Irrigator Equipment In Ecuador
-
Manufactured by Irtec S.p.A.based in ITALY
Simple and immediate coverage of irrigation needs. Water supply is possible by hose or by canal. Used on rectangular farms, self-propelled booms with central drive ...
-
Manufactured by Irtec S.p.A.based in ITALY
When to irrigate at 360 ° is not a figure of speech. The system designed to irrigate large extensions in complete autonomy. Available in three versions, with water supply from canal, with flattenable hose, or PE pipe. Equipped with a self-propelled boom with central drive impeller and swivel joint for linear and rotary irrigation up to ...
-
Manufactured by Irtec S.p.A.based in ITALY
When the surface to be irrigated becomes important. The application of fluid dynamics comes to the aid of field work. Fully hydraulic system: lifting the trolley, lifting the drawbar, and rotating the ...
-
Manufactured by Irtec S.p.A.based in ITALY
When the surface to be irrigated becomes important. The application of fluid dynamics comes to the aid of field work. Fully hydraulic system: lifting the trolley, lifting the drawbar, and rotating the ...
-
Manufactured by Irtec S.p.A.based in ITALY
All-in-one irrigators ready to lift water before distributing it. The motor pump mounted on the frame allows water to be lifted directly from canals and, if necessary, it is ready as a booster ...
-
Manufactured by Irtec S.p.A.based in ITALY
All-in-one irrigators ready to lift water before distributing it. The motor pump mounted on the frame allows water to be lifted directly from canals and, if necessary, it is ready as a booster ...
-
Manufactured by Delta Delfini & Cia SAbased in ECUADOR
DELTA has over 30 years of experience manufacturing top quality and top efficiency axial and mixed flow pumps. Over 1,200 DELTA pumps are successfully used in 17 countries around the world under the most severe operating conditions. DELTA axial and mixed flow pumps represent the “bench mark” against which industry comparison is made for efficiency, reliability, functionality, and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
Manufactured by Irtec S.p.A.based in ITALY
Hydraulic lifting device of trolley. Hydraulic rotation of turntable. Hydraulic lifting of drawbar. Telescopic hydraulic feet. 4 Speed gearbox. Power take off. Turbine flanged on the gearbox with built-in by-pass. Flexible connection pipe. Galvanized raingun trolley mounted on variable track wheels. Raingun. Set of nozzles REFLEX raingun from Ø 24 to Ø 32. Set of nozzles EXPLORER ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
Self-propelled windrow turner for sewage sludge, organic and agricultural waste. Turning capacity of up to 3,000 m³ per hour dependent on material. Low fuel consumption. Comprehensive equipment as standard. Facilitates process improvement. Designed for ergonomic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you