Damilano Group Srlbased in ITALY
The Riberi RS 45 Towed Self-Loading Cutter Wagon is practical, maneuverable and compact. It Is very stable even on steep ...
-
Manufactured by Gal.Cobased in ITALY
The ideal for spreading and tedding any type of fodder. Fast and careful tedding for the best possible forage qua-lity. Many models, suitable to meet your requirements, start from 2,50 m.(8') up to 8,50 m. (28'4') of working width, you can select the 3 point mounted or drawbar pulled types, hydraulic or manual raising on the 4 rotors. Only ...
-
Manufactured by Gal.Cobased in ITALY
The ideal for spreading and tedding any type of fodder. Fast and careful tedding for the best possible forage qua-lity. Many models, suitable to meet your requirements, start from 2,50 m.(8') up to 8,50 m. (28'4') of working width, you can select the 3 point mounted or drawbar pulled types, hydraulic or manual raising on the 4 rotors. Only ...
-
Manufactured by Gal.Cobased in ITALY
Particularly suitable for the treatment of alfaalfa, clover and leguminous plants. The roller rib intersection is regular, and the rotation system convergence ensures excellent product treatment in such a way that the drying speed of the stems is the same as thet of the leaves. . The forage dries faster and more evenly, the product ...
-
Manufactured by Lerda Agri SRLbased in ITALY
The traditional 'LERDA' baler has been present on the markets for over 50 years. Improved over the years, it is now produced in a wide range of models. It has proven to be the ideal baler for harvesting forage, rice and wheat straw, maize plants and the like in 32x42 or 36x46 cm bales, from 80 to 100 cm in length. Small-dimension and ...
-
Manufactured by Lerda Agri SRLbased in ITALY
LERDA is the first ROUND BALER with 'rotary chamber' in the market. It has been designed and developed to comply with the most various requirements of forage harvesting. It permits to harvest and bale wheat and rice straw, glass and forage for siloed products, corn stalks etc... It can work under any temperature and humidity conditions ...
-
Manufactured by Abimac s.r.l.based in ITALY
This rake is ideal for fast, clean raking of valuable fodder crops of hayor silage. Designed to produce fluffy swaths from light or heavy mown fodder, this PTO driven rake is fitted with 13 detachable tine bars, each with 4 double tines per arm. To assist in all conditions there is a variable tine bar cam, easily adjusted to ensure a clean sweep of all crops. This complete cam assembly operates ...
-
Manufactured by Abimac s.r.l.based in ITALY
be adjusted manually on the extractable arms in order to adapt the rake to the cutting bar width.Ideal to make forage swaths in general, but especially of alfalfa immediately after harvesting to form a soft and perfectly symmetrical swath. After road transportation the operator does not need to get off the tractor to start working. The machine is ...
-
Manufactured by Abimac s.r.l.based in ITALY
The rotary rakes series BORELLO 3.8 are reserved to those who wish to make perfect swaths, soft and fluffy for dry as well as for damp forage. The gearbox is in oil bath and completely maintenance-free for an excellent durability. The BORELLO version 3.8 F with fixed frame is a very stable rake, easy to use even on steep hilly or mountain ...
-
Manufactured by Abimac s.r.l.based in ITALY
width can be adjusted manually on the extractable arms in order to adapt the rake to the cutting bar width. Ideal to make forage swaths in general, but especially of alfalfa immediately after harvesting to form a soft and perfectly symmetrical swath. After road transportation the operator does not need to get off the tractor to start working. ...
-
Manufactured by Abimac s.r.l.based in ITALY
The rotary rakes of the BORELLO series 3.5 are reserved to farmers who wish to make perfect fluffy swaths of dry and wet forage. A maintenance-free oil-bath gearbox garantees an excellent long life. The BORELLO version 3.5 F with fixed frame is a very stable rake, easy to use even on steep hilly or mountain slopes. The BORELLO version 3.5 ...
-
Manufactured by Bravo Srlbased in ITALY
The SBI 1480 unwinders can hold a 120 cm round bale for any diameter. The SBI/I Hybrid is equipped with the unrolling chain with the sleepers that allow the use of particularly chopped products and, thanks to the independent motor on the conveyor and the “short-straw kit”, prismatic bales can be used. The strings or the net that wrap around the bales are easily eliminated by the ...
-
Manufactured by Morra Macchine Agricole s.n.c.based in ITALY
This mower gets a clean cut even under the toughest conditions and it has a reduced power absorption. The manufacturing quality of MORRA drums is based on decades-long experience. Silent running and linearity in the motion's drive by four V type belts and by reinforced gears. It can work on +/- 25 ° ...
-
Manufactured by Morra Macchine Agricole s.n.c.based in ITALY
This full range of models is a real asset for farmers. From a minimum working width of 2.80 up to 8.80 mts, compact and lightweight types. Slopes or big flat lands, everyone can find his own implement. Excellent fluff and rapid grass drying. Maintenance-free rotors, easy to adjust for the narrow transport shape. Anti-swings springs guarantee stability during slopes ...
-
Manufactured by Morra Macchine Agricole s.n.c.based in ITALY
This mower has a center suspension system that makes ground following easier where the three-point linkage offers a significant reduction in transport sizes. The mower is available in 6 -7- 8 discs and it’s mostly suitable for small and medium farms. Standard equipment: Pto shaft with automatic clutch. Four transmission belts. Hydraulic lift and safety hook. Thick plastic canvas. Automatic ...
-
Manufactured by Morra Macchine Agricole s.n.c.based in ITALY
You can choose for your farm from 280 cm. up to 450 cm. width rake. Rotor with grease lubrication. Long and flexible tines achieve an excellent harvest without damaging the grassy surface. The machine can be adjusted through quick operations, on Performance serie springs inclination can be set to anticipate or delay forage collection. ...
-
Manufactured by Morra Macchine Agricole s.n.c.based in ITALY
Our disc mower and his design guarantees excellent durability and power absorption. The disc's shape prevents hay build-ups and it can be easily removed and replaced. The hydraulic lift gives maximum stability and safety while on the road since the mower does not lean over. Large diameter drive line with gears protected against heavy impact. Thanks to excellent construction quality, ordinary ...
-
Manufactured by Morra Macchine Agricole s.n.c.based in ITALY
Lightweight machines with efficiency advantages over larger and heavier models, once the grass is cut it’s stored in the cage through a feeder. All models have a front 187 cm. drum mower. The machine has its own central hydraulic system. All models have 11.5.15 tires as a standard. A/55 - A/65 can be purchased with two-sides unloading system. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you