Only show results in Virginia? Ok

Forage Harvester Header equipment

  • Kemper - Model 460plus - Harvesting Header

    The 460plus harvesting header with four big gatherer drums and two intake drums is a sturdily built, no-nonsense machine. With its working width of 6.0 metres it fits perfectly into the KEMPER product range. When harvesting maize over 4.0 metres, the 460plus  shows its real ability. The big gatherer drums ensure almost loss free feeding. ...

    By KEMPER GmbH & Co. KG based in Stadtlohn, GERMANY. from Harvesting Headers Product line

  • Kemper - Model 330 - Harvesting Header

    The 330 operates in an open cut mode. Fast and uncompromising. 4 cutting rotor blades enable operation regardless of the distance between rows and over a wide range of crops. The row independent cutting technology makes it possible to operate in the field from any direction - particularly important when harvesting laid crops.

    By KEMPER GmbH & Co. KG based in Stadtlohn, GERMANY. from Harvesting Headers Product line

  • Kemper - Model 445 - Harvesting Header

    The proven header for harvesting thin-stemmed crops. The simple, practical design of the rotary intake system, consisting of four intake and two transport drums, ensure that service and maintenance work is kept to a minimum.

    By KEMPER GmbH & Co. KG based in Stadtlohn, GERMANY. from Harvesting Headers Product line

  • Kemper - Model 475 - Harvesting Header

    The ideal header for harvesting high-yielding maize. With a working width of 7.5m, the 475 is the largest header in the 400 series. The two, small outer conveying drums, which reliably transfer the maize inwards towards the large drums, are a special feature.

    By KEMPER GmbH & Co. KG based in Stadtlohn, GERMANY. from Harvesting Headers Product line

  • Kemper - Model 300 series - Harvesting Headers

    The headers of the 300 series operate in an open cut mode. Fast and uncompromising. Up to 6 cutting rotor blades enable operation regardless of the distance between rows and over a wide range of crops. The row independent cutting technology makes it possible to operate in the field from any direction - particularly important when harvesting ...

    By KEMPER GmbH & Co. KG based in Stadtlohn, GERMANY. from Harvesting Headers Product line

  • Forage Harvesting

    Double-drum stripper header «Agro-Soyuz-Slavyanka» is designed to harvest grain crops and grass seeds by means of direct combining.

    By Agro-Soyuz Holding based in Yubileyny town, UKRAINE.

  • Model LH II - Forage-Harvester

    The LH II  is a Forage-Harvester designed to be powered and mounted on reverse drive tractors.  Metal detector with adjustable sensitivity  Auto-sharpening controlled from the cab with automatic shear-bar positioning and  knock sensors  full auto-lubrication system self-contained on-board hydraulics for feed-roller and header drive, enabling ...

    By LACOTEC GmbH based in Reichshof, GERMANY.

  • Model MFH3200RC-5020RC - Forage Harvester

    Width of feed roller (cm) : 32, 40, 50. Number of row : 2 or 3. Tractor required HP kW (PS) : 40.5 – 88 kW (55 – 120PS). STAR forage harvesters have wide cylinder type cutter which chops the corn or sorghum speedy and precisely. Special designed row-crop header with high durability gathering chain enables high-speed working in weedy ...

    By IHI STAR Machinery Corporation based in Chitose-shi, JAPAN.

  • Krone - Model BiG X 480 - 530 - 580 - 630 - Forage Harvester

    Constant engine outputs from 490 to 626 hp. 6 intake rollers for extra safety and a top quality chop. Universal MaxFlow cutterheads: 20, 28 or 36 knives. Biogas cutterhead: 40 knives. KRONE VariStream: Spring-loaded floors for a continuous crop flow. KRONE VariQuick: engage and disengage the corn conditioner in an instant. KRONE StreamControl: ...

    By Krone based in Spelle, GERMANY.

  • Champion - Forage Harvester

    The CHAMPION Harvester is designed to be used within the industrial sector of agriculture, dehydrating industry, bigger farms and contrac-tors, making demand for long reliability and low operating costs. Trailer system with up to 65m. High tipping hopper with chain unloading in a hight of 3,2m

    By Champion Danmark A/S based in Christiansfeld, DENMARK. from Champion Products Product line

  • Model SWW type 600 - 2-Axle Header Trailer

    2-Axle Header Trailer for Cutting Platforms of Forage Harvesters. In order to reduce time lost during transportation forage harvesters are usually driven fast on the road. Therefore our header transporter type 600 is braked on both axes as standard equipment and meets all the requirements of traffic regulations for approval up to 40 km/h. A long ...

    By Zürn Harvesting GmbH & Co. KG based in Schöntal-Westernhausen, GERMANY. from Header Transporter Product line

  • Forage Harvesters Attachment Kit for Maize Headers

    Attachment kit for forage harvesters: it allows to operate a maize header - fixed or foldable - with any forage harvester make and model.

    By Tecnomais Srl based in Ceresara, ITALY.

  • QuickcutGB - Model QC 640 - Self-Propelled Forage Harvesters

    Proudly introducing the largest of our wholecrop headers, the new QC 640 has been designed for large scale operations whilst maintaining the simplicity throughout the Quickcut range.

    By Quickcut GB based in UNITED KINGDOM.

  • QuickcutGB - Model QC 400 - Self-Propelled Forage Harvesters

    Built with the farmer or smaller contractor in mind, the QC 400 is a highly capable yet economic wholecrop header.  With a 4 meter cutting width, it can give remarkable outputs for its size in all crop conditions and is capable of harvesting 5-6 acres per hour.

    By Quickcut GB based in UNITED KINGDOM.

  • Kemper Champion - Model C1200 - Mounted Forage Harvesters

    Kemper offers a complete line of tractor mounted forage harvesters with row independent rotary crop headers. The Champion C 1200, C2200 and C3000 equipped with rotary crop headers have working widths of 1.25, 2.25 and 3.0 m (2, 3 and 4 rows of 75cm). For the harvest of swathes, the C 2200 and C 3000 can be optionally equipped with a pick-up of 2.0 ...

    By Champion Danmark A/S based in Christiansfeld, DENMARK. from Kemper Products Product line

  • QuickcutGB - Model 580 - Self-Propelled Forage Harvesters

    This is the original Quickcut model, refined over the years to produce a wholecrop header used around the world in a wide range of crops from short green grass to 3 metre high milo.  Now with a stainless steel bed, enhanced driveline protection and a floating auger all come as standard in 2010.

    By Quickcut GB based in UNITED KINGDOM.

  • PALESSE - Model FT40 - Pull-Type Forage Harvesting Combine

    Pull-type forage harvesting combine “PALESSE FT40” is used for mowing down corn, in stages of wax and full ripeness of corn seeds, sorghum, sunflower and other high-stemmed crops, for mowing down grass and picking up dried seeded and natural grass from swaths with chopping and loading of the mass into transport trailer.

    By Gomselmash based in Gomel, BELARUS. from Pull-Type and Mounted Forage Harvesting Combine Product line

  • MacDon - Model D65 - Windrower Draper Header

    A significant leap forward in draper header technology, MacDon D Series Drapers offer improved capacity and provide the operator with unparalleled productivity. Better still, D Series Drapers are true multi-crop harvesting solutions letting you cut just about any crop without having to swap headers. Not only are they perfect for harvesting ...

    By MacDon Industries Ltd. based in Kansas City, MISSOURI (USA). from Self-Propelled Windrowers and Headers Product line

  • MacDon - Model A30 and A40 - Auger Headers

    The machine that’s redefined auger windrowing capacity, reliability, conditioning and windrow formation: these are the hallmarks of a great auger windrow. They are also exactly what you get with MacDon’s A Series Augers thanks to the single-minded efforts of MacDon’s engineers to produce the best auger windrower possible. They ...

    By MacDon Industries Ltd. based in Kansas City, MISSOURI (USA). from Self-Propelled Windrowers and Headers Product line

  • Model D65 - Draper Header

    The MacDon D65 Draper Header is designed to deliver outstanding straight cut performance, especially when faced with tough harvesting conditions. Low podding, downed, tangled, or even lodged crops; whatever the harvesting situation the MacDon D65 Draper Header excels. Combining or swathing, the D65 is a true multi-crop harvesting solution. This ...

    By MacDon Industries Ltd. based in Kansas City, MISSOURI (USA). from Draper Headers for Combines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you