Only show results in Virginia? Ok

harvest data tracking equipment

  • Rottne - Model H8 - Harvester

    ROTTNE H8 is a thinning harvester with unique properties. The two-part chassis with an articulated joint in the centre produces precise tracking, and when combined with its levelling capabilities, the H8 harvester becomes extremely flexible and easily driven and leaves a minimum of damage when working out in the stand!

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvester Product line

  • Rottne - Model H11 6WD - Harvester

    The new contender, ROTTNE H11D in a 6-wheel or 8-wheel design, with an articulated steering joint for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint give ROTTNE H11 excellent off-road performance and precise tracking. The harvester cab offers superb operator comfort and excellent visibility over ...

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvester Product line

  • Waratah - Model H412 - Harvester Head

    The Waratah H412 is a compact head made for small wheeled and tracked machines. With its powerful feed, accurate measuring, and excellent delimbing performance, the H412 combines the advantages of two and four-wheel-drive harvester heads. Its compact size makes it highly maneuverable in dense thinning stands, and its multi-tree-handling equipment ...

    By Waratah based in Kamloops, BRITISH COLUMBIA (CANADA). from Harvester Head Product line

  • Eco Supreme - Model Keto-450 - Harvester Head

    Thinning and small scale final felling proceed smoothly as each operation is designed to take place accurately. Each operation has been taken into consideration in the structure of the head: grabbing the tree, sawing, starting the feed, accurate positioning for sawing and clean delimbing. The head has a fixed track system, which means that there ...

    By Kone-Ketonen OY based in Kristiinankaupunki, FINLAND. from Harvester Head Product line

  • Waratah - Model H290 - Harvester Head

    The Waratah H290 is a powerful, high-capacity new-generation harvester head. Built for superior performance in regeneration harvesting, it was specially designed for use with large wheel-and-track-based harvesters. The H290 features the highly efficient SuperCut 100 saw unit and can fell and process trees up to 760 mm (29.5 in.) in diameter. The ...

    By Waratah based in Kamloops, BRITISH COLUMBIA (CANADA). from Harvester Head Product line

  • Tidue Rubber Tracks

    Universal Rubber Tracks suitable for : Going through where no other devices can, Protecting your soils, Turning 100% power into adherence strength. Universal, for all labors. Harvesting, sowing, civil maintenance, forest maintenance…  Universal, for all machines. Suitable for attachment to all kinds agricultural equipment such as ...

    By Starks Industries based in Les Rosiers, FRANCE.

  • DataTrack - Sophisticated Data Collection System

    Sophisticated data collection is becoming commonplace on the farm thanks to DataTrackTM. Whether you are a family farmer or a major corporate enterprise, DataTrack is the answer to your production tracking dilemmas.

    By Agricultural Data Systems (ADS) based in Laguna Niguel, CALIFORNIA (USA). from Sophisticated Data Collection System Product line

  • Model Pro - SHP50 - Split Harvest Combines

    Specific for harvesting two, single-row plots in one pass. Specialized soybean nursery plot harvester that enables one operator to harvest two, one-row plots at the same time! The SHP50 is complete with ALMACO's patented dual plot automated packaging system, seed storage hopper and pneumatic seed transfer.  A serious ...

    By Almaco based in Nevada, IOWA (USA). from Split Harvest Combines Product line

  • Tiger - Model 5 - Sugar Beet Harvester

    The ROPA Tiger 5 was awarded an innovation medal for soil protection by the Agritechnica new technology commission - for the R-Soil Protect chassis with MICHELIN CerexBib tyre technology for soil protection.The advanced chassis system with roll stabilisation and slope compensation has already been implemented in the 2-axle ROPA Panther. In the ...

    By ROPA Fahrzeug- und Maschinenbau GmbH based in Herrngiersdorf, GERMANY. from Sugar Beet Harvester Product line

  • John Deere - Model 1270E - Eight-Wheeled Harvester

    Since its introduction in 1996, the John Deere 1270 Harvester has dominated harvester sales worldwide while setting the standard for durability and performance. And now the latest 1270E is the most powerful and productive yet. With its large 9.0-liter engine and CH7 Harvester boom, the 1270E performs at a level normally reserved for larger ...

    By John Deere based in Moline, ILLINOIS (USA).

  • Basrijs - Model BRP\ML - Plant Harvester - Medium Large

    This plant harvester is designed and intended for harvesting plants such as strawberry plants, asparagus crowns and simular plants. Available in harvesting width 135, 150 and 185 cm.

    By BASRIJS BV based in Rijsbergen, NETHERLANDS. from Plant Harvester - Medium Large Product line

  • John Deere - Model CS690 - Cotton Stripper Maximizes Harvest

    Available with 2014 Early Order Program. Non-stop round module harvesting. The CS690 Cotton Stripper features our exclusive non-stop harvesting solution, which increases productivity and uptime in each pass. A single man, single machine operation allows you to harvest and go using an on-board module builder that releases your completed round ...

    By John Deere based in Moline, ILLINOIS (USA).

  • Model SP 761 LF - Heavy Duty and High Performance Harvester Head

    The SP 761 LF is a compact, heavy duty and high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 761 LF is suited for working on both large wheel based harvesters as well as tracked harvesters and excavator carriers.

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Model SP 761 LF - Heavy Duty and High Performance Harvester Head

    The SP 761 LF is a compact, heavy duty and high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 761 LF is suited for working on both large wheel based harvesters as well as tracked harvesters and excavator carriers.

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Unverferth Killbros - Model 1950 - Dual-Auger Grain Cart

    The Killbros 1950 dual-auger grain cart is the choice for quick and convenient harvesting of your biggest fields. Both augers run full of grain for maximum unloading efficiency. Unloading up to 400 bushels per minute, the 1950 is built to handle large capacities of grain, keeping you moving through harvest.

    By Unverferth Mfg. Co., Inc. based in Kalida, OHIO (USA). from Dual-Auger Grain Cart Product line

  • Unverferth - Corner-Auger Grain Carts

    From start to finish, harvest goes smoother with a Brent grain cart. Harvest efficiency is pushed to the max with 1,200 plus to 550 bushel capacities with unloading speeds up to 500 bushels per minute. The corner-auger cart design means 100 percent unloading visibility from the tractor cab. When you're ready for the best, you're ready for Brent.

    By Unverferth Mfg. Co., Inc. based in Kalida, OHIO (USA). from Corner-Auger Grain Carts Product line

  • Model 6 - Field Floater Grain Carts

    Balzer is the leader in Large Capacity Grain Carts with the Field Floater 6. These carts offer the most efficient performance during harvest time. These grain carts are available in sizes 1,450, 1,700 and 2,200 bushels.

    By Balzer Inc. based in Mountain Lake, MINNESOTA (USA). from Field Floater Grain Carts Product line

  • Hardware Traceability System

    Our hardware solutions integrate seamlessly with the Dragonfly AG software platform bringing you accurate realtime data. Do you have a bottleneck at a dock or cold store during harvest season?  Our hardware traceability system can help keep the cold chain & assist you in moving more product faster and more accurately, with fewer ...

    By Crop Tracker - a brand by Dragonfly AG based in Kingston, ONTARIO (CANADA).

  • Hypro - Model 755 HB - Wheel Carried Processor

    The HYPRO 755 HB Wheel Carried Processor provides more forest operators the opportunity to own and use a strong and competitive harvesting machine. The processor connects very easily to the tractor with the same principle as with a forest trailer.

    By Hypro AB based in Lönsboda, SWEDEN. from Wheel Carried Processor Product line

  • Disc Harrow

    With this new carrier arm system two serrated concave discs are mounted on a wide clamping bracket. This ensures that the discs always retain their position and angle. Even in heavy soil it is impossible for them to deviate to the side – hard tyre tracks are broken up reliably. Four rubber elements in the mounting bracket provide overload ...

    By Bulagro AD based in Stara Zagora, BULGARIA. from Disc Harrow Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you