Only show results available in Virginia? Ok

grain inspection Equipment

  • Flat Bottom Silo

    Flat Bottom Silo made high strength steel S350GD, fully galvanized Z-600 (600 gr/m2) with vertical and externally bolted reinforcements. Completely bolted joints with 8.8 bichromated bolts and nuts with rubber washers INCLUDED. Preformed butyl mastic (BSD) to seal connections panels INCLUDED. Fixing plates with fixing bolt/plug to the ground ...

    By Storage Project Solutions S.L. (SPS) based in Campillos (Málaga), SPAIN. from Grain Storage Product line

  • Grain Dryer

    Hands on technical dryer service training.Experienced technical support.Parts available in 6 strategically located warehouses.Dedicated to customer satisfaction.Each dryer section factory tested.Comprehensive 8- step NECO quality assurance inspection

    By Global Industries, Incorporated based in Grand Island, NEBRASKA (USA). from Grain Dryers Product line

  • Bucket Elevators

    Our exclusive low-profile head is designed to minimize breakage-causing impact points. Components are manufactured to precise standards from heavy gauge materials to provide easy installation and strength. And Chief bucket elevators are designed for convenience with urethane liners, easy-open hinged discharge inspection doors, and head hood slide ...

    By Chief Industries, Inc. based in Grand Island, NEBRASKA (USA). from Grain Handling Product line

  • Grain Silos

    Capacity from 30 to 150 tons. Conical hopper forming the silo bottom. Double shell of zinc coated sheet, covered with protective coating. Roof with ventilator and inspection opening. Aeration pipe allowing drying up of humid grain. No housing and/or roofing required. Offered separately or in a process line. Possibility to protect against ...

    By Zuptor Sp.z o.o. Ltd based in Gostyń, POLAND. from Grain Storage Product line

  • Grain Storage

    Jansen & Heuning offers a great choice of products for grain storage. In addition, Jansen & Heuning can provide a variety of supporting equipment. These include installations for loading, drying, aeration and conveying of grain.

    By Jansen & Heuning based in Groningen, NETHERLANDS. from Grain Processing Product line

  • Hopper Bottom Silos

    Hopper bottom silo made of high strength steel S350GD, fully galvanized Z-600 (600 gr/m2) with vertical and externally bolted reinforcements.

    By Storage Project Solutions S.L. (SPS) based in Campillos (Málaga), SPAIN. from Grain Storage Product line

  • SCAFCO - Farm Grain Bins and Silos

    Perfect for on-farm applications and small silos, SCAFCO's farm bins and silos range from 12' to 48' (3.66 m to 14.63 m) in diameter. Our steel sheets are pre-punched in a single-stroke operation assuring accurate hole alignment and uniform fit. In addition, SCAFCO's unique 42 and 2/3' (1.08 m) galvanized steel sheets have a 2 and 2/3' pitch and ...

    By SCAFCO Grain Systems Co. based in Spokane, WASHINGTON (USA). from Grain Systems Product line

  • Chief - Model CB12 - Commercial Bins

    Offering more roof options – including peak load capacity of up to 50,000 lbs. (22,680 kg) on Chief’s larger bins! Chief offers a wide range of standard and optional roofs to meet your desired peak load capacity for your specific operation and handle snow loads for your geographic location.  Included is the optional 50K roof which ...

    By Chief Industries, Inc. based in Grand Island, NEBRASKA (USA). from Grain Storage Product line

  • Seedburo - Filling Hopper and Stand

    Meets the specifications of the USDA-FGIS (GIPSA) for official inspection. The filling hopper is heavy gauge brass spinning with a slide gate valve for instant release of grain. The opening is a standard 1 1/4' diameter. Adjustment of the hopper can be made to the proper 2 inch height above any cup.

    By GSF / Ag STAR based in Sully, IOWA (USA). from Grain Grading Equipment Product line

  • Model 4800 - Bushel Hopper Bin

    Wide 4' corrugation. G115 Galvanizing. Standard ladder package. Standard inspection hole. Stiffened and unstiffened bin models available (See product details).

    By DARMANI based in Fiske, SASKATCHEWAN (CANADA). from Hopper Mount Grain Bins Product line

  • Model 5556 - Bushel Hopper Bin

    Wide 4' corrugation. G115 Galvanizing. Standard ladder package. Standard inspection hole. Stiffened and unstiffened bin models available (See product details).

    By DARMANI based in Fiske, SASKATCHEWAN (CANADA). from Hopper Mount Grain Bins Product line

  • Dan-Corn - Hopper Bins

    Designed and manufactured in the USA. Bin diameter from 4.57 to 6.40 m. Bin capacities from 59 to 214.5 tons of wheat. Volume from 78 to 282 m3 with 45° cone shaped hopper. Strong Roller-Gate outlet slide. Galvanised legs bolted to two silo rings. External ladder with safety cage. Roof ladder to the top of the silo. 32° silo roof with ...

    By DAN-CORN A/S based in Hedensted, DENMARK. from Steel Grain Bins Product line

  • Manac - Grain Hoppers

    Front ladder and catwalk. Allows the driver to inspect the load. Welded Tarp bows with full length ridgepole. Reduces tarp from sagging. Butterfly door crank. 33 and 44 degree floor slopes. Easy unloading.

    By Manac inc based in Saint-Georges, QUEBEC (CANADA). from Agricultural Product line

  • Dan-Corn - Steel Grain Bins

    Big inlet with lid at the top of the bins. Roof ladder with railing and non-skid steps. Resin anchor foundation bolts. Flexible sealant between bin and foundation. Large external access door fitted with safety device. Large external ladder with safety cage or spiral staircase. Internal inspection ladder. Large roof manhole with safety railing. ...

    By DAN-CORN A/S based in Hedensted, DENMARK. from Steel Grain Bins Product line

  • A.R.K. - Pneumatic Conveyers

    Pneumatic conveying may be defined as a continuous and flexible transporting method for dry bulk particles through a pipeline by either a negative (suction) or a positive (blowing) pressure air stream. Basically it consists of a tubing system in which a granular product is carried. Suction systems are commonly used for the recovery of products ...

    By A.R.K New-Tech Ltd. based in Manitou, MANITOBA (CANADA). from Grain Handling and Drying Product line

  • Goebel Flat Bottom Bins

    Goebel Grain Bins are built by Prairie Steel Products. All bin components for Hopper Bins and Flat Bottom Bins are built in one manufacturing facility located in Clavet, Sask. Goebel Bins are built as matching packages that provide the optimum in strength, durability and reliability at an exceptional value.  The manufacturing facility ...

    By Farm West Ag Ltd based in Regina, SASKATCHEWAN (CANADA). from Goebel Grain Bins Product line

  • MCi Kicker - Dockage Tester

    The MCi Kicker is a mechanical dockage tester used by grain handlers to determine dockage and foreign material, and should be operated in line with GIPSA/FGIS commercial guidelines The MCi Kicker is designed to provide a fast, accurate and consistent way of obtaining the following separations from most grains: shrunken & broken, overs/scalped ...

    By GSF / Ag STAR based in Sully, IOWA (USA). from Grain Grading Equipment Product line

  • Model N - Seed Separator

    Separator model N to sort seeds by aspirating on specific weight in a vertical air column, directly behind the vibratory feeder. Open system combining relatively high capacity and easy access, resulting in high efficiency (samples per hour). Because of the precise construction and the smooth finish, the N model is practically self cleaning, and ...

    By Agratechniek b.v based in Anna Paulowna, NETHERLANDS. from Seed and Grain-Vegetable Seed Product line

  • Grain Trailer

    Redrock trailers are designed and built to operate in the most demanding of agricultural environments. Superior design techniques are applied to all aspects of the trailers from a strong and stable chassis to the tough, modern body. Grain and silage trailers range from 10.5 tonnes to 20 tonnes in capacity. All trailers are fitted as standard with ...

    By Redrock Machinery Ltd based in Collone, NORTHERN IRELAND. from Agricultural Trailers Product line

  • Model QM/6 - Entry Level Monocoque Trailer

    The Marshall QM/6 is the entry level monocoque trailer in our range, but still has the same build and level of engineering that goes into all our trailers. The construction of the body is extremely robust, with 3.5mm sides and a 5mm flat floor ensuring the trailer can handle demanding work. The flat floor also prevents premature rusting of the ...

    By Charles J Marshall (Aberdeen) Ltd based in Aberdeen, UNITED KINGDOM. from Silage / Grain Trailers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you