Grain Cart Equipment
-
Manufactured by WICbased in CANADA
Painted steel bin. 2 pneumatic 16'' wheels (40cm). 1 or 2 optional swivelling wheels. 13 bushels capacity : (16.7pi3 - ,47 m3). Dimensions of the bin : 56''x25''x22'' (140 x 63 x 55 cm). Weight: 146 lbs (66 ...
-
Manufactured by Perardbased in FRANCE
The Interbenne is designed to optimize harvesting while limiting compaction. Its high output means a time saving of more than 25% by eliminating emptying when stationary. Its large capacity means it can fill a semi-trailer very ...
-
Manufactured by Perardbased in FRANCE
The X-Flow is a purely crop-oriented travelling platform. Its 600-mm screw for 28 and 34 m³ makes it one of the most efficient machines on the market for these capacities. It can fill lorries or large trailers at the ends of fields while following as much as two large combine ...
-
Manufactured by CrustBuster/Speed King, Inc.based in USA
More capacity and faster unloading speeds make the new CrustBuster / Speed King Inc. Grain Cart an essential part of harvest operations. Equipped with a 22" computer balanced auger with 5/16" flighting, the unloading speed is 50% faster than smaller grain carts with 18" or smaller augers. The 1325 auger is equipped with a ...
-
Manufactured by Perardbased in FRANCE
The X-Flow 15 and 19 models are designed to accept the total capacity of the hopper on the largest combine harvesters that can then be immediately transferred. They are easy to use, have limited weight and are cheap to operate, which makes them essential tools for all optimized harvesting operations. They enable combine harvester productivity to be maximised by transferring on the move, while ...
-
Manufactured by AKRONbased in ARGENTINA
Easy operation with its new and compact design. Minimum turning radius. Great unloading Speed: 10,000 and 13,000 Kg / minute (according to model). Great loading capacity assured by AKRON: 37,000 liters / 31,000 liters / 29,000 liters. Unloading tube: 500 and 600 mm diameter (according to model). Sliding bottom doors that speed-up and/or interrupt the unloading process and facilitate cleaning. ...
-
Manufactured by Shur-Co, LLCbased in USA
The smoothest move in tarping - from open to closed, simply and easily! Spring-loaded tension with cable attachment keeps your tarp tight, even in moderate wind conditions. An extruded tarp attachment slot runs the full length of the aluminum roll tube. Once the tarp is inserted, a safety rod anchors it in place, making for easy tarp removal down the road. A reinforced, non-collapsible flexible ...
-
Manufactured by CrustBuster/Speed King, Inc.based in USA
Choice of red or green paint. Computer balanced 8' auger. Lower profile. Front corner auger for great driver visibility. Gear box consists of two-piece housing, large gears, and extra support bearing. Adjustable axle. Lower drive bushing with stainless steel insert. Heavy main frame tubing. Deluxe light kit. Swivel ...
-
Manufactured by Perardbased in FRANCE
The Interbenne 46 is equipped with a Ø 700 mm plunger auger and Ø 600 mm swivel part making it possible to obtain a record-breaking discharge rate of approximately 1 minute for 46 m³ without any risk of compressing and therefore breaking the ...
-
Manufactured by Michels Industries Ltd.based in CANADA
) are standard with all grain cart systems. Optional Flip Release tarp stops with a 3' or 6' offset are ...
-
Manufactured by Perardbased in FRANCE
The Interbenne is designed to optimize harvesting sites while limiting compaction. Its high flow rate saves more than 25% of time by eliminating all oil changes when ...
-
Distributed by Carlson Equipmentbased in USA
A&L Grain Cart, Reconditioned ...
-
Manufactured by Chioda Daniele & C. S.n.C.based in ITALY
Chioda Daniele & C S.N.C produce and sells a range of Hopper wagon / Grain cart for the transport of different cereals, granular fertilizer. Models start from 19 cubic meter to ...
-
Manufactured by Grain Saverbased in SWEDEN
GS-24,5 is a powerful grain cart, adapted to serve one to two medium/large combines in operation. It is easy to drive and operate. Grain cart GS-24,5 works well with a tractor at approximately 200-250 hp. With such a tractor, slopes and gradients will not set down the driving speed, making it smooth for the grain ...
-
Manufactured by Agri-Products, Inc.based in USA
We have 12 gauge steel extensions to fit any Kinze grain cart from the 640 through 1050 models. Available in 4- or 3-sided designs. 10" tall extension. Powder coat painted in "Kinze blue". All models are roll tarp friendly. Crated in 1/2" plywood to avoid any freight ...
-
Manufactured by Teamcobased in CANADA
21’ long dump box placed on a 4 wheel frame (20’ lg), having a 30 metric ton ...
-
Manufactured by Walsh & Fordbased in AUSTRALIA
We have been manufacturing Chaser / Grain Carts from 1990. Proven quality and value for money are standard with all our Chaser / Grain Carts. Sizes range from 10T up to 30T capacities. Walsh and Ford have been manufacturing Chaser / Grain Cart from 1990 onwards gaining a reputation for quality, ...
-
Manufactured by Vesta S.A.based in ARGENTINA
Installed on 2 axle Grain Carts with springs. Easy to operate, with simples functions by keypad. Memory: Quantity of operations and Total accumulated weight. Connection to a Printer or PC (optional) and Printer ...
-
Manufactured by Grain Saverbased in SWEDEN
NEW! GS-38 is a large and powerful grain cart, adapted to serve one to two 35-50’’ combines in operation. It is easy to drive and operate. GS-38 is our top performing grain cart with a complete new design. Emptying this powerful grain cart in the bottom is done in less than 40 ...
-
Manufactured by Central City Scale, Inc.based in USA
When time and efficiency count the most, a Grain Cart Scale system is the perfect field hand. During the rush of harvest, every minute and every bushel counts. That’s where a grain cart scale from Central City Scale can make a real difference. With a typical accuracy of ½ of 1%, our grain ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you