Only show results available in Virginia? Ok

garlic Equipment

  • Binder - 1 Rows Harvester

    Dragged machine hooked to the three points of the tractor. The boot of the garlic is done through a bar that raises the garlic, and straps rise up while a few vibrators clean the mud and make it reach the lashering, which ties them up in packages. Once tied, the package is perfectly standing on the floor.

    By Maquinaria Zocapi S.L. based in Las Pedroñeras, Cuenca, SPAIN. from Garlic Product line

  • Zocapi - Model D - Garlic Splitter

    Static machine composed by a hopper (500 kg approx.) 2 adjustable bands splitter module, seven alternating rotary brushers and direct aspiration system, selection band and a seed sorter with vibration system and 5 different grades.

    By Maquinaria Zocapi S.L. based in Las Pedroñeras, Cuenca, SPAIN. from Garlic Product line

  • Zocapi - Model CZ - Havesting Cutter

    Machine carried by a 3 point linkage. Up to 5 rows, when the harvester machine pick the garlic up, it comes to this part where the head is cut from the stem and all the heads go on a conveyor until the packing (sac, box, Ö) Besides, the stem continues until the end until it slip down to the floor.

    By Maquinaria Zocapi S.L. based in Las Pedroñeras, Cuenca, SPAIN. from Garlic Product line

  • Zocapi - Model CLZ - Sorter Static Machine

    Static machine for classifying garlic with food PVC bands. They are from 2 to 8 outputs. Is trafficking in a cascade system in which the bands range from minor to major so that the garlic passes through the chosen diameter and belts put them in boxes or pallets already classified by sizes. The diameters are to choose.

    By Maquinaria Zocapi S.L. based in Las Pedroñeras, Cuenca, SPAIN. from Garlic Product line

  • Zocapi - Sprayer Machine

    Static machine for chemical application before planting. Optionally a turbine for extraction of impurities can be placed.

    By Maquinaria Zocapi S.L. based in Las Pedroñeras, Cuenca, SPAIN. from Garlic Product line

  • Zocapi - Model PM - Planter

    Machine suspended by the three points of the tractor. Transmission by two-wheel drive adjustable in height, with an excellent performance even in extreme conditions, as well as ensuring a high uniformity of planting. It offers the possibility of adjusting the separation between the seeds from 6 to 15 cm. using a simple sprocket change operation. ...

    By Maquinaria Zocapi S.L. based in Las Pedroñeras, Cuenca, SPAIN. from Garlic Product line

  • Binder - Model ZF2 - 2 Rows Harvester

    Dragged machine hooked to the three points of the tractor. The boot of the garlic is done through a bar that raises the garlic, and straps rise up while a few vibrators clean the mud and make it reach the lashering, which ties them up in packages. Once tied, the package is perfectly standing on the floor.

    By Maquinaria Zocapi S.L. based in Las Pedroñeras, Cuenca, SPAIN. from Garlic Product line

  • Garlic

    With Garlic oil to help reduce fly and tick problems in your stock. Costs just 3 cent/day.

    By Uniblock based in County Louth, IRELAND.

  • Top Air Topper Loader

    The Top Air Topper Loader Series of harvesters is currently state of the art in the onion industry. This “One Step” method is considered by many in the industry to be the best and most efficient way to harvest onions. University studies have shown improved storage quality as a result of letting the onions dry naturally and handling ...

    By Top Air Incorporated based in Parma, IDAHO (USA). from Garlic Equipment Product line

  • Model NC500 - Garlic Cleaner-Grader

    Motor power rating: 0.25 kw. Voltage : 220/380v trifásica. Production : 400kg/h

    By ERME s.a.s based in Montégut-Arros, FRANCE. from Garlic Cleaner Product line

  • Model C630 - Garlic Grader

    Motor power rating: 0.25 kW. Voltage : 220/380 V three-phased. Production : 500 kg/h.

    By ERME s.a.s based in Montégut-Arros, FRANCE. from Garlic Grader Product line

  • Model E150 - Small Garlic Splitter

    A hopper with a slatted conveyor belt feeds the machine. The garlic bulbs are split into bulblets between two belts, the distance between the belts can be adjusted.A suction extractor removes the skins after splitting. There is a belt enabling manual finishing. 6 rubber fingers complete the splitting operation. A suction extractor remove the skins ...

    By ERME s.a.s based in Montégut-Arros, FRANCE. from Garlic Splitter Product line

  • Model E600 - Big Garlic Splitter

    A hopper with a slatted conveyor belt feeds the machine. The garlic bulbs are split into bulblets between two belts, the distance between the belts can be adjusted. 7 alternating rotary brushes complete the splitting operation. A suction extractor removes the skins after splitting. There is a belt enabling manual finishing.

    By ERME s.a.s based in Montégut-Arros, FRANCE. from Garlic Splitter Product line

  • Garlic Digger

    Diggers can lift garlic, onions and root vegetables. Its share lift the plants from rows. Then they can be easily pulled out and stored off the rows. Share can be adjusted for the row span from 350 to 550 mm. 1-6 share can be instaled on the frame. Hydraulic digger is guided on line service, so as to avoid the damage of plants. The maximum working ...

    By N.O.P.O.Z.M. s.r.o. based in Slatiňany, CZECH REPUBLIC. from Agricultural Machines Product line

  • Binder - Model ARAT-1 - Garlic Harvesters

    The garlic harvester-binder removes the bulbs of garlic from the soil, eliminating part of the soil, maintaining the leaves for greaterpreservation and grouping the harvest together to make collection easier.

    By J.J.Broch, S.L based in Arganda del Rey, SPAIN. from Garlic Crop Machinery Product line

  • Garlic Splitter

    The separation and classification of the cloves is the first step for a uniform, regular plantation. High work output allows for theamount shelled to be adapted to the rhythm of the plantation.

    By J.J.Broch, S.L based in Arganda del Rey, SPAIN. from Garlic Crop Machinery Product line

  • CLASIF - Garlic Grader

    Gentle and precise grading at high performance. A consistent size improve the crop profit. The modular grader JJ Broch can be adapted as number of sizes as needed to optimize the crop marketing.

    By J.J.Broch, S.L based in Arganda del Rey, SPAIN. from Post Harvest Garlic Crop Equipment Product line

  • Model ARCO-1 - Garlic Harvester Cutter

    The harvester-cutters remove the bulb from the soil, remove part of the soil and cut the leaves, storing the bulbs in boxes or sacks of different sizes.

    By J.J.Broch, S.L based in Arganda del Rey, SPAIN. from Garlic Crop Machinery Product line

  • Model PLMA-2 - Garlic Planters

    The garlic planters collect and position the garlic bulblets without damaging at the depth and dosage required. Their great  efficiency, low maintenance and easy of use makes them a vital tool for any garlic producer.

    By J.J.Broch, S.L based in Arganda del Rey, SPAIN. from Garlic Crop Machinery Product line

  • NECi - Model E-GP - Garlic Press

    Plant Sample Prep Made Easy; Features : Aluminum, Includes Cleaning Tool.Suggested for use with our:Plant Nitrate Test Kit Green Forage Nitrate Test Kit

    By NECi Superior Enzymes based in Lake Linden, MICHIGAN (USA). from Equipment and Supplies Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you