Harrow Equipment Near Washington
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
Case IH True-Tandem 375 disk harrows, with working widths of 22 to 47 feet, deliver maximum pass coverage, durability and low maintenance with agronomically sound design ...
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
Case IH True-Tandem 345 disk harrows, with working widths of 22 to 47 feet, provide straight, easy pulling for primary tillage, seedbed preparation or chemical ...
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
True-Tandem 370 all-purpose tandem disk. Built on a frame that is even more rugged than that of the 340 – and loaded with many of the same productivity-boosting features – the True-Tandem 370 is specially equipped for dryland and heavy residue management applications. Even the toughest soil and residue conditions are no match for this ...
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
Working widths from 22 - 47 feet: Tough field conditions call for tough tillage tools. Case IH True-Tandem™ Disk Harrows lead the industry in ruggedness and reliability so you can manage heavy crop residue with ...
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
Case IH Heavy-Offset 790 offset disk harrows perform a wide array of soil-conditioning tasks with tough, long-lasting components. Two models are available, providing a range of disk blade width and spacing ...
-
Manufactured by Case IH - a division of CNH Globalbased in UNITED KINGDOM
The True-Tandem 340 is available in working widths ranging from 18 ft. 8 in. to 34 ft. 1 in. (5.7 to 10.4 m), and it can be used in the Spring or Fall for seed bed and crop residue ...
-
Manufactured by Landini, McCormick and Valpadana, brands by Argo Tractors S.p.A.based in ITALY
The Alpine series completes the new Landini tractor range with a powerful, lightweight and versatile tractor designed to meet the demand for high productivity in the low-power range (69,5 to 81 HP ISO). The Alpine series comes in two versions - Standard and GT - and in a choice of 4 four-wheel drive models - 70, 80 and 85. The Alpine STD version features drop-down final drives and a ...
-
Distributed by BCS Americabased in USA
Now Available: The 26" PDR! Just like the 30" version, the new 26" PDR is available pre-assembled on a brand new 26" Tiller or as an accessory to be installed on your existing 26" Tiller. ...
-
Manufactured by Standen Engineering Ltdbased in UNITED KINGDOM
Imants are specialist in soil fumigation and biofumigation ...
-
Manufactured by Behlen Country - a division of Behlen Mfg. Co.based in USA
The Behlen Country Drag Harrow is built with heavy 1/2″ x 4″ tines and heavy seamless draw bar. They can be easily reversed to allow for less aggressive leveling. Some of the more common uses are: leveling riding arenas, preparing seed beds, reconditioning driveways, incorporating broadcast seeds, spreading manure in ...
-
Manufactured by Behlen Country - a division of Behlen Mfg. Co.based in USA
The Behlen Country Drag Harrow is built with heavy 1/2″ x 4″ tines and heavy seamless draw bar. They can be easily reversed to allow for less aggressive leveling. Some of the more common uses are: leveling riding arenas, preparing seed beds, reconditioning driveways, incorporating broadcast seeds, spreading manure in ...
-
Manufactured by Behlen Country - a division of Behlen Mfg. Co.based in USA
The Behlen Country Drag Harrow is built with heavy 1/2″ x 4″ tines and heavy seamless draw bar. They can be easily reversed to allow for less aggressive leveling. Some of the more common uses are: leveling riding arenas, preparing seed beds, reconditioning driveways, incorporating broadcast seeds, spreading manure in ...
-
Manufactured by Kress Umweltschonende Landtechnik GmbH (K.U.L.T.)based in GERMANY
Because harrowing is not always harrowing, KRESS & CO remembers the forerunner of all harrows - the Flexible Tine Harrow, which is manufactured equal to the „System Schöneberger“ ,with working widths from 1,5 – 12 m. The critical factor to receive a good working success is the right way of „blind- ...
-
Manufactured by Kress Umweltschonende Landtechnik GmbH (K.U.L.T.)based in GERMANY
Drag harrows can be used for weed control in crops such as potatoes and cereals, or for seed bed preparation. The frame width can vary between 1.4 to 12.8 metres. The bigger frames can be folded back to 3 metres for road transport, either hydraulically or manually. The tines come in different shapes and ...
-
Manufactured by Imants BVbased in NETHERLANDS
Spading and subsoiling in a single operation!. Out in the field, there is a need for a cultivator that can easily be combined with a spader at low cost and with less tractive force. It has been found in practice that compaction occurs deeper than the surface soil under some conditions. You want to break up this often poorer subsoil but not to mix the surface soil. It is important to create ...
-
Manufactured by Imants BVbased in NETHERLANDS
A totally new concept in rotary spading machines for sandy and light clay soils. The 48SX machine is faster, lighter and stronger than its predecessor. The latest changes means spading becomes even more attractive as the machine is also equipped with a seedbed preparator. Simultaneous primary and secondary tillage. In combination with a drill or a planter cost reductions are even ...
-
Manufactured by Imants BVbased in NETHERLANDS
L or light duty model, works down to 12”, available only in 4 foot working width. This model is intended for tractors under 30hp and for working greenhouse or garden-type soils (no rocks or heavy clay). Average working speed 0.5mph, operates on 540PTO, delivered with or without power ...
-
Manufactured by KUHN S.A.based in FRANCE
In sizes from 18' to 34', the Kuhn Kruase 7300 Flex Wing Tandem Disc Harrow offers a wide range of standard and optional equipment choices to match the specific tillage needs of your farm. Kuhn Krause 7300 Rock-Flex model discs feature C-Flex type bearing arms to 'flex' over stones and other obstacles. The 7300 cuts, sizes, and mixes ...
-
Manufactured by KUHN S.A.based in FRANCE
Soil loosener can be combined for work with power harrows or power tillers or solo with a roller - chassis of triangular design for an excellent weight/robustness ratio - Central working depth adjustment - rear offset of only 45 cm - symmetrical shares with special angles to evenly break up soil and lift up over the whole working width - ...
-
Manufactured by Ringo Hill Farm Equip. Co., Inc.based in USA
Medium Duty 20 Blade Tillage Disc This hard worker is just big enough for the small farmer and just small enough for the home garden. This medium-duty disc makes planting the garden a pleasure. Features include a heavy-duty welded angle-iron frame, 10-18' x 3mm notched blades, 10-18' x 3mm smooth blades for better tillage, and heavy-duty sealed bearings. This hard worker breaks up 6-1/2' of soil ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you