Only show results in Virginia? Ok

Harvesting Boom equipment

  • Harvest Booms

    ZEMA harvest beams (1- to 3-level) systematise the work steps during the vegetable harvest and are used in combination with the ZEMA carrier vehicle. The harvesting process is divided into logical work sequences. Depending on the model, 1-, 2- or 3-level,  the efficiency per employee and consequently the productivity increases.

    By Josef Zeyer Stahlbau Agrarsysteme GmbH based in Neresheim, GERMANY. from Harvesting Product line

  • Vegetable Harvesting Booms

    Vegcraft specialises in front tractor-mounted booms for harvesting a wide variety of vegetable crops from lettuce and cabbage to fresh herbs and broccoli. We custom design and build each machine, allowing us to fulfil your harvesting needs. The basis of our machines is a strong galvanized steel platform with an aluminium and PVC canopy. All areas ...

    By Vegcraft based in By Arbroath, UNITED KINGDOM.

  • Model SP-160 - Custom Self-Propelled Four Bed Harvesters

    Mechanical onion harvesting does not get any bigger or better than the SP-160 from Lee Shuknecht & Sons, Inc. This self-propelled four bed unit will harvest and top your onion crop at some of the fastest speeds and capacities currently available. Despite its size and capacity, the SP-160 will gently direct load up to four 40' beds or ...

    By Lee Shuknecht & Sons, Inc. based in Elba, NEW YORK (USA). from Harvesters Product line

  • Rigid Harvester

    The Alloway Standard Harvester has a lot of the same great features it had in the past, such as its exclusive curved parabolic elevator which eliminates troublesome spring tension arms and results in less beet damage and losses. The grab rolls, paddle shafts and new chain bed utilize dual drive technology which reduces stress on support bearings ...

    By Alloway Standard Industries based in Fargo, NORTH DAKOTA (USA). from Harvester Product line

  • Rottne - Model H8 - Harvester

    ROTTNE H8 is a thinning harvester with unique properties. The two-part chassis with an articulated joint in the centre produces precise tracking, and when combined with its levelling capabilities, the H8 harvester becomes extremely flexible and easily driven and leaves a minimum of damage when working out in the stand!

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Barko - Model 240B-H - Tracked Harvester

    The Barko 240B-H tracked harvester offers superior drawbar pull and high tractive effort and to get around in the forest. Offering a peak torque increase of 10% over the previous model, the 240B-H is packed with power to get the job done.

    By Barko Hydraulics, LLC based in Superior, WISCONSIN (USA). from Harvesters Product line

  • Model SP-132 - Custom Self-Propelled Two Bed Harvesters

    If you are in the onion industry and you want to maximize your production, it is time to talk to Lee Shuknecht & Sons, Inc. We have been manufacturing mechanical onion harvesting units for over 30 years, and we can help you increase your output while gently handling the produce. The SP-132 is a self-propelled two bed harvester that eliminates ...

    By Lee Shuknecht & Sons, Inc. based in Elba, NEW YORK (USA). from Harvesters Product line

  • Barko - Model 260B-D - Tracked Harvesters

    Offering greater horsepower and swing power than competitive units in its weight class, the 260B-D tracked harvester delivers more pre-hour production while remaining highly reliable.

    By Barko Hydraulics, LLC based in Superior, WISCONSIN (USA). from Harvesters Product line

  • Bear - 8-Wheeler Harvester

    The 8-wheeler PONSSE Bear is the largest harvester in the Ponsse product range and an unbeatable powerhouse for thick trees and demanding conditions. The product upgrade focuses on efficiency, structural endurance and ease of maintenance and use. At the same time, Bear has seen a complete facelift.

    By Ponsse Plc based in Vieremä, FINLAND. from Harvesters Product line

  • Rottne - Model H11 6WD - Harvester

    The new contender, ROTTNE H11D in a 6-wheel or 8-wheel design, with an articulated steering joint for thinning and final felling. Powerful engine, hydrostatic transmission and articulated frame joint give ROTTNE H11 excellent off-road performance and precise tracking. The harvester cab offers superb operator comfort and excellent visibility over ...

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Rottne - Model H14C - Harvester

    ROTTNE H14C is an easily operated harvester and a real powerhouse. An all-round harvester for both final felling and thinning capabilities. The harvester has a 6-wheel chassis with single rear axle and front portal bogie that ensures excellent ground clearance.

    By Rottne Industri AB based in ROTTNE, SWEDEN. from Harvesters Product line

  • Barko - Model 260B-H - Tracked Harvester

    The Barko 260B-H tracked harvester has a D7A undercarriage suitable for use with larger harvesting attachments. The machine provides 10% more torque than its predecessor, allowing it to make even quicker work of tough jobs.

    By Barko Hydraulics, LLC based in Superior, WISCONSIN (USA). from Harvesters Product line

  • Barko - Model 240B-D - Tracked Harvesters

    The Barko 240B-D harvester provides impressive drawbar pull of better than 1.3 to 1 ratio, allowing it maneuver across tough terrain with ease and increase harvesting efficiency.

    By Barko Hydraulics, LLC based in Superior, WISCONSIN (USA). from Harvesters Product line

  • Gremo - Model 1050H - Harvester

    The Gremo 1050H is a reliable harvester ideal for thinning and final cutting. The new engine, strong as an ox, together with the big working pump produces sufficient hydraulic power for any imaginable situation. This means shorter working cycles and yet enough strength for operating in interaction the different functions. In other words: Better ...

    By Gremo AB based in ÄTRAN, SWEDEN. from Harvesters Product line

  • Harvesters

    Forestry and logging operations require tough equipment that can navigate all types of terrain in the most challenging environmental conditions. The best harvesters are capable of felling, de-limbing and bucking trees with minimal effort. If you're looking for the best harvesters for sale in southern California, look no further than Johnson ...

    By Johnson Machinery based in Riverside, CALIFORNIA (USA).

  • Waratah - Model CH6 - Harvester Crane

    Waratah offers purpose-built harvester booms and cranes. These forestry booms and cranes dramatically increase the working zone and ability to work close to the carrier, as well as provide optimum height and lift capacity. Maximum productivity. Minimal downtime. You need equipment that can take on the big jobs – and that’s durable ...

    By Waratah based in Kamloops, BRITISH COLUMBIA (CANADA). from Harvester and Forwarder Cranes - Harvester Cranes Product line

  • Tigercat - Model H250B - Track Harvesters

    The H250B processor offers harvesting contractors a lower cost alternative to Tigercat's 800 series harvesters while providing far superior productivity to excavator conversions.The new H250B is best suited to roadside processing applications. The efficient load sensing hydraulic system with swing priority delivers simultaneous power to all ...

    By Tigercat Industries Inc. based in Brantford, ONTARIO (CANADA). from Track Harvesters Product line

  • Model 953 - Potato Harvester

    Model : 953. Number of Rows: 4. Height: 10 ft. 9 in. (3.28 m). Width (transport): 14 ft. (4.27 m). Length: 28 ft. 7 in. (8.71 m). Weight: 23,000 lb. (10.43 MT). Tongue Weight: 3,400 lb. (1.54 MT). Horsepower Requirement: 175 hp. Rear Cross Chain Width: 36 in. (91.44 cm). Devine Chain Width: 69 in. (175 cm). Side Elevator Chain Width: 42 in. ...

    By Double L based in Heyburn, IDAHO (USA). from Potato Harvesters Product line

  • Model 973 - Potato Harvester

    Model : 973. Number of Rows: 4. Height: 10 ft. 9 in. (3.28 m). Width (transport): 14 ft. (4.27 m). Length: 33 ft. 0 in. (10.06 m). Weight: 28,000 lb. (12.70 MT). Tongue Weight: 5,000 lb. (2.27 MT). Horsepower Requirement: 225 hp. Rear Cross Chain Width: 42 in. (106.68 cm). Devine Chain Width: 69 in. (175 cm). Side Elevator Chain Width: 42 in. ...

    By Double L based in Heyburn, IDAHO (USA). from Potato Harvesters Product line

  • Komatsu - Model XT430-3 & XT430L-3 - Tracked Forestry Harvesters

    The New Komatsu XT430-3 & XT430L-3 boast a modern forestry cab that features a state-of-the-art digital control system and superior ergonomics. Combined with high lift capacity, powerful swing torque, and a robust Komatsu undercarriage the XT430-3 & XT430L-3 deliver high productivity, reliability and durability.

    By Komatsu Forest based in Umeå, SWEDEN. from Tracked Harvesters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you