Irrigation Flow Equipment
-
based in USA
The Baseline PFS Series Flow Sensors have a unique low drag, a lightweight impeller design, and a specially engineered tee cavity and impeller placement to ensure smooth flow and precise performance at the lowest flow rates. Every Baseline PFS Series Flow Sensor is two-wire ready with a Flow biCoder built into ...
-
based in USA
Baseline’s BFM Series Flow Meters are small, rugged, and highly reliable flow meters that are Baseline two-wire ready. The flow meter is available in 3/4” to 1 1/2” pipe sizes. The K and Offset values are preconfigured in the flow ...
-
Manufactured by SeaMetrics, Inc.based in USA
these adjustable insertion turbine flow sensors a wide flow range and long life. A sensor detects the passage of miniature magnets in the rotor blades. The resulting square-wave signal can besentfor hundreds of feet without a transmitter, over unshielded cable. This signal can be connected directly to many PLC's and other controls without any ...
-
Manufactured by Drip Research Technology Services (DRTS)based in USA
DRTS FT-10 automatically tests 10 drip samples at desired test pressures. Tests are fully configurable for up to 25 test pressures including a test for anti drain (CNL, ND) drippers. Simply Connect the samples, choose one of the tests, and minutes later you have all of the relevent datafor the dripper samples including flow rate, CV, ...
-
Manufactured by SeaMetrics, Inc.based in USA
these adjustable insertion turbine flow sensors a wide flow range and long life. A sensor detects the passage of miniature magnets in the rotor blades. The resulting square-wave signal can besentfor hundreds of feet without a transmitter, over unshielded cable. This signal can be connected directly to many PLC's and other controls without any ...
-
Manufactured by SeaMetrics, Inc.based in USA
The TX800-Series are insertion turbine meters designed for use in 1-1/2' to 8' pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC. sensor bodies are machined from solid rod for maximum low-flow performance.TheTX800-Series use special fittings thatensure ...
-
Manufactured by Anhui FLT Filtering System Co., Ltdbased in CHINA
G500-EL solenoid valve is a hydraulic on-off valve operated by pipeline pressure. It adopts an external 3-way electromagnetic pilot valve, which is remotely controlled by current signal to ensure the normal opening and closing of the valve. Through the controller, delay switch, converter and PLC controller to control the switching current signal of the solenoid valve. The opening and closing ...
-
Manufactured by Hortaubased in CANADA
Hortau Irrigation Management Specialist about the benefits of Hortau flow-meter monitoring. Hortau’s latest-generation smart irrigation management systems allow for up to eight sensor inputs, which can include weather stations, pyranometers, diesel engine controls, relays, valve controllers, pressure sensors, switches, tipping buckets, ...
-
Manufactured by Drip Research Technology Services (DRTS)based in USA
Agtera is a low flow emitter specially developed for well water agriculture applications where there is a high degree of suspended solids. It employs an extra-large flowpath cross-section, a very long Omniflow labyrinth, and an elevated filter, which combine to create an agricultural dripper with unparalleled clogging ...
-
Manufactured by Ningbo Huntop Holdings Co., Ltd.based in CHINA
Gravity Drip Irrigation System Dripline Kit Huntop Supplier China, sub-surface vegetable drip Irrigation system, Gravity Flow & Rain Barrel Drip Irrigation Systems, small scale Drum and Drip Irrigation, bucket drip system and vegetable growing project, Family drip System Kit Itm No.: HT1108The drip ...
-
Manufactured by SeaMetrics, Inc.based in USA
The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 3' to 12' pipe. With no moving parts, these meters provide unobstructed flow and are resistant to wear from debris found in ground or surface water. Little maintenance is required because there are no bearings to wear out or propellers to stop ...
-
Manufactured by Ecomatikbased in GERMANY
Sap flow sensors are used to continuously measure water uptake in woody plants. It indicates if it is necessary to adapt the irrigation control. The SF-G model corresponds to the classic, two-needle model developed in 1985 by André Granier. ...
-
Manufactured by EveryDrop Technologiesbased in USA
Model 1004-EX is a 1” vortex irrigation flow meter that provides highly accurate, real time flow monitoring. It features a display and has a 2 wire interface with shared power and pulse signal. (Compatible with other meters on the market) This model comes with upstream straight length and unions for easy ...
-
Manufactured by Sparling Instruments, LLCbased in USA
This meter's saddle design allows the meter to be used on existing piping and in many cases these robust irrigation flow meters can replace other saddle flow meters. Sparling’s irrigation saddle flowmeters feature cast saddles and gear boxes making them robust and reliable. The simple and rugged design ensures that the ...
-
Manufactured by Innoquest Inc.based in USA
Quickly and accurately check irrigation nozzle flow and regulator function, pump flow, and safety showers up to 44 ...
-
Manufactured by Scova Impianti s.r.l.based in ITALY
Micro irrigation low-flow rate system with low operating pressure. It allows watering to be localised close to the roots and its self-compensating version ensures smooth watering even on long ...
-
Manufactured by Gavishbased in ISRAEL
Irrigation flow up to 150 m3/hour. Activates 1 to 300 valves. Computerized operation – local or using PC. EC and pH control. 35 Irrigation Programs. 10 Fertilization Programs. 3 to 6 Venturi Injectors, 350 to 1000 Liter/hour. Stainless Steel Booster Pump. Fertilizer Counter for each Injector. Visual flow Meter for each ...
-
Manufactured by Gavishbased in ISRAEL
Irrigation flow up to 25 m3/hour. Activates 1 to 10 valves. Computerized operation – local or using PC. EC and pH control. 15 Irrigation Programs. 10 Fertilization Programs. 3 to 4 Venturi Injectors, 350 to 400 Liter/hour. Stainless Steel Booster Pump. Visual flow Meter for each Injector. Hydrometer and Control ...
-
Manufactured by Urban Crop Solutionsbased in BELGIUM
The FarmFlex features a growing surface of up to 55 m2 (592 sq. ft.), and offers larger flexibility in crop mix, as the centre corridor allows immediate access to all plants. The farm works with an ebb & flow irrigation system on growing benches and is completely built with stainless steel. This traditional design, a standard in the ...
-
Manufactured by Gavishbased in ISRAEL
Irrigation flow up to 40 m3/hour. Activates 1 to 300 valves. Computerized operation – local or using PC. EC and pH control. 35 Irrigation Programs. 10 Fertilization Programs. 3 to 4 Venturi Injectors, 350 to 400 Liter/hour. Stainless Steel Booster Pump. Fertilizer counter for each Injector. Visual flow Meter for each ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you