Harrow Equipment Near Gambia
-
Manufactured by Joperbased in PORTUGAL
. Harrow indicated for working at hard grounds with ...
-
Manufactured by Joperbased in PORTUGAL
Link pins with 3 points cat. II. Mechanically (M), or hydraulically (H) extensible chassis, allowing to change the working width. High resistance chassis, made in steel tube 80 x 80 mm. Distance between rows - 70 ...
-
Manufactured by Solano Horizonte S.L.based in SPAIN
6.000-litre hopper, with access platform and riddle. Hydraulic support of the tow bar. Adjustable hitching ring. Rear arc structure with 3 points to hitch the sowing train. Box with auxiliar hydraulic and 12 V electrical plugs. Rear working lights. Central wheels with low pressure tyres 550/60 R22,5″. Trace erasers with adjusting of separation and ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Eccentric turning drawbar; Hydr. Opening/closing with adjustment of disc attack angle; Wheel-gear operated by hydr. cyl.; Structural tube frames (250 x 100 x 8 mm (22 to 32 disc) and 250 x 100 x 10 mm (34 to 36 discs)); Sequential system of disc gangs opening/closing; Rotary steel shaft 40 mm square; 260 mm spacing between discs; Adjustable disc Scrapers; 2 wheels 10.0/ 75 - 15.3 14 PR; Working ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Offset disc harrows ('V' type), mounted; Working angle adjustable by padlock; Side-hitch with adjustable length; Adjustable disc scrapers; Plain indented discs; 180 mm spacing between discs; Self-lubricated ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Offset harrows ('V' type), trailed; Front indented discs and rear plain discs; Hydraulic-adjusted working angle; Self-lubricated bearing; Stand-contained disc gangs; Adjustable disc scrapers; Adjustable dawbar for traction /transport; Disc shafts made of square 40 mm steel; 260 mm spacing between discs; Wheels 10.0/75-15.3; Rear electric ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Offset harrows ('V' type), mounted; Tie rod with adjustable length; Adjustable disc scrapers; Lubricated bearings; Rotary steel shaft: 28 mm square; Plain discs / cut-away; 230 mm space between discs; Automatic coupling on models (HRM 18 and HRM ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Offset harrow (“V” type); Front indented discs and rear plain discs thickness 6mm or 8mm; Hyd. adjustable working angle of discs; Lubricated bearings; Adjustable disc scrapers; Tie rod with adjustable double spring; Wheel-gear operated by hyd. cylinder; Structural tube frames; Rotary steel shaft 40 mm square; 235 mm spacing ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Sturdy built. Mounted on hydraulic tool carrier. Lubrificated bearings with tapered roller bearings and double leak-tightness. Disc shaft in heat-treated steel - 40 mm square. Indented discs - 8 mm ...
-
Manufactured by HERCULANO Alfaias Agrícolas, SAbased in PORTUGAL
Heavy offset disc harrow ('V' type); Hydraulic opening / close; Hydraulic disc gang levelling; Tie rod with adjustable double spring; Wheel-gear operated by hyd. cyl.; Structural tube frames Indented/plain discs - thickness 8mm; 235/ 260 mm spacing between discs Hydraulic brake; Transport width: 2,55m; 2 wheels 400/ 60 - 15,5(14) (HVRP 28/36); ...
-
Manufactured by Hibemabased in SPAIN
Standard Equipment: Frame 80x80 mm, Arm 30x30 mm (reinforced), Ctos of steel forged with spring protection, Elements of wear nylon bushed, Adjusting spring pressure, quick Hitch, AVAILABLE MODELS REDUCED ...
-
Manufactured by Hibemabased in SPAIN
Standard equipment: 80x80mm chassis, Arms 32x32 mm (Reinforced), Nylon Bushed Wear Elements, Spring pressure regulation, Quick hitch, REDUCED MODELS AVAILABLE. Accessories: Rollers 400 mm, Forged steel ctos with spring protection, Double row springs or blades harrows, Manual or hydraulic folding, Digger grate or ...
-
Manufactured by Vigerm, S.L.based in SPAIN
Standard equipment: The fixed models have a Ø 320mm roller made of Ø 25mm rea. The folding models have a Ø 380mm roller made of Ø 25mm rea. Reinforced chassis: 120x60x6 bars. Reinforced in the more exposed areas. Roller with sealed bushings. Cat. II-III hitch with fixed mouth. Arm assembly mounted with nylon bushings. Robust hydraulic equipment, requires no fastening ...
-
Manufactured by Vigerm, S.L.based in SPAIN
27cm distance between arms. Ø 380mm roller with bushings and made of Ø 25mm rea. Drag harrow with 10mm spikes. Shooting height - 480mm. It allows for working at different pressures depending on the hardness of the ground (hydro-pneumatic model). The highlight is its great shooting capacity that can reach a maximum height of ...
-
Manufactured by Vigerm, S.L.based in SPAIN
27cm distance between arms. Ø 380mm roller with bushings and made of Ø 25mm rea. Drag harrow with 10mm spikes. Shooting height - 480mm. It allows for working at different pressures depending on the hardness of the ground (hydro-pneumatic model). The highlight is its great shooting capacity that can reach a maximum height of ...
-
Manufactured by Julio Gil Águeda e Hijos, S.A.based in SPAIN
Drills pneumatic planter, hydraulic folding frame for transport into three articulated to copy the field. With harrow tines, large capacity volume distributor, track eradicators spring, planting override manual, light kit and hydraulic markers independent bowlers. Independent dispensing system for seed and fertilizer, starting with ...
-
Manufactured by Julio Gil Águeda e Hijos, S.A.based in SPAIN
Trailed pneumatic seeder to Drills, hydraulic folding frame for transport, into three sections to copy the field. Large hopper capacity of 6,000 l; volumetric pneumatic distributor high capacity, hydraulic fan drive through the cardan pump with separate oil tank; drive by electric motor dealer; console for managing all electrical and hydraulic system train sowing rear linkage for coupling of ...
-
Manufactured by Julio Gil Águeda e Hijos, S.A.based in SPAIN
Neumatic seed-drill, hydraulic folding frame for transport, into three sections to copy the field. With harrow tines, large capacity volumetric distributor, track eradicators spring, sowing manual override, lights kit and hydraulic markers. Seed-drill in three rows with depth control at the central body, it’s possible to put three ...
-
Manufactured by Horpiso Maquinaria Agrícolabased in SPAIN
The vibrocultivator is the latest generation cultivator equipped with special leaf springs and arms that vibrate as they pass through the soil. It is the machine that modern agriculture requires to work the land with maximum performance and at minimum ...
-
Manufactured by Horpiso Maquinaria Agrícolabased in SPAIN
Horpiso 4-row grating with 45x12cm arm with ballestin, two screws in grate, mounted with independent knee and harrow, for optimal soil ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you