harvester machine Equipment in Sweden

  • Eco Log - Model 550D Blue - Harvesters

    Eco Log 550D Blue is the handy harvester suitable for work in small trees. Like all Kco Log harvesters the Eco Log 550D Blue is equipped with pendulum arms, which gives the machine a ground clearance of 1324 mm if necessary.  Eco Log 550D Blue comes equipped with dual implement pumps, one for the crane and one for the harvesting head. This ...

    By Eco Log Sweden AB based in Söderhamn, SWEDEN.

  • Model 560F - Harvester

    The Malwa 560F is a truly lightweight and yet productive forwarder with excellent working environment. The new 75 hp Caterpillar engine offers high torque at low rpm with less noise and fuel consumption as a result. In addition to this the low net weight and small turning radius enables the machine to operate gently and with minimal impact to the ...

    By Malwa International AB based in Skene, SWEDEN.

  • Vimek - Model 404 T5 - Harvester

    A new generation Vimek harvester equipped with new engine from CAT with 60 Hk and a modern hydrostatic transmission from Bosch Rexroth. The steering front axle offers alternative width of the machine (1,80 m or 2,15 m). Improved environment for the operator thanks to rubber mounted cabin, new and modern display and mini joysticks as options ...

    By Vimek AB - part of the Cranab Group based in Vindeln, SWEDEN.

  • TERRI - Model 3020 - Harvester

    The model 3020 is a development of the TERRI 34. It is smaller than the 34; its size resembles more its predecessors 2020 and 2040. The technology has developed and in the TERRI 3020 there is a lot of new technology, developed especially for the 34. For instance full hydrostatic propulsion. It still has a spacious cabin and is just as flexible in ...

    By Alfing i Älmhult AB/Terri based in Älmhult, SWEDEN.

  • ALSTOR 8x8 - Model 300 - Harvester

    Now you can make your Alstor 8x8 to a thinning harvester. Alstor new harvester load-concept can be applied at all Alstor models. Within seconds you can change your forwarders to aneffective thinning harvester. In this load- concept, we have fitted the well known and robust processor Hypro 300.

    By Alstor AB based in Dingle, SWEDEN.

  • Rottne - Model H8 - Harvester

    ROTTNE H8 is a thinning harvester with unique properties. The two-part chassis with an articulated joint in the centre produces precise tracking, and when combined with its levelling capabilities, the H8 harvester becomes extremely flexible and easily driven and leaves a minimum of damage when working out in the stand. When you need to move ...

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Tree Harvesters Product line

  • Rottne - Model H11 6WD - Harvester

    The new contender, ROTTNE H11 6WD in a 6-wheel design, with an articulated steering joint for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint give ROTTNE H11 6WD excellent off-road performance and precise tracking. The harvester cab offers superb operator comfort and excellent visibility over the ...

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Tree Harvesters Product line

  • Komatsu Forest MaxiXplorer - Control and Information System

    Maxi is the umbrella term for Komatsu Forest´s comprehensive control and information system for effective and profitable logging. It is comprised of three products, each tailor made for their respective task: Harvester (MaxiXplorer), forwarding (MaxiForwarder) and other machines equipped with Komatsu Harvester heads (MaxiHead).

    By Komatsu Forest based in Umeå, SWEDEN. from Tracked Machines Product line

  • Terri - Model 34 - Forwarder/Harvester

    Terri 34 is the latest of the Terri forestry machines. Just like its predecessors it is a light, flexible machine, easy to use on all sorts of land. This new generation has, however, been developed on several important details. In order to increase both the loading area (1,5 m2, 1860 or sq ft) and the stability, the machine has been made wider, to ...

    By Alfing i Älmhult AB/Terri based in Älmhult, SWEDEN.

  • Lightweight Multipurpose Harvester / Forwarder

    Light log C is not only an easy combination machine that reduces land erosion and can go where other machines can stay. It is also built to suit rider preference for a comfortable and safe working environment. The cab, Light log combi meets all requirements in terms of comfort & safety. It is well insulated against noise and external climate. ...

    By Timbear AB based in Strömsund, SWEDEN.

  • Edenhall - Model 753 - Suger Beet Harvester

    The EDENHALL SEVEN SERIES fully offset, two, three and four row trailed, tanker suger beet harvesters. Using the latest technology to set new standards in ease of operation and quality of harvesting.  Joystick control  Combi-clean System Large 12 tonne holding tank.  A full integrated single unit harvester - a complete lifting ...

    By Edenhall Mek Verkstad AB based in VALLÅKRA, SWEDEN.

  • Edenhall - Model 754 - Suger Beet Harvester

    The EDENHALL SEVEN SERIES fully offset, two, three and four row trailed, tanker suger beet harvesters. Using the latest technology to set new standards in ease of operation and quality of harvesting. * Joystick control * Combi-clean System * Large 12 tonne holding tank * A full integrated single unit harvester - a complete lifting system.

    By Edenhall Mek Verkstad AB based in VALLÅKRA, SWEDEN.

  • Model SP 461 LF - Big Little Harvester Head

    The SP 461 LF is a very fast, nimble high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 461 LF is perfectly suited to work on midsize thinning carriers with long reach as well as smaller in stand thinning carriers.  Fast feeding in combination ...

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Model 560C - Flexibfa Combi Forest Machine

    A stand-operating dual-machine that is easy to :onvert from forwarder to harvester without com->romising on productivity and performance. Unique olution with removable counterweight gives the 4alwa 560c the performance similar to a traditional larvester. The low weight makes the machine very uitable on sensitive ground and moors, especially ...

    By Malwa International AB based in Skene, SWEDEN.

  • Model SP 861 LF - Raw Power and IQ Combined Harvester Heads

    The SP 861 LF is a powerful and reliable high performance harvester head. It is designed according to the LF principle for maximum productivity. The SP 861 LF is specifically designed for installation on tracked carriers and demanding harvesting applications.

    By SP Maskiner AB based in Ljungby, SWEDEN.

  • Model AFM 55 - Harvester Head

    AFM 55 is a solution for clear felling and later thinning operations, made with middle sized forest machines. AFM 55 has big capacity and perfect holding geometry for the big stems. High flow hydraulic valve together with proportional pressure adjustment exploits perfectly the base machine power. Three roller feeding together with four delimbing ...

    By AFM-Forest Ltd Distributor in Ösmo, SWEDEN. from Harvester Heads Product line

  • Model AFM 60 - Harvester Head

    AFM 60 has an excellent reputation as a strong, reliable, and versatile harvester head. With its compact design, the AFM 60 is suited perfectly to both hardwood and softwood operations. A short frame with one pair of heavy-duty delimbing knives makes processing even the lowest-quality trees with heavy limbs easy. The AFM 60 is used in all kinds of ...

    By AFM-Forest Ltd Distributor in Ösmo, SWEDEN. from Harvester Heads Product line

  • Model AFM 35 - Harvester Heads

    AFM 35 is a powerful and versatile thinning head, which is suitable for conventional general as well as energy wood processing, multi stemming and loading. Optional multi tree handling cassette and the cutting blade is designed to speed up the cutting and handling of the small diameter energy wood. High feeding power and feeding speed ensure a ...

    By AFM-Forest Ltd Distributor in Ösmo, SWEDEN. from Harvester Heads Product line

  • Model AFM 45 - Harvester Head

    AFM 45 is effective harvesting head for thinning and final felling done with small and medium-sized forest machines. An exact delimbing is made with four knives and a non-sliding four motor feeding. Tree handling capacity is optimized for small and middle sized stems. AFM 45 is equipped with powerful hydraulics and the automatic chain tensioning ...

    By AFM-Forest Ltd Distributor in Ösmo, SWEDEN. from Harvester Heads Product line

  • Hypro - Model 755 HB - Wheel Carried Processor

    The HYPRO 755 HB Wheel Carried Processor provides more forest operators the opportunity to own and use a strong and competitive harvesting machine. The processor connects very easily to the tractor with the same principle as with a forest trailer.

    By Hypro AB based in Lönsboda, SWEDEN. from Tractor Processor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you