Furrow Planting Equipment In Europe
-
Manufactured by Egedal Maskinfabrik A/Sbased in DENMARK
Furrow Machine for making plant furrows for transplanting by hand. Variable furrow-depths and numbers. 3 different furrow widths. Rotation of shares by means of PTO shaft. Standard three-points ...
-
Manufactured by Lauwers n.v.based in BELGIUM
The new TML Transplanter has a very narrow plow, hardly wider than the trayplant itself. This plow makes a tight furrow so the plant is positionned straight upwards. The plant can also easily be pressed firmly by the wheels that are positionned very close to the plant. Heavy soil is no longer any problem. Inside the plow, a ...
-
Manufactured by Grimme Landmaschinenfabrik GmbH & Co. KGbased in GERMANY
The GL 32 E with 500 kg hopper is available for row width 75 or 90 cm. Ideal for smaller farms to start with, easy to operate and low-cost investment. Ideal for accurate and trouble-free planting. The furrow opener on a parallelogram for exact depth control are available as an option. Depending on the conditions ridging bodies behind ...
-
Manufactured by JSC Lidselmashbased in BELARUS
The 4-row automatic elevator-type mounted potato planter L-202 is intended for planting non-sprouted potatoes. The basic components of the machine are: carrying frame, driving ground wheels, planting devices, furrow openers, covering discs, bulk hopper and plant space rings adjustment gear. Potato planter is easily adjustable, ...
-
Manufactured by OZBIL AGRICULTURAL MACHINERYbased in TURKEY
The machine is connected to a tractor through a three-point hitch mechanism. The driveshaft is connected to the power take-off a tractor. Diving distance of the front cutter discs and depth of the carriage setting wheel are adjusted according to soil conditions. Planted furrows are cut by cutter discs and taken inside the machine by the ...
-
Manufactured by BASRIJS BVbased in NETHERLANDS
Suitable for dibbing planting holes in the ground, e.g. for leek. Basic versions: 3 rows at 37 to 50 cm or 4 rows at 75 cm or 5 rows at 60 cm. Dibbing distance in the row 8 to 30 cm, adjustable by exchanging chain wheel and/or selecting tractor gear. Dibber-hole diameter 30 mm. Capacity about 1200 meters per hour. Aptionally available: ...
-
Manufactured by BASRIJS BVbased in NETHERLANDS
Suitable for planting leek, both bare rooted and soil-blocks. Principle: Plant is right placed on supply belt. Plant is supplied right between the solid and rubber flexible disc. Plant is placed by the discs right into the furrow and loosen. Then the plant is well pressed by the pressing wheels ...
-
Manufactured by OZBIL AGRICULTURAL MACHINERYbased in TURKEY
The machine is connected to a tractor through a three-point hitch mechanism. The driveshaft is connected to the power take-off a tractor. Diving distance of the front cutter discs and depth of the carriage setting wheel are adjusted according to soil conditions. Planted furrows are cut by cutter discs and taken inside the machine by the ...
-
Manufactured by OZBIL AGRICULTURAL MACHINERYbased in TURKEY
The machine is connected to a tractor through a three-point hitch mechanism. The driveshaft is connected to the power take-off a tractor. Diving distance of the front cutter discs and depth of the carriage setting wheel are adjusted according to soil conditions. Planted furrows are cut by cutter discs and taken inside the machine by the ...
-
Manufactured by JSC Lidselmashbased in BELARUS
The 2-row automatic elevator-type mounted potato planter L-201 is intended for planting non-chitted potatoes on small plots. The basic component parts of the machine are: the carrying frame, driving ground wheels, planting devices, furrow openers, covering discs, a bulk hopper and the plant spacing adjustment gear. The machine ...
-
Manufactured by Team Sprayersbased in UNITED KINGDOM
The Team Compact on-planter range applies liquid formulations ‘in-furrow’ whilst planting, a tried and tested design ensures reliability and peace of mind throughout the planting season. A system working pressure of 5 bar reduces the risk of nozzle blocking, whilst maintaining the flow of solution and ensuring nozzle ...
-
Manufactured by Ferrari Costruzioni Meccanichebased in ITALY
The FERRARI FPC transplanting machine was developed to accomplish simultaneous operations in one pass. This transplanter can lay either polyethylene or biodegradable film to the ground, make holes through the mulch and transplant square block pots. The output is on average 5,000 plants per hour on every row. FPC can be either tractor ...
-
Manufactured by BASRIJS BVbased in NETHERLANDS
Suitable for planting soil-blocks of 4 to 5 cm. (lettuce, endive etc.). Principle: soil-blocks are transported by conveyer belts into the planting sock, glide into the furrow and are earthed up. Planting elements are fixed independ movable. Belts are driven at bottum side. Minimum distance between the rows 26,5 cm. ...
-
Manufactured by AVR bvbabased in BELGIUM
The Ceres 450 is a 4-row trailed potato planter with a hopper capacity of up to 3,500 kg (4x75 cm) or 4,000 kg (4x90 cm). Each individual potato row assembly can be disconnected manually (electrical also available as an option). The total wheel movement from left to right is 30° (+15°, -15°). The clever mechanical design ensures that the rotation axis always remains vertical, and that ...
-
Manufactured by WIFO-Anema BVbased in NETHERLANDS
From the hopper (1) the potatoes slide onto a wide conveyor belt (2), which carries them between the electronically controlled adjustable apertures (3), the bottom half of which is bent inwards. The potatoes then travel towards the two conical formed discs with a flat outer rim. Alongside the wide conveyor belt (2) there are two narrow conveyor belts(7), which are fed by the supply discs (4) ...
-
Manufactured by AVR bvbabased in BELGIUM
When cultivating potatoes, the preparation of the seed bed is crucial. A good soil structure ensures a good water management and temperature in the ridge, which in turn have a positive influence on the tuber setting and prevent tuber deformation. Also important: an optimal crumbling while planting is the first step towards a successful ...
-
by UPL Limitedbased in INDIA
The reduction of soil degradation and water conservation are the cornerstone of how UPL is working towards a more sustainable agricultural ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you