Irrigation Data equipment | agriculture-xprt.com

Premium

Delta-T - Model GP1 - General Purpose Irrigation Data Logger

The GP1 Data Logger is a complete logging solution housed in a waterproof IP67 enclosure with battery power. The internal memory can hold >600,000 readings – more than enough for one year’s operation (typical).

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Irrigation Monitoring and Horticulture Monitoring Product line

Irrigation Advice - - Agricultural Irrigation Data

Water is one of the most important factors in crop growth. To optimize yields this occasionally necessitates the irrigation of crops during the growing season. The Dacom Irrigation Advice module shows what the daily water consumption of the crop has been throughout the different soil layers and gives you advice on the optimal timing and amount of ...

By Dacom based in Emmen, NETHERLANDS.

Premium

Delta-T - Model GP1 - General Purpose Data Logger

The GP1 Data Logger is a complete logging solution housed in a waterproof IP67 enclosure with battery power. The internal memory can hold >600,000 readings - more than enough for one year's operation (typical).

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Data Loggers Product line

Premium

Delta-T - Model GP2 - Advanced Data Logger and Controller

The GP2 is a powerful 12 channel data logger that is easy to use, versatile, rugged and reliable. It can log most sensor types and accepts voltage, resistance, current, potentiometer, bridge, counter, frequency, and digital state inputs. DeltaLINK software helps the user set up logging sequences and provides control over reading frequency, sensor ...

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Data Loggers Product line

Premium

Delta-T - Model SM150T - Soil Moisture and Temperature Sensor (for Horticulture)

***New Sensor for 2017*** Stable and accurate (± 3%) - Robust and buriable with 5 year warranty* - Ideal for substrate monitoring - Built-in temperature sensor.The new SM150T is an affordable soil moisture and temperature sensor that is ideal for system integrators The SM150T is the perfect sensor for a wide range of applications in horticulture ...

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Irrigation Monitoring and Horticulture Monitoring Product line

Premium

Delta-T - Model WET-2 - WET Sensor

The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the plant.

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Irrigation Monitoring and Horticulture Monitoring Product line

H2 - Model R700 HYDRO - Irrigation Controller

Hydroponic controller specifically designed for closed and/or recirculation systems. This unit uses Electric Conductivity (EC) and pH to control fertilizer dosage in the nutrient solution. These units fit to perfection for pure based systems or substrate based systems with recirculation. Our irrigation controllers are the result of 10 years of ...

By H2 Hydroponics based in SPAIN. from Irrigation Product line

McCrometer McMag 3000

McCrometer's award-winning Mc Mag5000 provides growers and irrigators with a new alternative for flow measurement. With a guaranteed 5-year battery life and saddle mount design, the Mc Mag3000 delivers the dependability and ease-of-installation McCrometer has provided to the agricultural market for nearly 60 years. The electromagnetic sensor ...

By The Avanti Company based in Avon Park, FLORIDA (USA). from Irrigation Flow Meters Select Data Sheets Product line

McCrometer MF100

The Model MF100 is designed to provide high pressure rating and excellent meter accuracy in an inexpensive package. Model MF100 meters are manufactured to comply with the applicable provisions of the American Water Works Association Standard No. C704-02, and latest revision for propeller type flowmeters. The model MF100 is designed for a maximum ...

By The Avanti Company based in Avon Park, FLORIDA (USA). from Irrigation Flow Meters Select Data Sheets Product line

McCrometer MW500

Model MW500 and MZ500 Main Line Propeller Flowmeters are manufactured to comply with the applicable provisions of the American Water Works Association Standard No. C704-02 for propeller type flowmeters. The model MW500 is designed for a maximum continuous working pressure of up to 150 psi and is fitted with AWWA Class D flanges. The model MZ500 is ...

By The Avanti Company based in Avon Park, FLORIDA (USA). from Irrigation Flow Meters Select Data Sheets Product line

Roll Cylindrical Dripline System

Rolls are available as specified in the following table, only for 16 mm diameter, complete with the full range of drippers and nominal flow rates envisaged for the agriculture line, referred to for the technical data. On request, supplied in brown. There are rolls of 200 and 500 m, only for Dual Drip D16 mm 8 mils with the full range of drippers ...

By Soaplast srl based in Regalbuto, ITALY. from Garden Irrigation Product line

Flat Dripline

There are rolls of 200 and 500 m, only for Dual Drip D16 mm 8 mils with the full range of drippers and nominal flow rates, and spacing standards listed in the table. For technical data, please refer to the ‘agriculture’ line.

By Soaplast srl based in Regalbuto, ITALY. from Garden Irrigation Product line

Bluelab Guardian - Model 100128 - pH Conductivity and Temperature Readings Meter

Stay connected 24/7. Monitor, data log and remotely view pH, conductivity and temperature readings. The Bluelab Guardian SmartBee Connect is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does ...

By SmartBee - Swarm Technologies LLC based in Las Vegas, NEVADA (USA). from Irrigation Controls Product line

Cylindrical Dripline Rolls

Rolls are available as specified in the following table, only for 16 mm diameter, complete with the full range of drippers and nominal flow rates envisaged for the agriculture line, referred to for the technical data. On request, supplied in brown.

By Soaplast srl based in Regalbuto, ITALY. from Garden Irrigation Product line

Flat Dripline

There are rolls of 200 and 500 m, only for Dual Drip D16 mm 8 mils with the full range of drippers and nominal flow rates, and spacing standards listed in the table. For technical data, please refer to the ‘agriculture’ line.

By Soaplast srl based in Regalbuto, ITALY. from Garden Irrigation Product line

Master - Model Mm2-mp - Irrigators with Pump

Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr. Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground ...

By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pumps Product line

HD PE Irrigation Pipes

Technical Data: Raw material - HD PE for water. Outer color - Brown, purple, white, green and more, with a black inner layer. Printed marks – According to standards and customer’s specifications, Packaging –Rolls or metal drums in various lengths. Connectors – Mechanical, inner welding, ...

By Metzerplas based in M.P. Hefer, ISRAEL. from Irrigation Pipes Product line

Master - Model MF3-mp - Irrigators with Pump

Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr. Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish. Model with hot galvanised ground ...

By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pumps Product line

Master - Model MF3-mp - Irrigators with Pumps

Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr.Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish.Model with hot galvanised ground support ...

By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pumps Product line

Model GG-004 Series - Solar Powered Moisture Based/Timer Auto Irrigation System

Advanced Moisture-Controlled Solar-Powered auto irrigation systems GG-004 can control up to 4 valves.When at moisture based mode, the moisture sensor periodically collect moisture samples from the field to the controller. The controller will do analysis and decide to open/close the valve if need.When first zone is be

By ANC Technology based in Moorpark, CALIFORNIA (USA). from Irrigation Controller Product line

Add Supplier Profile