Show results for
Refine by
Irrigation Soil Moisture Monitoring Equipment & Supplies
9 equipment items found
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Watermark monitor. Complete set for automatic logging of soil moisture data, consisting of datalogger, 7 Watermark sensor (5x with 6 m cable and 2x with 10 m cable), temperature sensor, software and RS232 communication cable. Inclusive quick connectors and pvc installation pipe. ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
Manufactured by:Vienna Scientific Instruments GmbH (VSI) based inAlland, AUSTRIA
Agriculture and pristine ecosystsms worldwide are already experiencing more frequent hot spells with low precipitation. As a result of impending climate change, droughts are expected to intensify in Austria, Europe and ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...