Furrow Equipment In Europe
-
Manufactured by ERMO S.p.A.based in ITALY
Reliability, on any field. Available in the mechanical or hydraulic version, the ERMO mounted ploughs are strong and efficient. They are built to weigh less and reduce consumption, and always live up to expectations as they are built with extremely resistant steel which allows for an exceptional firmness-weight ratio. The use of the strengthened bushings in the joining points facilitates the ...
-
Manufactured by Bordin Ettore & F. S.n.c.based in ITALY
On request: Dual cylinder head for two-bottom plough. Varying working depth for two-bottom plough. Rubber depth-control wheel with screw adjustment. Wheel for depth-control and road transit. Road transit ...
-
Manufactured by Egedal Maskinfabrik A/Sbased in DENMARK
Furrow Machine for making plant furrows for transplanting by hand. Variable furrow-depths and numbers. 3 different furrow widths. Rotation of shares by means of PTO shaft. Standard three-points ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
The integrated FixPack furrow press remains connected to the plough at all times. The press remains with the plough during road transport or on the headland saving valuable time. It can be used with three, four and five furrow mounted reversible ploughs with up to 2,5 m working ...
-
Manufactured by NRH Engineeringbased in UNITED KINGDOM
It is easy to pack the land as it is being ploughed because of the moisture content in the soil. Light and medium land can be drilled following the plough. Stronger land can effectively be worked down sealing the moisture, preventing baking and enabling the soil to be subsequently worked with the minimum of ...
-
Manufactured by Angeloni srlbased in ITALY
Drawbar on beam with adjustment by screw and with 360° hydraulic tipping. Variable working width by mechanical adjustment. Share bolt safety system on each mouldboard. Skimmer moulboard. Self locking swinging ...
-
Manufactured by LEMKEN GmbH & Co. KGbased in GERMANY
Plough press or as front furrow press, single- or double-row, with 700 mm or 900 mm ring diameter, with 30° or 45° ring profile, LEMKEN has the right solution for any ...
-
Manufactured by F.lli Marinelli s.r.l.based in ITALY
Three Furrow Plough with double croosbar movement. Wheeled tractor maximun from 120 to 200 hp. Available in the mechanic or hydraulic ...
-
Manufactured by Turan Agricultural Machines Industry and Trade Inc.based in TURKEY
are easy to configure and use. There is no need to make a furrow while using the reversible moldboard plough. The plough will turn straight back and not disrupt the land level at the same time it is fuel and time ...
-
Manufactured by Kotte Landtechnik GmbH & Co. KGbased in GERMANY
Twin-furrow press DPA 10/11-900 with a working width of 2,55 ...
-
Manufactured by Kotte Landtechnik GmbH & Co. KGbased in GERMANY
Front mounted furrow press FP 27-900 with a working width of 5,00 ...
-
Manufactured by Damax Srlbased in ITALY
Staffing standard folding Versions boottine, single disc and double disc: Single strength (double traction only for version Mt 4.00). Squeegee land wheel. Crank and bacl try seed. Harrow after the parallelogram with pressure adjustment. Small Tooth anti obstruction of the ...
-
Manufactured by Agroremproject -98 JSCobased in BULGARIA
This plough is designed for the implementation of pre-sowing and deep autumn ploughing, it is furnished with three-point ...
-
Manufactured by Aldo Biagioli & Figli srlbased in ITALY
Single furrow ploughs for tractors 30-100 HP. ...
-
Manufactured by Hibemabased in SPAIN
Single-furrows with chisel plows, easy maintenance and high clearance. Protected by fuse for screw hithc. Multiple regulations, cylindrical roof tiles. With height between tips from 90 to 160 cm. A work from 7 "to 18". The twirl is a double-acting ...
-
Manufactured by Mascar SpAbased in ITALY
Simple but strong, suitable for well-prepared soils. Low distributor element that, thanks to the shoe opener grants optimal seeding even on very hard soils, and in conditions of humidity. Furthermore, its strength and easiness foresee just minimum maintenance ...
-
Manufactured by Kotte Landtechnik GmbH & Co. KGbased in GERMANY
Front mounted furrow press FP 8-900 with a working width of 1,45 ...
-
Manufactured by Kotte Landtechnik GmbH & Co. KGbased in GERMANY
Front mounted furrow press FP 16-900 with a working width of 3,00 ...
-
Manufactured by Agriway srlbased in ITALY
Standard equipment: Cylindrical mouldboards and chisel points. Headstock with oscillating bar hitch. Shear bolt safety device. Mechanical first furrow ...
-
Manufactured by Ünlü Ziraat Aletleri A.Ş.based in TURKEY
CODE:CKDH20081695,DESCRIPTION:8 FURROWS 16",BEAM DISTANCE:350,WEIGHT(kg):,WORKING WIDTH(mm):2400-4000,FRAME CLEARANCE(mm):750,POWER(HP):220-260,WORKIN DEPTH(mm):350 - 400. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you