Only show results in Virginia? Ok

integrated weed control equipment

  • Weed Control System

    Pre-emergent weed-control is the most effective way to manage weeds in vegetable crops, especially in organic farming. The method is well suited to slow-germinating, direct-seeded cultures. Carrots, for example, gain the necessary advance in growth when flame-weeded already before emerging.

    By Kress Umweltschonende Landtechnik GmbH (K.U.L.T.) based in Vaihingen / Enz, GERMANY. from Weed Control System Product line

  • Model AVG 120 - AVG 150 - AVG 200 - Weed cutter

    Height adjustment using extensors with possibility of placing hydraulic cylinder of remote control. Single piece casing of steel sheet. Frame extra-reinforced, integrated to the casing. Compensation parallelogram of the spear hitch. Coupling cardan with clutch. Cardan movements protection and clutch to prevent accidents. Cut minimum of 30 mm. up ...

    By Grosspal - Vialcam S.A. based in Las Varillas, ARGENTINA.

  • John Deere - Model ExactApply - Nozzle Control System

    Spray droplet size is key to effective coverage and precision. It has to be consistent. It has to fit the crop. It has to applied at the right rate and pressure. Now you can choose the right droplet size for your application with ExactApply. The right drops for the right crops. With individual nozzle control, ExactApply delivers the precision at ...

    By John Deere based in Moline, ILLINOIS (USA).

  • Trojan - Band Spayer

    With ever-decreasing herbicide availability and tighter regulations on pesticide residues, weed control in field vegetables is becoming more difficult than ever. The Trojan Bandsprayer helps to meet these challenges by allowing targeted weed control to the most susceptible areas between rows and / or wheelings. Fully adjustable hoods minimise ...

    By Bye Engineering Ltd based in Woodbridge, UNITED KINGDOM.

  • Bye Engineering - Triple Brush Hoe

    With increasingly limited herbicides for vegetable crops and tighter regulations on pesticide residues, weed control is becoming more difficult than ever. The Triple Brush Hoe helps to meet these challenges by offering aggressive weed control between crop rows from a very early crop growth stage. Using existing brush technology mounted on a ...

    By Bye Engineering Ltd based in Woodbridge, UNITED KINGDOM.

  • Kelly Engineering - Disc Mulch Chain

    An innovation unique to Kelly Engineering is our Disc Mulching range of Chains. Designed initially for managing stubble residue, the disc chains are now used for everything from primary tillage to planting poppies. The mulching chains are used with the primary aim of returning crop residue to the soil. They roll down stubble and chop and split it ...

    By Larwoods Ag Services based in Kadina, AUSTRALIA.

  • Mounted Sprayers

    PROFESSIONAL MOUNTED: hot galvanized bent tube frame, polyethylene tank with integrated handwash and washing-circuit, pump with patented system and blueflex® membranes, volumetric control on frame, external intake filter with self-filling valve, hydraulic mixer, rear slides, designed for mechanical or hydraulic weeding bars and other ...

    By G.R. Gamberini SRL based in Castenaso - Bologna, ITALY. from Mounted Sprayers Product line

  • Fischer - Model GL4 & GL5 - Mowers

    The acclaimed Fischer GL4 & GL5 mowers are designed to provide growers with a comprehensive solution for effective, chemical free weed control. The GL4 & GL5 will provide a seamless cut from inter-row to undervine/tree and save time and valuable resources by reducing tractor passes.

    By Fischer Australis Pty Ltd based in Beaconsfield, AUSTRALIA. from Mowers Product line

  • Mais Star - Model MS-SC - Corn Head

    The Mais Star* MS-SC concept relies on the proven Mais Star* design: Two counter-rotating snapping rolls, each fitted with four knife bars, aggressively pull the corn stalks downward in a controlled motion. The integrated horizontal chopper requires a low amount of drive power to shred the gathered corn straw for faster rotting, virtually ...

    By Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG based in Ahlen, GERMANY. from Corn Head Product line

  • Little Wonder - Hydro Brush Cutter

    The Little Wonder Hydro Brush Cutter navigates through weeds, heavy brush and overgrown vegetation with ease. We’ve even cut the cords with solid rod linkage to transmission, park brake and cutter blade clutch for worry-free cutting. Backed by a 2-year warranty.

    By Schiller Grounds Care, Inc based in Southampton, PENNSYLVANIA (USA). from Hydro Brush Cutter Product line

  • Mais Star Horizon - Corn Head

    The Mais Star* Horizon concept relies on the proven design of the Mais Star* models: Two counter-rotating snapping rolls, each fitted with four knife bars, aggressively pull the corn stalks downward in a controlled motion. The integrated horizontal chopper requires a low amount of drive power to shred the gathered corn straw for faster rotting, ...

    By Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG based in Ahlen, GERMANY. from Corn Head Product line

  • Model T610 Series - Star Seeder

    The T610 Series Star Seeder is Gyral's 'big brother' to the legendary TX Model. The robust, trouble free frame construction has been maintained in this series. Excellent weed control and free trash flow is achieved from the tyne layout and design. The features of the T610 start at the tyne assembly. An under frame clearance of 485mm (19'), results ...

    By Gyral Implements based in Toowoomba, AUSTRALIA. from Star Seeder Product line

  • Edenhall - Model 754 - Suger Beet Harvester

    The EDENHALL SEVEN SERIES fully offset, two, three and four row trailed, tanker suger beet harvesters. Using the latest technology to set new standards in ease of operation and quality of harvesting. * Joystick control * Combi-clean System * Large 12 tonne holding tank * A full integrated single unit harvester - a complete lifting system.

    By Edenhall Mek Verkstad AB based in Vallåkra, SWEDEN.

  • Edenhall - Model 753 - Suger Beet Harvester

    The EDENHALL SEVEN SERIES fully offset, two, three and four row trailed, tanker suger beet harvesters. Using the latest technology to set new standards in ease of operation and quality of harvesting.  Joystick control  Combi-clean System Large 12 tonne holding tank.  A full integrated single unit harvester - a complete lifting ...

    By Edenhall Mek Verkstad AB based in Vallåkra, SWEDEN.

  • Model 3130 - Row Crop Cultivators

    Designed with market understanding and field tested know-how, the 3130 is versatile, featuring a higher clearance tool bar and a variety of gang configurations designed for use in corn, cotton, vegetables or sugar beets. It has a close-coupled gang design putting the working tools forward under the tool bar for maximum control. And the single ...

    By Alloway Standard Industries based in Fargo, NORTH DAKOTA (USA). from Row Crop Cultivators Product line

  • Dücker - Model MBM 400 - Embankment Mower

    The embankment mower MBM is specially-designed for front-mounting on local carrier or tractor of the 80 HP-class (approx. 6 tons). The power of the working equipment be provided by in the device integrated hydraulic system, which is driven by the PTO-shaft, or the hydraulic system of the carrier vehicle will be used. The basic unit serve for ...

    By Gerhard Dücker GmbH & Co. KG based in Stadtlohn (DE), GERMANY. from Embankment Mower Product line

  • Euro Tiger - Model V8-4 - Harvesting Machine

    Cabin: The ‘euro-cabin’ offers easy working conditions and an ergonomically arranged workplace. It offers a good all-round view, especially over the topping and lifting units, because of the purpose-designed cabin. Control: Computer aided control ensures optimum efficiency. This also gives excellent manoeuvrability for driving on ...

    By ROPA North America based in Wyoming, ONTARIO (CANADA).

  • Slantrange - Model 3PX - Multispectral Imaging System

    Our 3PX multispectral imaging system brings all the sensing and analytics power of our 3P but with new levels of aircraft integration for improved reliability and efficiency, powered by DJI SKYPORT.

    By Slantrange, Inc based in San Diego, CALIFORNIA (USA).

  • Model 9500T - Pull Type Sprayers

    FAST offers a Hydraulic AutoYaw cushioning system that is controlled through an ISO compatible display (2630/Pro 700,ect.). This system has sensors that are mounted to the center section and senses at all times what the position of each wing is. If the wing starts moving forward or rearward due to a sudden start, stop, turn, ect., the sensor will ...

    By Fast Manufacturing, Inc based in Windom, MINNESOTA (USA). from Pull Type Sprayers Product line

  • Drip Irrigation Systems

    Now drip watering for your container plants, roses and seasonal color can be added to your existing sprinkler system. During hot weather, potted plants require constant care. And the traditional method of hose watering often results in “drench and drought” conditions that make for sickly plants. Our technicians can run small drip tubes ...

    By Rain Rich Lawn Sprinklers based in Greenlawn, NEW YORK (USA). from Drip Irrigation Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you