Only show results available in Virginia? Ok

Hay Feeder equipment

  • Model 161.SCF - Single Cradle Hay Feeder

    prevents wasted hay. 1 3/4' 14 ga. round tube frame and cradle. add 2 x 6 boards to the bottom to make a skirted feeder. 48' tall.

    By BJ Manufacturing based in Harrison, ARKANSAS (USA). from Feeders Product line

  • Applegate Livestock - 14 Gauge Hay Feeders

    46' tall - 8' diameter. 14 gauge steel frame. Available with or without the panel option. 1-1/4' diagonals and vertical bars. 15 vertical bars on open feeder. Hardware included. Ultra-protected powder coat bright red

    By Applegate Livestock Equipment Inc based in Union City, INDIANA (USA). from Feeders Product line

  • Model 160.DCF - Double Cradle Hay Feeder

    2 3/8' sch. 40 pipe frame. 1 3/4' heavy wall round tube cradle. holds two 5' x 6' round bales. add 2 x 6 boards to the bottom to make a skirted feeder. 50' tall.

    By BJ Manufacturing based in Harrison, ARKANSAS (USA). from Feeders Product line

  • Weldy - Green Chop Hay Feeders

    Designed to feed silage, green chop, large round or square bales The 3/4' exterior plywood is 4ft. high and is easy to remove for feeding large round bales. The 'V' in center promotes feed-down within the reach of the animals. Equipped with a telescoping tongue and 11 L15 8-ply tires and tubes. Trough height is 24'.

    By Weldy Enterprises based in Wakarusa, INDIANA (USA). from Feeders Product line

  • Hex Hay Feeder

    Stroberg Hex Hay Feeder for sheep or calves. The floor is 6' up so can be used for grain feeding. It comes in 2 sections and has 14 openings. Unique design makes it easily moved to different locations.

    By Stroberg Equipment Company based in Hutchinson, KANSAS (USA).

  • Poly Hay & Grain Feeder

    3 types to choose from: Mounts to wall and corners in stalls for feeding horses. Holds 3 flakes of hay in the 3/8″galvanized manger. Lower poly feeder holds up to 4-gallons of grain. Easy to clean, fill, and maintain. Works for a variety of feeding applications

    By Tarter Farm and Ranch Equipment based in Dunnville, KENTUCKY (USA). from Feeders Product line

  • Daniels - Telescoping Bale & Loose Hay Feeder

    7x14' sides work in as livestock eats, ranchers say cattle waste much less hay with this feeder than others they use. Panels can be used for portable corral panels in otf season.

    By Daniels Manufacturing Co. based in Ainsworth, NEBRASKA (USA). from Gates & Panels Product line

  • Double-Sided Hay & Grain Feeder

    The Two-Sided Hay & Grain Feeder feed sheep from both sides. The feeder is 30″ wide, has adjustable legs, and can be adjusted so the top of the pan is 10″ off the ground up to 30″ high. They are available in three standard lengths and can be Kustom built. It has a 6″, 18 gauge U.S. galvanized pan in bottom of feeder. ...

    By KSEM, Inc. based in Edwardsville, ILLINOIS (USA). from Feeders Product line

  • Hay Bale Feeder

    Applegate's Hay Feeders are known for superior strength & longevity.  This 2 piece Bale Feeder is 8' in diameter & 46' tall with a bottom panel to help with waste.  It has 1 1/4' diagonal & vertical bars & hardware to connect the two sides is included.  The feeder comes in a red Ultra-protected powder coated paint.

    By Zeitlow Distributing Company based in McPherson, KANSAS (USA).

  • Hay Saver Feeder

    Our feeder is hard to beat! The Best Haysaver is made from 2-inch, 12 and 14-gauge galvanized tube attached to a corrosion-proof OTR tire. The steel is saddle-notched and welded in one piece with no bolt-together panels, making it super-sturdy.  All welds are painted with 97% zinc paint. Since the bottom doesn’t rot away, the Best ...

    By Best Livestock Equipment based in Georgetown, KENTUCKY (USA).

  • Comby - Hay & Silage Feeder

    The Robertson Comby is a very versatile machine being able to feed all types and sizes of round and square bales including straw, hay and baled silage. All of these are able to be loaded with the self loading forks. The Robertson Comby also feeds fine chop silage. With a level load capacity of 4.0m3 or with the slip on bin an extra ...

    By Robertson Manufacturing based in Canterbury, NEW ZEALAND.

  • Hay & Grain Feeder

    Research with veterinarians and producers helped design a feeder combining animal safety & thrift in hay loss. The grain trough is 1/8' X 2' X 2' angle iron surrounding 18 ga. sheet metal. A lip at the grain tough edge prevents grain & leaf from being pulled onto the ground. The manger is solid 3/8' rod. Rod spacing either 3' or 4”. ...

    By Shauls Manufacturing based in Live Oak, CALIFORNIA (USA).

  • 3-Piece Heavy-Duty Bull Hay Feeder

    Ideal for feeding of round bales to large cattle in tough situations 2” round high-tensile strength steel tubing S-Bar design prevents calves from getting inside 8’ diameter to accommodate large bales Super-duty round end post brace with 3 bolt connections for superior strength and rock-solid assembly 17” metal hay saver to reduce waist ...

    By Ranch Supply LLC based in Burnet, TEXAS (USA).

  • Hay Feeders for Goats, Sheep & Small Animals

    24' x 22' x 9' Hayrack fits over 1 1/2' Thickness

    By Little Mountain Steel Fabrication based in Myerstown, PENNSYLVANIA (USA).

  • Model HAY-AVERS - Bale Feeders‎

    Keeps bale off ground - less spoilage. A wood floor can be installed by owner. Cattle feed at animal height. No feeding over the top. Basket large enough for 6’x6’ bales (Model F 8X8). Easy to move with a loader. Can be hauled on a pickup - 6 sections. 28 feed openings. Recommend 1 feeder for approximately 25 dairy or 35 beef cattle. ...

    By New Vienna Metal Works Inc. based in New Vienna, IOWA (USA). from Bale Feeders Product line

  • Rovibec - Model PF 600 - Hay Processor

    Easy adjustment of fiber length depending your needs. Tub speed and grid adjustable to get prickly fiber of 1 ½ ‘’ to 3‘’ (3,8 to 7,6 cm). Cut bale evenly from beginning to the end. Easy maintenance and blade replacement access. Compatible with most round and squares bales.

    By Rovibec Agrisolutions Inc. based in Ste-Monique, QUEBEC (CANADA). from Feeders Product line

  • Weldy - Model H-5 - Hay and Grain Feeders

    6-Sided Feeder. Designed for cattle or horses. Feeds hay and grain. Has 12 slanted tubular steel bars with steel floor, skirt, and legs.

    By Weldy Enterprises based in Wakarusa, INDIANA (USA). from Feeders Product line

  • Weldy - Model H-4C - Hay and Grain Feeders

    6-Sided Feeder. Designed for calves. 12 slanted bars. Steel Floor.

    By Weldy Enterprises based in Wakarusa, INDIANA (USA). from Feeders Product line

  • Real Industries - Super Hay Saver Oval Feeder

    Long enough to hold 2 round bales or multiple square bales. New tapered design to minimize waste. Double slant bars to encourage dropping of hay as head with draws from feeder. 20 inch skirting to prevent injuries. Constructed of 1 1/4 X 1 1/4 square tube. Welded on all sides. Sold unpainted unless otherwise ordered.

    By Real Industries Ltd. based in Rathwell, MANITOBA (CANADA). from Feeders Product line

  • S.I. Feeders - Mini Semi-Stationary Bunk

    Feeds calves up to 500 lbs. Use inside or outside. Easily moved. Adjustable legs allow the bunk to grow with the calves. Legs are shaped to resist freeze down. Popular use for sheep. Feeds hay, grain, and silage. Feed savings from our functional slant bars. Feed savings edge-top of bunk is folded in and down. Heavy steel pan is one piece for ...

    By Cowco, Inc. based in North Vernon, INDIANA (USA). from Livestock Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you