Only show results in Virginia? Ok

Irrigation Pump Control equipment

  • Aquaterr - Remote Irrigation Pump Control Kit

    The Aquaterr Remote Pump Control Kit moves water wirelessly, interfacing your existing reservoir sensor to your existing pump. Lowest cost to automate. No wires to dig and bury, and no consideration of terrain results in faster installation at a lower cost with excellent return on investment.

    By Aquaterr Instruments & Automation, LLC based in Costa Mesa, CALIFORNIA (USA). from Others Product line

  • Premium

    Irritec - Impact Sprinkler Irrigation System

    In every situation – open field, orchard, vineyard or greenhouse – Irritec has designed the best irrigation system to meet your needs. To find out more, our sales team is happy to respond to your individual requirements.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Irrigation Sprinklers Product line

  • Premium

    Irritec - Model Frogger - Sprinkler Irrigation

    Lowers air temperatures. An efficient mister system can reduce greenhouse temperatures by 4-6 degrees C, depending on external conditions, i.e. outdoor temperature and humidity.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Irrigation Sprinklers Product line

  • Premium

    Irritec - Mini Sprinkler Irrigation

    The next phase in the evolution of traditional irrigation away from high-capacity, high-pressure large jet sprayers, increasingly impractical today due to their damaging effects on crops and the environment.

    By IRRITEC SpA based in Capo d’Orlando, ITALY. from Irrigation Sprinklers Product line

  • TEI Controls - Drip Irrigation Control Panel

    The TEI Controls Drip Irrigation Control Panelis designed to provide programmable control of up to 30 irrigation zones, backwash control of up to 10 filters, and motor control for 2 pumps. The system employs a programmable logic controller with a color touch screen Operators Interface Console, housed in a Nema 4X fiberglass enclosure. Single-phase ...

    By TEI Controls (TT) based in Cedar Park, TEXAS (USA).

  • Pumpset - Model CR - Nutrient Control System

    Zwart Systems has built a custom fertilizer injection pumpset for virtually every flow range and every crop imaginable in it’s long history of irrigation design. From small 40GPM systems to 700GPM vegetable range units, we’ve done them all.

    By Zwart Systems based in Beamsville, ONTARIO (CANADA). from Irrigation Product line

  • Model INTS-01 - Light Sum Controller

    INTS-01 : When the light sum reaches a programmed value, a relay is closed to activate a pump or an irrigation valve for a programmable time in minutes and seconds. When the number of valves is more than one, the controller can be connected to an Agricontrol irrigation programmer (IP-xx) to start an irrigation program.

    By Agricontrol Snc based in Albenga (SV), ITALY. from Irrigation Control Product line

  • TIGERFLOW - Commercial and Industrial Irrigation Booster System

    TIGERFLOW’S JUNGLECAT is a commercial and industrial irrigation booster system ideal for landscaping.

    By TIGERFLOW Systems, Inc. based in Dallas, TEXAS (USA). from Irrigation Product line

  • Model X-IP - Small Irrigation Programmers System

    X-IP : Small Irrigation programmers for 2 valves+pump or 3 valves. For every valve programmable time in minutes and seconds. 4 irrigation programs. 5 daily start times per program. Cyclic irrigation: programmable pause between two cycles. Water budget. It does not lose time and programs in absence of power.

    By Agricontrol Snc based in Albenga (SV), ITALY. from Irrigation Control Product line

  • Model MCI B60 - Battery Powered Controllers

    The Heron MCI B60 controller provides an ideal solution for the irrigation of large areas where there is no mains power. Applications include landscape irrigation and farming. The controller is powered from either a solar panel or a 12V DC supply. A single two wire cable is laid throughout the area to be irrigated. Latching solenoid valves are ...

    By Heron Electric Company Ltd. based in Ford, UNITED KINGDOM. from Irrigation Controllers Product line

  • T&L Irrigation Systems

    T-L is a major manufacturer of hydraulically powered pivot irrigation systems that undergo thousands of hours of product research and testing for quality and performance. T-L’s hydrostatic drive offers many features not available on electric pivots. Unlike the stop-and-go action of electric models, each tower on a T-L system move ...

    By Unifer International GmbH based in Elmenhorst, GERMANY. from Irrigation Product line

  • Master - Model MDt8-MP - Irrigators with Pump

    Turbine drive, the patented 'Turbimec' system, interchangeable for flows of 10 to 130 m³/hr.Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint with a low content of solvents is applied before being treated in the oven for a super finish.Model with hot galvanised ground support ...

    By IRRIMEC s.r.l. based in CALENDASCO (Piacenza), ITALY. from Irrigators with Pumps Product line

  • Greencrop - Pump Sets for Irrigation

    With the legislation of exhaust emissions on engines bringing static engines to comply with tier III turbo market, we have kept with Iveco using their New Iveco Industrial N45MSTX20 Tier III 93kW (126hp) 4 cyl Turbo after cooled engine. This engine has a balanced crank shaft (not all engines have) semi-electronic (this suits static engines better) ...

    By Greencrop Irrigation based in KING`S LYNN, UNITED KINGDOM. from Irrigation Pumps Product line

  • SIL - Model 150 - Irrigation Attended Start Pump Control Panels

    High Grade OFF-ON and START Pushbutton, Pump Pressure Switch Gauge, Oil Pressure, Engine Temperature Gauges, Alternator Charge Warning Lamp, Fault Shutdown Lamp, Full Engine Harness & Sensors, Front Panel Circuit Breaker

    By Specialist Instruments Ltd. based in Wiltshire, UNITED KINGDOM. from Diesel Irrigation Pump Panels Product line

  • Munro - Model PRO II - Centrifugal Turf Irrigation Pumps

    Finally, there's a better way to install an irrigation pump. So many things to remember: fittings, gauges, controls, wiring. Plus the materials to build a pump house. There’s room for errors, leaks, and even safety violations. Many hand-made installations fail prematurely. We made it easy. We’ve taken all of the pieces and parts and ...

    By Munro Companies based in Grand Junction, COLORADO (USA). from Pump Product line

  • Mastia Riego - Irrigation Controller

    This equipment is an irrigation controller configurable, therefore It can be adapted to different kind of installations, it is able to control: 16 start programs with 8 valve groups each program. 99 irrigation valves. 9 fertilizers. 9 fertilizer dosing channels with possibility of automatic injectors back wash. 9 irrigation pumps. 27 ...

    By Nutricontrol, S. L. based in Cartagena, SPAIN. from NTC Irrigation Product line

  • Model MC-E Series - Irrigation Controllers

    The MC-E Series of irrigation controllers have advanced features designed for valve and pump control applications in agricultural drip irrigation. The MC-E Series controllers have a looping feature to reliably control misting, cooling and fogging in greenhouse and nursery applications. New flow monitoring and diagnostic features detect unscheduled ...

    By The Toro Company based in El Cajon, CALIFORNIA (USA). from Agriculture- Controllers Product line

  • T-L Irrigation - Center Pivot

    Highly experienced center pivot engineers whose mission is to provide simplicity, efficiency, exceptional performance and longevity design T-L’s center pivot irrigation systems. Our hydrostatic center pivot drives use the same hydraulic components growers are familiar with in other farming equipment, thus not requiring specialists to ...

    By T-L Irrigation Company based in Hastings, NEBRASKA (USA).

  • Mastia Hidro - Model 3k - Robust Fertirrigation Controller

    The Mastia Hidro 3k is a robust fertirrigation controller to manage 1 water system, it is able to control: 24 irrigation programs with 10 valve groups each program. . 24 valve groups. 24 recipes. 24 irrigation valves. 5 fertilizers and 1 acid. 2 irrigation pumps. 5 auxiliary pumps. 5 blowers/agitators. 5 filters. Maximum and minimum alarm of pH ...

    By Nutricontrol, S. L. based in Cartagena, SPAIN. from NTC Irrigation Product line

  • Mithra - Model Pro 3k - Robust Fertirrigation Controller

    The Mithra Pro 3k is a robust fertirrigation controller to manage 3 water systems, it is able to control: 50 irrigation programs with 10 valve groups each program. 50 valve groups. 30 recipes. 10 drainage trays. 200 irrigation valves. 9 fertilizers and 1 acid. 9 irrigation pumps. 27 auxiliary pumps. 27 blowers/agitators. 20 filters. 6 mixing ...

    By Nutricontrol, S. L. based in Cartagena, SPAIN. from NTC Irrigation Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you