Show results for
Refine by
Forage Baling Loader Equipment & Supplies
53 equipment items found
Manufactured by:Mil-Stak Mfg Co. based inFruitland, IDAHO (USA)
The model 1030-s is designed with a solid, nonadjustable frame to fit 3x4 bales and includes a three spring cushion ...
Manufactured by:Mil-Stak Mfg Co. based inFruitland, IDAHO (USA)
The model 1032 is designed with an adjustable frame, allowing it to handle 3x3 and 3x4 bales. It comes with a two spring and a three spring cushion bumper. By removing four bolts and two pins the clamp can be switched between 3x3 and 3x4 bale sizes in less than fifteen ...
Manufactured by:Mil-Stak Mfg Co. based inFruitland, IDAHO (USA)
The model 1028-s is designed with a solid, non-adjustable frame to fit 3x3 bales and includes a two spring cushion ...
Manufactured by:Giaccaglia Giuliano & FIGLI s.r.l. based inCerbara PG, ITALY
Mounting directly on three point hitch this loader is ideal for front and rear hitching. Its robust construction and double supporting arms it to lift as high a s380 cm while maintaining maximum ...
Manufactured by:Besler Industries, Inc. based inCambridge, NEBRASKA (USA)
Extendable arms is an option that can be ordered with any 3000 Series Bale Loader. The same features and options that pertain to the 3000 Series Bale Loader also apply to the 3000 Series Bale Loader with the extendable arm ...
Manufactured by:Besler Industries, Inc. based inCambridge, NEBRASKA (USA)
Besler Industries has two styles of tool boxes available for the bale beds. The crossbed tool box is designed to set on the bed against the headache rack. It is a tapered tool box that allows for storage, but does not interfere with the bale that is loaded on the bed. The under the bed tool boxes come in a variety of sizes and are mounted under the bed typically in the front portion of the ...
Manufactured by:Bugnot based inRoches-Bettaincourt, FRANCE
Handling device for rectangular boots with hydraulic clamp for holding the boots in the upper part. Height of the clamp arms 1.50m4 teeth of Ø 45mm at the bottom and 4-tooth clamp at the top. Allows you to take 3 boots of 1.20m, 4 boots of 0.90 m or 5 boots of 0.70m in height. ...
Manufactured by:Alberti s.n.c. based inSoave di Porto Mantovano (MN), ITALY
Automatic bale-rollerholder with revolving hayfork. Models AM/6 (2 axles) and AM/5 (single axle) are equipped with the same fully hydraulic system as the SPECIAL series and, again automatically, they load the bales vertically with the aid of just the tractor driver. Quickly adjustable for the various bale sizes, they are a valid cost-effective alternative ...
Manufactured by:K&M Manufacturing Co., Inc. based inTaylor, TEXAS (USA)
Heavy Duty 3-Pt Bale Spike : Solid Points, Category II ...
Manufactured by:Bugnot based inRoches-Bettaincourt, FRANCE
4 tines : 45 mm diameter and 1160 mm long. Height: 2325 mm. Width: 1800 mm. Approximate weight depending on brackets: 230 kg. Maximum load at 500 mm : 2000 kg. Tine angling: 0 to ...
Manufactured by:Humpolecké strojírny Humpolec a.s. based inHumpolec, CZECH REPUBLIC
The bale fork with three prongs enables you comfortable and safe moving of round and even square bales without any risk of falling out or turning ...
Manufactured by:Besler Industries, Inc. based inCambridge, NEBRASKA (USA)
The Model 1000 tractor mount bale unroller is an economical way to handle your big round bales. It is quick hitch ready, and can handle bale widths of four, five, or six feet. The model 1000 comes complete with hydraulic cylinders and hoses. ...
Manufactured by:Car-Gar, S.L. based inValtierra (Navarra), SPAIN
Maximum load of 70 K. To be placed on an agricultural trailer and dump truck. Optional: electrical loader 12 and 24. Includes anchor ...
Manufactured by:Norden Mfg LLC based inNorth Bloomfield, OHIO (USA)
The KN618 Tie-Grabber picks up and ties bales that are arranged by the AE18 bale accumulator. Three long, six wide, on edge. The 18-bale arrangement offers a 17% time-saving advantage in comparison to a 15-bale option, with each grab containing 20% more bales and with a 17% reduction in the number of bundles. Bundle arrangement ideal for filling van trailers from the rear and for filling 9’ ...
Manufactured by:Bugnot based inRoches-Bettaincourt, FRANCE
The CAROLEV FRONTAL is fitted with 4 tines Ø 45 exposed length 890 mm. As with all the other equipment in the range, brackets are available to enable the CAROLEV Frontal to be fitted to all types of telescopic handler. ...
Manufactured by:Alberti s.n.c. based inSoave di Porto Mantovano (MN), ITALY
AM SPECIAL automatic patent bale-rollerholder. The AM SPECIAL bale-rollerholder is the most functional answer for collecting, transporting and unloading cylindrical or prismatic bales of both dry and green forage. Thanks to the articulated floating loading hayfork and the entirely hydraulic system, the cylindrical bales are quickly collected entirely automatically as they leave the press, by a ...
Manufactured by:Brazzen Rural Products Pty Ltd based in, AUSTRIA
This Bale Loader Trailer has been designed to make feedout time a breeze! The trailer allows the bale to be un-rolled easily and consistently. The trailer is also supplied with an additional attachement so that wire can be fed out to help with that wonderful task of ...
Manufactured by:Attec International bvba based inMarkegem, BELGIUM
Applications: Handle bales of straw. For SSL and Articulated Loaders. ...
Manufactured by:Attec International bvba based inMarkegem, BELGIUM
Applications: Handle bales of straw. For Telescopic Handlers. ...
Manufactured by:Demir Packing & Agricultural Machinery based inKonya, TURKEY
Bale loading machine is designed for picking the bales which is prepared and left on land by bale machines and loading them to directly to trailer, lorry or truck. The machine transfers the bales through pickup chains to transport chain, transport chain transfers the bale to the farthest point of the trailer. The machine is connected to tractor by drawbar system and can take position pursuant to ...