Show results for
Refine by
Irrigation Flow Meters Equipment & Supplies
16 equipment items found
Manufactured by:SeaMetrics, Inc. based inKent, WASHINGTON (USA)
The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 3' to 12' pipe. With no moving parts, these meters provide unobstructed flow and are resistant to wear from debris found in ground or surface water. Little maintenance is required because there are no bearings to wear out or propellers to stop turning. ...
by:HydroPoint Data Systems, Inc. based inPetaluma, CALIFORNIA (USA)
Baseline’s BFM Series Flow Meters are small, rugged, and highly reliable flow meters that are Baseline two-wire ready. The flow meter is available in 3/4” to 1 1/2” pipe sizes. The K and Offset values are preconfigured in the flow ...
Manufactured by:EveryDrop Technologies based inLongmont, COLORADO (USA)
Model 1004-EX is a 1” vortex irrigation flow meter that provides highly accurate, real time flow monitoring. It features a display and has a 2 wire interface with shared power and pulse signal. (Compatible with other meters on the market) This model comes with upstream straight length and unions for easy ...
Manufactured by:Sparling Instruments, LLC based inEl Monte, CALIFORNIA (USA)
This meter's saddle design allows the meter to be used on existing piping and in many cases these robust irrigation flow meters can replace other saddle flow meters. Sparling’s irrigation saddle flowmeters feature cast saddles and gear boxes making them ...
Manufactured by:Drip Research Technology Services (DRTS) based inSan Diego, CALIFORNIA (USA)
DRTS FT-10 automatically tests 10 drip samples at desired test pressures. Tests are fully configurable for up to 25 test pressures including a test for anti drain (CNL, ND) drippers. Simply Connect the samples, choose one of the tests, and minutes later you have all of the relevent datafor the dripper samples including flow rate, CV, temperature, pressure etc. in an excel file. The FT-10 has a ...
Manufactured by:Smart Farm Systems, Inc. based inNicholasville, KENTUCKY (USA)
Our flow meter is specifically designed for irrigation well monitoring. This flow meter comes with a saddle, allowing it to be installed directly on the well discharge pipe. Pipe diameter must be specified at the time of order. With a flow meter in place the Smart Farm system can ...
Manufactured by:SeaMetrics, Inc. based inKent, WASHINGTON (USA)
The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide ...
Manufactured by:SeaMetrics, Inc. based inKent, WASHINGTON (USA)
The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide ...
by:HydroPoint Data Systems, Inc. based inPetaluma, CALIFORNIA (USA)
The FlowStation is a powerful shared flow controller that allows up to 30 BaseStation 3200 irrigation controllers to share water resources. Whether you have one large mainline across a property, or you are combining controllers across multiple mainlines, the FlowStation offers the features and flexibility to tackle the ...
Manufactured by:COMAC CAL s.r.o. based inTerlicko, CZECH REPUBLIC
The FLOW 45 is a sophisticated battery powered magnetic flow meter that ensures exceptional accuracy and reliability, particularly in areas lacking mains power. Utilizing the principle of electromagnetic induction, the FLOW 45 measures flow rates by detecting voltage changes induced by conductive liquids moving ...
by:HydroPoint Data Systems, Inc. based inPetaluma, CALIFORNIA (USA)
The Baseline PFS Series Flow Sensors have a unique low drag, a lightweight impeller design, and a specially engineered tee cavity and impeller placement to ensure smooth flow and precise performance at the lowest flow rates. Every Baseline PFS Series Flow Sensor is two-wire ready with a Flow biCoder built into the tee insert. Because a Flow biCoder is built into each flow sensor, every device ...
by:HydroPoint Data Systems, Inc. based inPetaluma, CALIFORNIA (USA)
The Baseline BFS Brass Flow Sensor has a unique low drag, a lightweight impeller design, and a specially engineered tee cavity and impeller placement to ensure smooth flow and precise performance at the lowest flow rates. Every Baseline BFS Series Flow Sensor is two-wire ready with a Flow biCoder built into the tee insert. Because a Flow biCoder is built into each flow sensor, every device ...
Manufactured by:Mapsens by TYC GIS Soluciones Integrales SL based inMadrid, SPAIN
The SensAgro A-3 is an advanced sensor system designed specifically for agriculture applications. It integrates flow measurement capabilities with its predecessors' environmental monitoring functions. The device features a flow sensor, or flowmeter, which measures the volume of liquid passing through a pipe over a specified time during irrigation. This enables detailed analysis of irrigation ...
Manufactured by:Spagnol srl based inVidor (TV), ITALY
For the fertigation of cultivations, we realized Dosamix, a fertigation dosing unit for soilless cultivations with dosage in mixing tank. Bravomix can be configured with a horizontal or vertical axis pump and it is possible to install a variable speed drive on it, thanks to which each irrigation zone can be irrigated at the desired pressure. Every project has its own peculiarity, for this reason ...
Manufactured by:Spagnol srl based inVidor (TV), ITALY
For the fertigation of cultivations, we realized Bravomix, a fertigation dosing unit for soilless cultivations with dosage in mixing tank. Bravomix can be configured with a horizontal or vertical axis pump and it is possible to install a variable speed drive on it, thanks to which each irrigation zone can be irrigated at the desired pressure. For closed loop irrigation systems, Bravomix can be ...
Manufactured by:SeaMetrics, Inc. based inKent, WASHINGTON (USA)
The TX800-Series are insertion turbine meters designed for use in 1-1/2' to 8' pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC. sensor bodies are machined from solid rod for maximum low-flow performance.TheTX800-Series use special fittings thatensure ease of installation and correct depth setting in the ...