Only show results available in Virginia? Ok

forest engineering Equipment

  • CAB - Attachable Heads for Dragshovels

    Special for roadside works, civil works and small cliaring works.

    By Belafer Industries S.L. based in Fraga, SPAIN. from Forest Product line

  • JAPA - Model Forest Pro 60 - Log Splitter

    Japa Forest Pro Log 60 A Handy Splitter in Co-Operation with BRP. The Forest Pro Log 60 hydraulic splitter can be used for even the biggest logs, the widest diameter being 60cm. It comes equipped with a splitting knife which splits logs in two or four. Thanks to its large tyres, the machine is easy to use in the forest.  The ...

    By Laitilan Rautarakenne Oy based in Laitila, FINLAND. from Forest Pro Log/BRP Product line

  • Komatsu Forest - Model 901TX.1 - Wheeled Harvesters

    The Komatsu 901TX.1 is the new version of our market-leading thinning harvester. A combination of new and existing advantages provides almost unbeatable productivity, low environmental impact and economic operation.

    By Komatsu Forest based in Umeå, SWEDEN.

  • Forest Master - Small Harvesters

    No matter what time of year or what kind of terrain you work, Usewood Forest Master is ready to work with you. Tough job in young forests can be done easier, productively and in comfort. Using Forest Master you will step in a new era of forestry. Usewood Forest Master small harvester gives you environmentally friendly way to manage young stands. ...

    By Usewood Forest Tec Oy based in Jyväskylä, FINLAND. from Small Harvesters Product line

  • Neuson Forest - Model 243 HV / HVT - Felling Harvester

    There are two versions of this final felling harvester available. The 243 HVT (Tilt) is equipped with the tried and tested upper carriage levelling system and allows for stress-free work in steep and poorly accessible terrain. The 243 HV has been designed without a slope compensator and allows for the heaviest use with the highest degree of ...

    By Neuson Forest GmbH based in Linz, AUSTRIA.

  • Orion - Model 230 - 285 - Forest Tractors

    Tractor equipped with the engine of 227-286 HP, six cylinders, turbocharged, adhering to emission regulation EURO IIIB. Effective power control system. Semi-automatic Power Shuttle transmission and Power Shift, six gears with quadruple ratio under load with creeping gears reducer. Front axle traction control system. Electronic change of driving ...

    By Crystal Traktor Sp. z.o.o. based in Sieradz, POLAND. from Forest Tractors Product line

  • ORION - Model 130 - Forest Tractors

    Tractor equipped with the engine of 114 -143 HP, turbocharged with intercooler, adhering to emission regulation EURO IIIB. Semi-automatic transmission with creeping gears reducer. Electronic change of driving direction forward-backward. Main clutch – wet, multi disc. Lift controlled electronically by BOSCH. PTO shaft 540/ 750/1000/1400 rpm. ...

    By Crystal Traktor Sp. z.o.o. based in Sieradz, POLAND. from Forest Tractors Product line

  • ORION - Model 160 - 190 - Forest Tractors

    Tractor equipped with the engine of 158 - 193 HP, turbocharged with intercooler, adhering to emission regulation EURO IIIB. Semi-automatic Power Shuttle transmission, six gears with quadruple ratio under load with creeping gears reducer. Electronic change of driving direction forward-backward. Main clutch – wet, multi disc. Lift controlled ...

    By Crystal Traktor Sp. z.o.o. based in Sieradz, POLAND. from Forest Tractors Product line

  • Sampo-Rosenlew - Model 1066 - Harvesters

    The high-performance Sampo-Rosenlew 1066 is not only nimble, but also a strong and efficient log handler. This semi-heavy duty harvester is designed for thinning, but it can also handle final cutting with ease. By increasing the wheel spec, a three-metre width can be achieved, and the service weight can be increased from 13 tonnes up to 16 tonnes. ...

    By Sampo Rosenlew Ltd based in PORI FINLAND, FINLAND. from Forest Machines Product line

  • Sampo-Rosenlew - Model HR46 - Harvester

    The HR46 is the new workhorse for first thinning. Even more powerful than its predecessor 1046pro, the harvester now has a larger, 135cc pump, which facilitates operation at an engine speed reduced by a third. This change improves performance and reduces consumption, which translates to increased profitability of thinning operations for the ...

    By Sampo Rosenlew Ltd based in PORI FINLAND, FINLAND. from Forest Machines Product line

  • Sampo - Rosenlew - Model FR28 - Forwarders

    Sampo-Rosenlew has responded to customer demands by designing the FR28 forwarder, which is suited for thinning operations. This 10-tonne load bearing forwarder is designed to complement our harvesters.  With its low dead load and high steering angle, the F28 is a nimble machine for efficiently transporting timber from stump to roadside.

    By Sampo Rosenlew Ltd based in PORI FINLAND, FINLAND. from Forest Machines Product line

  • LOG - Swivelling Grading Blade

    These machines work in manual mode using a joystick or in automatic mode using a laser reference. In the latter case, guidance is assured either using a central laser receiver (elevation correction only), or using two side receivers installed on each side of the blade body (elevation and inclination correction). The hydraulic system is connected ...

    By Streumaster Maschinenbau GmbH based in Egglkofen, GERMANY. from Forest and Construction Equipments Product line

  • Sampo Rosenlew - Model HR46 - Forest Harvesters

    The HR46 is the new workhorse for first thinning. Even more powerful than its predecessor 1046pro, the harvester now has a larger, 135cc pump, which facilitates operation at an engine speed reduced by a third. This change improves performance and reduces consumption, which translates to increased profitability of thinning operations for the owner.

    By Farmer 2000 based in STARA ZAGORA, BULGARIA.

  • Forest Machines

    A combination of wood chips, chippings and bark that whirl around, hydraulic oil, fuel and high temperatures constitute a high fire risk area in the engine compartment in a forest machine. The fire’s course of event can be very fast and it can be very difficult to suppress with only a hand fire extinguisher. As the forest machines often work ...

    By Fogmaker International AB based in Växjö, SWEDEN.

  • Forest Machine

    The Forest Machine If you want to use the IronHorse for heavy forestry with the option of a powerful winch you should take a close look at the Pro models. This is a true workhorse – a product that delivers impressive performance. It shares the same basic design as the base model but is also equipped with timber bunk, restraining strap, ...

    By Lennartsfors AB based in ÅRJÄNG, SWEDEN. from The IronHorse Product line

  • Indexator - Model AV 14S - Hydraulic Rotator for Forest Harvesters

    Perfect weight and power ratio. Engineered specially for forest harvesters. Designed for heavy loads.

    By Hydracom SIA based in Dreilini, LATVIA. from Hydraulic Rotators - Indexator Rotators Product line

  • Indexator - Model AV 12S - Hydraulic Rotator

    Designed for professional forest treatment. Engineered specially for medium and large forest harvesters. Robust and durable.

    By Hydracom SIA based in Dreilini, LATVIA. from Hydraulic Rotators - Indexator Rotators Product line

  • Indexator - Model AV 17S - Hydraulic Rotator

    Designed for heavy loads and machines. Engineered specially for heavy forest harvesters. Durable and strong design.

    By Hydracom SIA based in Dreilini, LATVIA. from Hydraulic Rotators - Indexator Rotators Product line

  • Mantis - Clutivator

    World Famous. 21.2cc engine. Unique twisted tines. Accessories available. Weight just 9kgs.

    By New Forest Garden Machinery based in Hampshire, UNITED KINGDOM.

  • Feller Bunchers (Wheel)

    Prentice Wheel Feller Bunchers - Engineered for reliable performance in the most challenging forest conditions. The new Prentice C Series wheel feller bunchers raise the bar to lower your owning and operating costs by improving serviceability, performance, stability, agility, reliability and operator comfort.

    By Frank Martin Sons, Inc. based in Fort Kent Mills, MAINE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you