Irrigator Equipment In Serbia
-
Manufactured by GEROVITbased in SERBIA
Continuous labyrinth or flat drippers; Extrusion technology utilizes high-quality specially developed polymers, renowned for their firmness and flexibility. These polymers were developed specially for use in heavy industrial and agricultural ...
-
Manufactured by Plastic Pugliabased in ITALY
PE100 High Density polyethylene pipes made in bars, complying with standards of UNI EN 12201, mainly used as pipelines of foodstuffs in irrigation. It is an alternative solution to sprinkler irrigation ...
-
Manufactured by Plastic Pugliabased in ITALY
HortoKIT is a system especially designed for irrigation of small orchards, even when there is lack of pressure water sources. Its main feature is the making installations based on drip irrigation technology totally powered by water gravity. The Kit consists of a Brico Aquadrop coil equipped with a series of fittings and accessories that ...
-
Manufactured by Plastic Pugliabased in ITALY
The machines which carry out and manage the ferti-irrigation are called "Fertirrigation benches" and consist of a set of pumps, mixer and valves, managed by electronic and/or computerized control units. These ones have been equipped with hydraulic systems and software that allow to manage irrigation and fertigation at the same time, ...
-
Manufactured by Plastic Pugliabased in ITALY
PLASTENE is a low density polyethylene pipe PE32, of black colour with extruded blue stripe on top, indelibly marked, manufactured with selected resins to guarantee long life and high reliability, complying with the rule UNI 7990:2015. PLASTENE pipe is suitable for the making of sub-irrigation systems, aerial, on open field and green ...
-
Manufactured by Plastic Pugliabased in ITALY
MOMO is a low density polyethylene pipe PE40, of black colour, with indelible mark and certificate of conformity issued by the Italian Institute of Plastics (IIP), complying with the rule UNI 7990:2015. MOMO pipe is mainly used in the installation of irrigation systems with high solar exposure, in the fire-fighting networks and in the ...
-
Manufactured by Plastic Pugliabased in ITALY
SIGMAPRES is a PE-100 high density polyethylene pipe complying with UNI EN 12201 standards and with the requirements of Decree No. 174 of 06/04/04 (G.U.N. 166 of 17/07/04) of the Italian Ministry of Health. This pipe is suitable for potable water, foodstuffs conveyance, irrigation systems and fire-fighting ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Gardening ― Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
Filter Body: Galvanized Steel or epoxy paint (upon request). Filter Element: Stainless steel Cartridge and 120/150 polyester screen - 120 mesh Lamellate Disk Cartridge. Discharge: BSP from ¾ "or 1". Working Pressures: 6 bar, hand closure -8 bar, bolted flange closure. Supplied Accessories:glycerine Bath STAINLESS steel Pressure Gauges (0 ÷ 10 bar) -Discharge Valve from ...
-
Manufactured by Plastic Pugliabased in ITALY
Used in: Greenhouse ― Open Field ― Tree ...
-
Manufactured by Plastic Pugliabased in ITALY
Aquanet INOX are self-cleaning screen filters, suitable for the treatment of fluids containing suspended solids, also of colloidal nature. The special suction pads guarantee an efficient cleaning of the filtering element with reduced water consumption and without flow interruption. Depending on the installation requirements, it is possible to choose between two different constructive ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
years research and development at Delta-T Devices. Benefiting from a number of important design innovations, the WET150 delivers research-grade accuracy and build quality at a price point not previously thought possible. This means growers can now integrate a true research-grade multi-parameter sensor into their precision irrigation and ...
-
Manufactured by SMART WATERINGbased in SERBIA
Install a standardized Smart Watering controller on your existing irrigation and fertilization system (no additional costs for remodeling infrastructure). ...
-
Manufactured by Plastic Pugliabased in ITALY
Single layer Lay flat PVC pipe with reinforced polyester mesh. AQUAFLAT PVC is a flexible, single-layer PVC pipe, reinforced by a high-strength polyester mesh, ideal for use as a manifold in drip irrigation systems, where is necessary to move installation in a frequent way. It Can also be used for irrigation with mini-sprinklers. AQUAFLAT ...
-
Manufactured by Plastic Pugliabased in ITALY
AQUAPRESS® is the latest generation dripperline with integrated flat emitter, basically equipped with three systems which guarantee functionality and reliability to long-life irrigation systems with slopes and sub-irrigation: Pressure – compensate System (PC): It assures a constant flow-rate depending on the operating pressure ...
-
Manufactured by Plastic Pugliabased in ITALY
Brico AQUADROP is a thin-walled black polyethylene hose with a blue stripe on top, with internally welded flat drippers manufactured by pre-ordered and constant spacing. Brico AQUADROP is suitable for drip irrigation on small and medium-sized installation, garden plants, hedges, balconies, terraces, etc. The inlet filters inside the ...
-
Manufactured by Plastic Pugliabased in ITALY
of the packaging and the ease of installation on the field, make this product versatile and practical one, especially for "DIY" irrigation installation. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you