Only show results available in Virginia? Ok

High Capacity Automatic Milking equipment

  • AktivPuls - Model Robot 2020 - Milking Robot Generation

    The tried-and-tested and dependable industrial robot technology guarantees high operational reliability. During the actual milking process, there is no technical equipment underneath the cow. This means less stress, but also a lower risk of damage caused by the cow as well as fewer malfunctions of the hardware, which makes the technology of the ...

    By System Happel GmbH based in Friesenried, GERMANY. from Automatic Milking Product line

  • Model Horizontal Type - Automatic Washing (Capacity 2000 lt- 10000lt)

    Kromel Cooling Tanks ; Milking refrigating time from 35°C to 4°C under 3 hours. Cooling performance Class 2/A/II. Special calibrated manuel scale with %003-4 sensitive rate.1.walled 2mm and 1 mm walled accuplated Ep type heat transfer plate.Isolated walled from AISI 304 S.S.Tank body accuplated on whole chassis.Product Outlet DN 50 ...

    By Kromel Makine Sanayi A.S. based in Hanlı / Arifiye / Sakar, TURKEY. from Milk Elimination Product line

  • ComfortFlow - Model C1 - Milking Carousel

    A continuous and smooth access to the milking parlour is the most important prerequisite for achieving a high milking output in the carousel. The ComfortEntry system makes it very inviting for the cow to enter the milking parlour. The ComfortEntry system makes the work process in the milking carousel easier for cows and milkers. The milking ...

    By System Happel GmbH based in Friesenried, GERMANY. from Milking Parlours Product line

  • MP Vertitank - Model MPV 50 - 2.500lt - Open Type Milk Cooling Tanks

    The MP Vertitank series is available in 13 different capacities, covering a range from 50 liters to 2,500 liters, that meets the needs of all dairy units & cheese dairies.

    By Milkplan SA based in Kolchiko,, GREECE. from Milk Cooling Product line

  • Parallel Milking Parlour

    The Parallel  milking  parlour  is another solution for the increasing needs of a modern dairy farm, with a large number of dairy cows. This type of milking system requires less space in terms of parlour capacity,   since animals are positioned at 90°.  Parallel parloursare equipped with a backward moving ...

    By Agromasters based in Thessaloniki, GREECE. from Milking Parlours - Milking Parlours for Cows Product line

  • Kromel - Milk Transport Tanks

    KROMEL Tankers, (mounted vehicle chassis). It's suitable for all type of liquids. From 1500 lt to 30000lt capacities. Isolated and unisolated design. It's suitable for long distances areas. High Efficiency – Optimization.

    By Kromel Makine Sanayi A.S. based in Hanlı / Arifiye / Sakar, TURKEY. from Milk Elimination Product line

  • Model SC 3,000 and 5,000 L - Closed Milk Cooler

    Direct expansion closed milk cooler with automatic washing. Capacity: 3,000 to 5,000 litres. Performance: 2, and 4 milkings. Manufactured in AISI 304 stainless steel and compliant with the most stringent food-processing requirements. High-performance injected polyurethane foam insulation providing outstanding isothermal properties. R 22 or R 404A ...

    By Serap Group based in Gorron, FRANCE. from Closed Milk Coolers Product line

  • Model SE 900 to 30,000 L - Closed Milk Cooler

    Direct expansion closed milk cooler. Capacity: 900 to 30,000 litres. Performance: 2, 4 and 6 milkings. Manufactured in AISI 304 stainless steel and compliant with the most stringent food-processing requirements. Automatic wash in both clockwise and anticlockwise direction. High-performance injected polyurethane foam insulation providing ...

    By Serap Group based in Gorron, FRANCE. from Closed Milk Coolers Product line

  • Model MS 550 to 850 L - Mobile Closed Milk Coolers

    Mobile closed milk coolers. Capacity: 550 to 2,500 litres. Performance: 2, and 4 milkings. Manufactured in AISI 304 stainless steel and compliant with the most stringent food-processing requirements. High-performance injected polyurethane foam insulation providing outstanding isothermal properties. MS and MSE models compliant with standard ISO ...

    By Serap Group based in Gorron, FRANCE. from Mobile Closed Milk Coolers Product line

  • Peymak - Model 5000 LT - 12000 LT - PHS Horizontal Milk Cooling Tanks

    AISI 304 quality stainless steel. 1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall. Isolated wall is 1,5 mm for 2000 - 4000 Lt capacity tanks and 2 mm for 5000 - 120000 Lt capacity tanks. Cooler unit and tank body are mounted on single chassis. There are 1 0,34 HP 33 d/d redactor ...

  • Peymak - Model 2000 LT - 4000 LT - PHS Horizontal Milk Cooling Tanks

    AISI 304 quality stainless steel. 1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall. Isolated wall is 1,5 mm for 2000 - 4000 Lt capacity tanks and 2 mm for 5000 - 120000 Lt capacity tanks. Cooler unit and tank body are mounted on single chassis. There are 1 0,34 HP 33 d/d redactor ...

  • Fullwood - Model LEM/DX 18000 - 32000 - Milk Cooling Tank

    Horizontal tank with laser welded efficient evaporator. Constructed of stainless steel 18/10-AISI 304. Chassis with solid leg construction and adjustable feet (standard 2 % slope) >Flat manhole and swivelling cover with rubber seal detachable air vent. 2 milk inlet openings, 80 mm (1 in the manhole cover, 1 at the back). Tank outlet 0 80 mm, ...

    By Fullwood Ltd based in Ellesmere, UNITED KINGDOM. from Cooling Product line

  • GEA Farm - Mione Milking Robot 1-Box System

    The number of cows that can be milked per day and box is not dependent on technology alone. There are multiple factors which will significantly influence throughput (or the number of milkings/cow/day). For that reason, it is more logical to determine the capacity of a system by using the number of milkings. As a rule of thumb, 140-170 ...

    By GEA Farm Technologies based in Naperville, ILLINOIS (USA).

  • Automatic Feeding Belt Feeder

    Your introduction to automatic feeding: TMR feeding with the Belt Feeder automated feed distributor is efficient, operator-friendly and especially durable thanks to proven technology. The Belt Feeder feed distributor is the ideal introduction to the concept of automatic feed supply systems. Small, flexible, economical – the combination of ...

    By GEA Farm Technologies based in Naperville, ILLINOIS (USA). from Farm Equipment- Dairy Farming- Automated Feeding Product line

  • Model 2200 Liters - Cheese Vat

    Scherjon Dairy Equipment Holland produces cheese-vat's of various dimensions, depending on the individual needs and cheese production capacity of our customers. This cheese vat has a capacity of 2200 Litres. Our aim is to supply you with a cheese vat that is custom-built. The capacity of the daily processed milk can be adjusted easily by adding ...

    By Scherjon Equipment Holland B.V. based in Surhuisterveen, NETHERLANDS. from Cheese Production Product line

  • Water Sachet / Pouch Machine

    WB USA offers a high quality and reliable water pouch (sachet) filling and packaging machine that is capable of producing between 1500-2200 sachets per hour. It can be adjusted to fill sachets or pouches ranging from 200-500ml.  This pouch packing machine can be used to fill pouches with a wide variety of liquids such as water, juices, wine, ...

    By Water Business USA based in San Marcos, CALIFORNIA (USA). from Commercial Product line

  • Legrain - Model PCI - Computerised Feeder

    The design and operation of the machine gives young animals a natural method of feeding. This machine can feed up to 60 calves in 2 groups with 2 feed stations. With the Legrain PCI you can now feed replacement heifers and bull calves an appropriate individualized diet while remaining in the same group housing. The computer on the Legrain PCI is ...

    By TMF Milk Feeders based in Horsforth, UNITED KINGDOM. from Computerised Feeder Product line

  • Herdflow - Crowd Gate

    The newly developed HERDFLOW Crowd Gate is a robust gate build for large rectangular yards holding a capacity of greater than 300 cows. Like the original Reporoa High Lift Gate, it has some additional features to handle the stress and pressure large herds can impact on your cow flow into the shed. While remaining true to the first backing gate, ...

    By Reporoa Engineering 1982 Ltd based in Rotorua , NEW ZEALAND.

  • Hydraulic Scraper Systems

    Dairypower is the foremost European designer and manufacturer of Automatic Hydraulic Yard Scraper Systems. Our patented scraper system has many unique features that make it the safest and most trouble free system in the world. Scraper systems have traditionally been chain, wire or rope operated. The Dairypower scraper system is hydraulically ...

    By DairyPower Equipment based in Lancashire, UNITED KINGDOM.

  • Model Type VI S - D - Slanting Mixer/Kneader

    The AMK Slanting Mixer/Kneader type VI S - D has pan and mixing blades inclined at 45°. The mixing blades are unilaterally supported. The wellproven sealing element consists of an easily accessible grooved ring. Alternative systems are available for special applications.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you