Irrigator equipment in Washington

  • Nelson Irrigation - Model 800 Series - Control Valve

    The Manual On-Off model of the 800 Series Control Valve is a hydraulically operated sleeve type valve with a manual control function.

    By Nelson Irrigation Corporation based in Walla Walla, WASHINGTON (USA). from Irrigation Control Valves Product line

  • Nelson Irrigation - Model 75 Series - Big Irrigation Gun

    The 75 Series is a perfect fit for solid set irrigation, pivot end gun irrigation, sports field applications - to name a few.

    By Nelson Irrigation Corporation based in Walla Walla, WASHINGTON (USA). from Big Gun Sprinklers Product line

  • Toro - Model P-220S - Scrubber Series for Precise, Pressure Control

    Precise, pressure control option with compact EZReg (can be factory installed) dial design. Technology does not effect friction loss unlike competitive valves. Pressure regulates in electric or manual modes and is serviceable under pressure. Standard, built-in Schrader-type valve for downstream pressure verification. Five-year warranty.

    By HD Fowler Company based in Bellevue, WASHINGTON (USA). from Irrigation Product line

  • Nelson Irrigation Rotator - Model R5 - Micro Sprinkler for Full Coverage Irrigation

    The R5 Rotator is a micro sprinkler for Full Coverage Irrigation. It has higher uniformity, greater distance of throw, and provides better infiltration than comparable micro sprays or spinners. The flow control nozzle option is fully flow regulating at 15 psi (1 bar), while pressure compensation in other micro sprinklers begins to function at ...

    By Nelson Irrigation Corporation based in Walla Walla, WASHINGTON (USA). from Rotator Sprinklers Product line

  • Nelson Irrigation Rotator - Model R3000 - Pivot Sprinkler

    Nelson is leveraging recent progress in design and manufacturing technology to produce plates with complicated and advanced geometries. The result of these advances is the R3000 Rotator®, the world’s premier pivot sprinkler, featuring the widest throw on drops and highest uniformity. It operates on a proven, patented drive principle with ...

    By Nelson Irrigation Corporation based in Walla Walla, WASHINGTON (USA). from Pivot Products Product line

  • Model TX110/210 Series - Insertion Turbine Irrigation Flow Sensor

    The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Flow Monitoring Product line

  • Model J-95 - Micro Sprayer

    For many years, Fresno Valves & Castings, Inc. has been manufacturing vital components for low volume irrigation systems.  Our filters, valves and air vents just to name a few.  For the past several years, we have been developing and testing the newest in our line of quality products; the J-95 Micro Sprayer.   Reactions ...

    By Fresno Valves & Castings, Inc. Office in Kennewick, WASHINGTON (USA). from Low Volume Irrigation Product line

  • Model TX800-Serie - Insertion Turbine Irrigation Flow Sensor

    The TX800-Series are insertion turbine meters designed for use in 1-1/2' to 8' pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC. sensor bodies are machined from solid rod for maximum low-flow performance.TheTX800-Series use special fittings thatensure ease of ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Flow Monitoring Product line

  • Model AG2000 - Spool Type Electromagnetic Irrigation Flowmeter

    The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 3' to 12' pipe. With no moving parts, these meters provide unobstructed flow and are resistant to wear from debris found in ground or surface water. Little maintenance is required because there are no bearings to wear out or propellers to stop turning. ...

    By SeaMetrics, Inc. based in Kent, WASHINGTON (USA). from Irrigation Flow Monitoring Product line

  • Irrigation Switch On/Off Sensor

    Track irrigation events with the rest of your soil moisture data by recording when water is turned on and off.

    By METER Group, Inc. based in Pullman, WASHINGTON (USA). from Environmental Sensors Product line

  • GreyLink - Model GL-MDL-155 - Greywater Irrigation System

    Dual 150 mesh (100 micron) self-cleaning primary filter, 3.4 sq. ft. surface area, Triple 150 mesh (100 micron) secondary filter, Self-regulating filter wash system, 3/4 HP irrigation pump, 900 watt, 8.4 amps, 155v (230v also available), Auto-fill control for potable water supplementation, Auto-fill air gap for back flow prevention, Service debris ...

    By Flotender based in Woodinville, WASHINGTON (USA).

  • Irrigation Monitoring System

    Know When to Turn it On: Most irrigation systems rely exclusively on soil moisture sensors. Soil moisture sensors can't tell you how much of the water that's present is actually available to plants. This system uses an MPS-1 matric potential sensor to measure plant available water so you know when to turn the water ON. Know When to Turn it Off: ...

    By METER Group, Inc. based in Pullman, WASHINGTON (USA). from Environmental Monitoring Systems Product line

  • GreyLink - Model GL-HDL-390 - Greywater Irrigation System

    Dual 150 mesh (100 micron) self-cleaning primary filter, 6.8 sq. ft. surface area, Triple 150 mesh (100 micron) secondary filter, Self-regulating filter wash system, 1 HP irrigation pump, 1100 watt, 9.8 amps, 115v (230v also available), Auto-fill control for potable water supplementation, Auto-fill air gap for back flow prevention, Service debris ...

    By Flotender based in Woodinville, WASHINGTON (USA).

  • Soft Hose Reel

    With a Northwest soft hose reel your irrigation main line becomes portable. One man can easily lay out any length of hose for fast and efficient slurry pumping or irrigation. At Whatcom Manufacturing, Inc. we are committed to making sure every piece of equipment we produce satisfies the needs of our customers. With the customers in mind, the ...

    By Whatcom Manufacturing, Inc. based in Lynden, WASHINGTON (USA). from Dairy Equipment Product line

  • Edwards - Model BS8310 - Brush Spider

    The Model BS8310 Brush Spider is an ideal companion implement for the Edwards Front 3-Point Hitch. The Brush Spider is designed for sweeping leaves, pruning's and other debris from the tree row. The unit combines with weed sprayers, shredders and tillage tools for efficient single pass operation. When used with a mid-mounted spray boom, the clean ...

    By Edwards Equipment Company based in Union Gap, WASHINGTON (USA). from Attachments Product line

  • Premium

    AMS - Brown Moisture Probe

    The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) Distributor in Colfax, WASHINGTON (USA). from Soil Samplers - Soil Probes Product line

  • DYNA TRIM - Model DT5420 - Hydraulic Driven Mid Mounted Low Profile Mower

    The Edwards Model DT5420 Dyna Trim is a hydraulic driven, mid mounted, low profile mower designed for trimming around trees, posts, sprinkler risers, or other obstacles. The mid mount position permits combining the Dyna Trim with any three point mounted or trailing mower of sufficient width to overlap the mowed area of the Dyna Trim. The 31 inch ...

    By Edwards Equipment Company based in Union Gap, WASHINGTON (USA). from Mowing Equipment Product line

  • Agriculture / Dairy Applications

    Jim Vaughan invented the first chopper pump back in 1960, after working on local dairymen's pumps in his repair shop and realizing the need to 'chop' the solids while pumping.

    By Vaughan Company., Inc. based in Montesano, WASHINGTON (USA). from Applications Product line

  • Cobra Tanks - Stainless Steel Tanks

    Cobra Tanks has developed a patented method of building welded stainless steel tanks and silos on site. The innovative coil construction adds strength and ease to building circular tanks and silos, without lifting devices, requiring only a small crew. This method provides increased reinforcement eliminating the need for extra internal reinforcing ...

    By Cobra Tanks Inc based in Blaine, WASHINGTON (USA).

  • Circul8 - Aquatic Weeds & Algae

    Aquatic Weeds & Algae have certain requirements to thrive. Typically those requirements include very quiet water, shallow water, and a nutrient source (a sludge blanket at the bottom of the pond). Ornamental ponds are challenging because eutrophication processes can happen so fast in such a limited space. We have all watched a glass fish tank, ...

    By Circul8 Systems based in Reardan, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you