Only show results in Virginia? Ok

irrigation flow meter Equipment

  • Model BFM Series - Irrigation Flow Meters

    Baseline’s BFM Series Flow Meters are small, rugged, and highly reliable flow meters that are Baseline two-wire ready. The flow meter is available in 3/4” to 1 1/2” pipe sizes. The K and Offset values are preconfigured in the flow meters

    By Baseline Inc based in Boise, IDAHO (USA).

  • Bell Flow - Model Delta SDC - Irrigation Water Meter (Cold) Dry Dial Flanged PN16

    Model: Delta. ~ suitable for sandy/dirty irrigation water. Meter Type: Paddle Wheel - under-shot design. Qmin 4 m3/hr Qn 50 m3/hr Qmax 100 m3/hr. Dial Type: Super-Dry Dial (frost resistant). Meter Body Material Cast Iron- epoxy coated . Drinking water approved (75/33/EEC). Accuracy- Class A. Installation Horizontal or Vertical. Connections DIN ...

    By Bell Flow Systems Ltd. based in Buckingham, UNITED KINGDOM. from Water Meters Product line

  • Premium

    Irritec - Model Commander Evo Basic - Irrigation Programmer

    The basic version of our programmers. Up to 208 valves divided into 64 separate blocks.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Irrigation Automation Product line

  • Premium

    Irritec Commander - Model EVO Gold - Irrigation Programmers

    The option of radio remote control, management software with internet access via modem and the arrangement of receiver sensors make the new Commander EVO range of programmers for agriculture a completely new product.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Irrigation Automation Product line

  • Premium

    Irritec Commander - Model EVO Plus - Irrigation Programmer

    Compared with the Gold, this programmer can handle up to 6 fertilisers, with 24 vac, 12v dc and 9-12v dc latching relay outlets.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Irrigation Automation Product line

  • Model E-Z Meter - Irrigation Injection Pumps

    Our fertilizer injection pumps and chemical injection pumps are available in both simplex and duplex models for your advanced fertigation and chemigation needs. All wetted internal parts exposed to chemicals and fertilizers are made from 316 stainless steel, chemically resistant polypropylene and the highest quality seals available today.

    By CDS-John Blue Company based in Huntsville, ALABAMA (USA). from Industrial Pumps Product line

  • Model WMP-Series - Plastic-Bodied Magmeter

    The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1, 2 and 3 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals and fertilizers. It is light weight and easy to install or remove from the pipe for inspection*. With no moving ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Product line

  • T&L Irrigation Systems

    T-L is a major manufacturer of hydraulically powered pivot irrigation systems that undergo thousands of hours of product research and testing for quality and performance. T-L’s hydrostatic drive offers many features not available on electric pivots. Unlike the stop-and-go action of electric models, e

    By Unifer International GmbH based in Elmenhorst, GERMANY. from Irrigation Product line

  • McCrometer McMag 3000

    McCrometer's award-winning Mc Mag5000 provides growers and irrigators with a new alternative for flow measurement. With a guaranteed 5-year battery life and saddle mount design, the Mc Mag3000 delivers the dependability and ease-of-installation McCrometer has provided to the agricultural market for nearly 60 years. The electromagnetic sensor ...

    By The Avanti Company based in Avon Park, FLORIDA (USA). from Irrigation Flow Meters Select Data Sheets Product line

  • McCrometer MW500

    Model MW500 and MZ500 Main Line Propeller Flowmeters are manufactured to comply with the applicable provisions of the American Water Works Association Standard No. C704-02 for propeller type flowmeters. The model MW500 is designed for a maximum continuous working pressure of up to 150 psi and is fitted with AWWA Class D flanges. The model MZ500 is ...

    By The Avanti Company based in Avon Park, FLORIDA (USA). from Irrigation Flow Meters Select Data Sheets Product line

  • McCrometer MF100

    The Model MF100 is designed to provide high pressure rating and excellent meter accuracy in an inexpensive package. Model MF100 meters are manufactured to comply with the applicable provisions of the American Water Works Association Standard No. C704-02, and latest revision for propeller type flowmeters. The model MF100 is designed for a maximum ...

    By The Avanti Company based in Avon Park, FLORIDA (USA). from Irrigation Flow Meters Select Data Sheets Product line

  • Model AG2000 - Irrigation Magmeter

    The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 4” to 10” pipe. With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in ground or surface water. There are no bearings or propeller to wear out. Minimal straight pipe requirements allow AG2000 ...

    By Dynotek Fluid Data Management based in Arvada, COLORADO (USA). from Pipeline Flow Measurement Product line

  • Model Enduro Meter Series - Industrial Applications

    When it comes to high flow applications the Enduro meter from Metron-Farnier will handle the job. The Enduro Meter is a precisely engineered measuring device, which suspends a small Spectrum Meter in a meticulously designed meter body.

    By Metron Farnier, Inc. based in Boulder, COLORADO (USA).

  • Continental - Model A-1100 - Flow Master

    We offer NH3 (anhydrous ammonia) irrigation meters in the standard #A-1100 Flow-Master, the A-1100-A Flow Master Kit & irrigation meter accessories. Catalog #A-1100 Flow-Master is a device to control the flow of NH3 for irrigation application. A controlled flow is accomplished by means of a nylon disc containing a series of 24 different sized ...

    By Continental NH3 Products Co., Inc based in Dallas, TEXAS (USA). from Flow Control Meters & Manifolds Product line

  • Zimmatic - Model 7500P - Small-Field Pivot

    The 7500P Small-Field Pivot gives growers new options to cost-effectively irrigate smaller fields up to 60 acres. The 7500P’s smaller diameter pipeline of 11.4 cm and crop clearance of 10.5 ft. (3.2 meters) offers the height needed to irrigate taller crops, but still provides the strength you’ve come to expect from Zimmatic irrigation ...

    By Koviack Irrigation and Farm services based in Three Rivers, MICHIGAN (USA). from Irrigation Systems Product line

  • AgroBee - Radio Systems

    AgroBee is a radio system for the fertigation controllers Agrónic 2500 and Agrónic Bit. AgroBee radio modules allow the activation of valves and other irrigation elements, as well as sensors and meters reading, achieving radio coverage up to 800 m or up to 1600 m with repeater, with very low power consumption and in accordance with ...

    By Sistemes Electrònics Progrés S. A. based in Bellpuig, SPAIN. from Irrigation Telemanagement Product line

  • Greencrop - Pump Sets for Irrigation

    With the legislation of exhaust emissions on engines bringing static engines to comply with tier III turbo market, we have kept with Iveco using their New Iveco Industrial N45MSTX20 Tier III 93kW (126hp) 4 cyl Turbo after cooled engine. This engine has a balanced crank shaft (not all engines have) semi-electronic (this suits static engines better) ...

    By Greencrop Irrigation based in KING`S LYNN, UNITED KINGDOM. from Irrigation Pumps Product line

  • Model CZWI - Water Meter For Irrigation

    Equipments specially designed for irrigation and waste water metering containing impurities ( medium size stones, branches, etc.). Usually working under high flow volume regimes, long periods of empty pipes, high pressure variation in the network and meters installed at difficult access installations. It includes a system of plastic (polystyrol) ...

    By CONTAZARA S.A based in Zaragoza, SPAIN.

  • Model Ti-240 - Two-Wire Controllers

    Operate up to 640 valves Up to 60 independent programs. Run 16 valves in parallel as standard. Run single cable lengths up to 5km 

    By Heron Electric Company Ltd. based in Ford, UNITED KINGDOM. from Irrigation Controllers Product line

  • Chemilizer - Proportional Liquid Chemical Injector

    The Chemilizer is a proportional liquid chemical injector that injects a precise amount of chemical in proportion to a volume of water. The Chemilizer is an industry-leading chemical injector that utilizes years of proven diaphragm technology. Powered by the existing water supply, the internal motor drives the chemical pump, injecting very precise ...

    By Hydro Systems Company - a Dover Company based in Cincinnati, OHIO (USA). from Irrigation & Horticulture Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you