Only show results in Virginia? Ok

Harvest Data equipment

  • Geringhoff - Model Harvest Star - Grain Head

    The Harvest Star* grain table sets the benchmark for grain tables folding technology. Its sophisticated coupling system is the result of focused development and reflects the cutting-edge technology applied throughout the entire head. The reel, cutterbar, auger, and transmission shaft couplings are fully automatic and self-tightening. Even in ...

    By Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG based in Ahlen, GERMANY. from Grain Heads Product line

  • Harvest Automation - Model HV-100 - Robotics Innovators

    Harvest Automation's flagship product is designed to perform material handling tasks in unstructured, outdoor environments such as those typically found in commercial growing operations. The robots work safely alongside people and require minimal training to operate, while vastly reducing production costs and improving productivity. The HV-100 ...

    By Harvest Automation, Inc. based in Billerica, MASSACHUSETTS (USA).

  • Golden Harvest - Model GH-27 - Tapered-Wedge Aluminum Gates

    This section covers Wedged Aluminum Gates and Operators. The equipment provided under this section shall be fabricated, assembled, erected, and placed in proper operating condition in full conformity with the drawings, specifications, engineering data, instructions and recommendations of the equipment manufacturer. Gates and operators shall be ...

    By Golden Harvest, Inc. based in Burlington, WASHINGTON (USA). from Sluice Gates: Tapered-Wedge Product line

  • Model 9560 - 6 Row Vine Chopper

    A lawnmower on steroids - when its green its gone. With the Vine Chopper Spudnik developed a mechanical alternative to chemical weed control. After chopping, as the potato skin sets and harvest begins, farmers have less vine to deal with. Thus harvester without vine chain or in hard vain can perform better and with an higher capacity. Different ...

    By Spudnik Equipment Company, LLC based in Blackfoot, IDAHO (USA). from Harvesting Product line

  • SCORPIONKING - Eight Wheeler Harvester

    The eight-wheeled ScorpionKing offers the best possible setting for efficient and productive work. The unique new crane solution offers excellent visibility in all directions, enabling smooth and flexible working whatever the conditions. Good visibility to both sides of the cabin allows for efficient and unlimited operation – the trees to be ...

    By Ponsse Plc based in Vieremä, FINLAND. from Harvesters Product line

  • Bear - 8-Wheeler Harvester

    The 8-wheeler PONSSE Bear is the largest harvester in the Ponsse product range and an unbeatable powerhouse for thick trees and demanding conditions. The product upgrade focuses on efficiency, structural endurance and ease of maintenance and use. At the same time, Bear has seen a complete facelift.

    By Ponsse Plc based in Vieremä, FINLAND. from Harvesters Product line

  • Rottne - Model H11 6WD - Harvester

    The new contender, ROTTNE H11D in a 6-wheel or 8-wheel design, with an articulated steering joint for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint give ROTTNE H11 excellent off-road performance and precise tracking. The harvester cab offers superb operator comfort and excellent visibility over ...

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Rottne - Model H14C - Harvester

    ROTTNE H14C is an easily operated harvester and a real powerhouse. An all-round harvester for both final felling and thinning capabilities. The harvester has a 6-wheel chassis with single rear axle and front portal bogie that ensures excellent ground clearance.

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Nisula - Model N5 - Harvesters

    The Nisula N5 harvester has been designed with thinning in mind. The design solutions are as reliable and simple as possible to ensure a high level of operating reliability. In thinning, profit is made through high productivity combined with minimized costs. Unnecessarily excessive investments in thinning equipment are simply not sensible.

    By Nisula Forest Oy based in Halli, FINLAND. from Harvesters Product line

  • Rottne - Model H8 - Harvester

    ROTTNE H8 is a thinning harvester with unique properties. The two-part chassis with an articulated joint in the centre produces precise tracking, and when combined with its levelling capabilities, the H8 harvester becomes extremely flexible and easily driven and leaves a minimum of damage when working out in the stand!

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Model 9580 - 8 Row Vine Chopper

    A lawnmower on steroids - when its green its gone. With the Vine Chopper Spudnik developed a mechanical alternative to chemical weed control. After chopping, as the potato skin sets and harvest begins, farmers have less vine to deal with. Different Rear Wheel Options Vine deflectors direct the cut vines into the furrows, allowing the cut potato ...

    By Spudnik Equipment Company, LLC based in Blackfoot, IDAHO (USA). from Harvesting Product line

  • Model ILH9-650 - Heavy-Duty Powered Harvester

    The heavy-duty ILH9-650 delivers an impressive 650 cu. ft. payload capacity and 9'-wide cut, equipping you to combat substantial weed infestations with ease and strength. Used with our transport barge, the ILH9-650 will help you clear and manage your waterways in record time.

    By Inland Lake Harvesters, Inc. based in Burlington, WISCONSIN (USA). from Harvester Product line

  • ALSTOR 8x8 - Model 300 - Harvester

    Now you can make your Alstor 8x8 to a thinning harvester. Alstor new harvester load-concept can be applied at all Alstor models. Within seconds you can change your forwarders to aneffective thinning harvester. In this load- concept, we have fitted the well known and robust processor Hypro 300.

    By Alstor AB based in Dingle, SWEDEN.

  • Asparagus - Model RGA - Harvesters

    The RGA harvests the whole asparagus in the soil mound, places the asparagus on a manual sorting conveyor and rebuilds the mound. All the functions of the machine are hydraulic, with electrical adjustment controlled from the tractor cab. Based on an 8-hour day, the RGA can harvest a plantation of between 10 and 15 hectares. The profitability of ...

    By Kirpy based in LAYRAC, FRANCE. from Agriculture- Harvesters Product line

  • Model AP R 375 - Harvester

    Weight 370 kg, 815 lbs. Maximum Delimbing Diameter 320 mm, 12.6'. Maximum Cutting Diameter 360 mm, 14.2'. Number of knives . Feed Force 12 kN. Saw Bar Type 404' 16'. Oil Flow required 90-150 l/min 40 GPM. Oil pressure nominal 210bar required . Delimbing speed 4.0 m/s13.1 ft/s. Crane Requirement 50 kNm. Carrier Size 80 HP. Carrier weight 6-8 ton. ...

    By Agroforteka JSC based in Kaunas, LITHUANIA. from Forestry Harvesters Product line

  • SMARTYIELD - Model PRO - Harvest Control

    Dealers installing their first SmartYield™ Pro systems were amazed at the ease and speed at which an installation could be completed. The system was extensively tested on over 40,000 acres of all major crops with accuracies often exceeding 97%. Producers who tested SmartYield™ Pro side by side against factory installed force-plate ...

    By Raven Applied Technology based in Sioux Falls, SOUTH DAKOTA (USA). from Harvest Controls Product line

  • Model AFM 35 - Harvester Heads

    AFM 35 is a powerful and versatile thinning head, which is suitable for conventional general as well as energy wood processing, multi stemming and loading. Optional multi tree handling cassette and the cutting blade is designed to speed up the cutting and handling of the small diameter energy wood. High feeding power and feeding speed ensure a ...

    By AFM-Forest Ltd based in Jyvaskyla, FINLAND. from Harvester Heads Product line

  • Drivelink Deburrer

    The drivelink deburrer helps to deburr all kinds of drivelinks on different kinds of chains.

    By Koneosapalvelu Oy based in Vilppula, FINLAND. from Harvester Products Product line

  • Model BS100 - Belt Grinder

    The Franzen Belt Grinder  BS100 ist a robust vertical-Belt Grinder. The easy to use BS100 is suitable for grinding and deburring all kinds of lawn mower blades and steel parts.

    By Koneosapalvelu Oy based in Vilppula, FINLAND. from Harvester Products Product line

  • Model BVM 90 - Motor Harvesters Machine

    The BVM 90 is the smallest machine in our production range, and by making use of a picking system designed for larger machinery, guarantees a high level of quality for picking operations.In production since 1998 . Simple and easy to handle, the BVM maintains a constant weight on the handlebar, whether the container is fully loaded or empty, since ...

    By BOSCO V. di Bosco Marco & C. s.n.c. based in Frazione Bozzola, ITALY. from Motor Harvesters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you