Haymaking Equipment In Europe
-
Manufactured by Twose of Tiverton Limited - a member of the Alamo Groupbased in UNITED KINGDOM
3.0 and 3.9m working widths. Three-point linkage mounting. Simple height adjustment. Can be used for raking or tedding. Robust build quality. Delivers a wide and even spread and a large fluffy swath. Hardened crown-wheels, pinions and drivelines between the rotors for long-lasting ...
-
Manufactured by BCS Groupbased in ITALY
The Duplex are double knife cutter bars, where the knives and teeth move simultaneously in opposite directions. The perfect ‘scissor-cut’ of the Duplex severs the stalks of the forage in a clean cut without any fraying, keeping its nutritional value intact. This type of cut also allows rapid and lush re-growth of the turf. The reduced power absorption and limited weight allow the ...
-
Manufactured by De Cloet srlbased in ITALY
The new convertible hauled hay rake by Decloet converts easily from a 'V' shaped configuration to a 'V+2 stars' configuration, without altering the structure of the machine ...
-
Manufactured by BCS Groupbased in ITALY
Rotex XTtake their origin from the renowned TSB and are the new rear disc mowers by BCS. The machines have a new look and their structure was reinforcedto face always more and more demanding work conditions for larger cutting fields and reduced processing time, to improve productiveness. Reliability, performance, working speed and high quality of the cut forage are the strengths of new Rotex ...
-
Manufactured by BCS Groupbased in ITALY
Rear-mounted disc mower-conditioner, chevron roller conditioner. Rotex XR take their origin from the renowned Rotex R and are the new mower-conditioners with rear discs produced by BCS, combining disc mower cutting quality and allow forage to be pressed so as to reduce drying times by over 50%. The appreciable saving of time and the lesser risk of exposure of the forage to climatic risks are all ...
-
Manufactured by CAEB International Srlbased in ITALY
Compact round baler, ideal for hillside and mountain areas. It is adaptable to mini-mowers and rotovators of all brands and models. Every bale weighs on average 20/25 Kg and it is formed in about 40 seconds, with a total output of approximately 1,500 Kg hay per hour. This kind of bales are called "tender heart bales", because the bale core is less pressed than the outer part, thus allowing the ...
-
Manufactured by CAEB International Srlbased in ITALY
The mini wrapper AV550 is siutable for single-axle mowers and motocultivators of all brands and models. Bales are wrapped by means of the power-unit PTO through a quick-coupling flange. The bale wrapping operation is completely automatic; the operator only has to determine the type of wrapping required and then to operate the start lever. The machine stops automatically after the work has been ...
-
Manufactured by CAEB International Srlbased in ITALY
The tractor-drawn MOUNTAINPRESS TPL was designed for farmers in mountain areas who require agile, safe and highly professional machines. The bale of hay weighs 20/25 Kg in the maximum production conditions and is formed in about 40 seconds, achieving a total hourly production of approximately 1,500 Kg. ...
-
Manufactured by CAEB International Srlbased in ITALY
The MINICARGO is designed with a simple and rapid driving movement and a very low centre of gravity that ensures good stability. The loading capacity, the limited overall dimensions and easy handling make this machine ideal for use on hillside and mountain areas. The two versions differ in the type of container, which can be readily replaced depending on various requirements. An efficient tipping ...
-
Manufactured by DA ROS GREEN S.R.Lbased in ITALY
The belt swather is suitable for steep slopes and tight places, working both forward and in reverse to reach every corner. It is attached to three points of the tractor, which makes it easy to handle and manage, and the weight does not create imbalances. It comes in 4 working widths and can adapt to every tractor. It must protrude by around 10/15 cm from the back wheels of the tractor. It can be ...
-
Manufactured by BCS Groupbased in ITALY
The Rotex Avant NT R are front-mounted mower-conditioners with limited weight and dimensions for use on both traditional and isodiametric tractors as well as on special tractors configured for mowing mountain pasture grass. The minimal power absorption from the PTO makes the Rotex Avant NT R suitable also for use on low powered tractors, in the mountain and on ...
-
Manufactured by BCS Groupbased in ITALY
BCS widens its range of front-disc mowers with thenew Rotex Edelweiss,which are more lightweight and compact and hence perfect for alpine use and suitable to be coupled to all types of tractors, including isodiametric and special mountain ones. Available in afive, six and seven-disc versions with widths cutting up to 2.85 meters, not only do the Rotex Edelweiss machines offer all the improvements ...
-
Manufactured by BCS Groupbased in ITALY
The Rotex Avant NT are front-mounted mowers withlimited weight and dimensionsfor use on both traditional and isodiametric tractors as well as on special tractors configured for mowing mountain pasture ...
-
Manufactured by BCS Groupbased in ITALY
The NEVA F8 Avant front-mounted mower-conditioners are designed for professional haymaking. Intended for the market of large surface areas and intensive agriculture, their strengths lie in their superior performance and operating ...
-
Manufactured by BCS Groupbased in ITALY
The NEVA R7 and R8 Avant front-mounted mower-conditioners are designed for professional haymaking. Intended for the market of large surface areas and intensive agriculture, their strengths lie in their superior performance and operating ...
-
Distributed by AWS Machinery Salesbased in UNITED KINGDOM
This latest telescopic model in the Volter Range from Zaga has all the excellent features of model ZK-3000, the universal 3 metre Haymaker. However due to it's variable width the 380 has the added advantage of being able to operate with wider mowers. The 380 can carry out every conditioning operation required on grass for both Hay and ...
-
Manufactured by Antonio Carraro Spabased in ITALY
A new "wide track" version with low centre of gravity is the latest addition to the Tony family of isodiametric tractors with hybrid mechanical-hydrostatic transmission with electronic control. The special configuration of this version renders it ideal for working across slopes (haymaking in particular). Available with the optional ...
-
Manufactured by Bellon Srlbased in ITALY
The COMBI-T500 and COMBI-T500GM combined mowers consist of three mowing elements with 2 drums, one frontal and two lateral, for front linkage to a tractor with front P.T.O. In this case a mowing width of up to 5 m can be obtained, thus considerably reducing work times. For rapid haymaking with exactly the right level of humidity, the ...
-
Manufactured by Bellon Srlbased in ITALY
The lateral drum mowers optimise fodder collection times, thus improving production rates. In models F220, F240 and F280 the most suitable tool can be chosen according to the size of the area to be mown and individual requirements. When you need to reduce drying and haymaking times, the models F220GM, F240GM and F280GM, provided with ...
-
Manufactured by Bellon Srlbased in ITALY
, the COMBID580GM model is provided with rubber roller conditioner, which reduces drying and haymaking times. Combined disc mowers are ideal for hilly or undulating ground. This type of mowing bar with rounded flattened shape, in which the blades rotate close to the upper edge and contra-rotating blade, prevents accumulation of soil between the hay mown, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you